AEOTEC Range Extender

 

$68.99

Availability: In Stock

Range Extender 6.

The Range Extender 6 keeps it reliable. We all know how annoying weak wireless signals can be. Weak WiFi and poor phone signals are frustrating. Imagine if your smart home was also plagued by weak wireless signals and the same frustrations? Your smart home would not be very smart. The Range Extender 6 from Aeotec ensures that your connected home stays connected. It intelligently listens to the commands and reports that your Z-Wave network sends, actively capturing weak signals and then amplifying and repeating them.

ZW117c

1 in stock

SKU: DHS-CON-REXT-AEO Categories: , , Tags: , ,

Description

Product Description

Repeats wireless signals.

Repeats wireless signals.For your smart home to be perfect, its wireless signals need to be reliable. Range Extender 6 captures weak or slow signals and efficiently repeats them on to the rest of your Z-Wave network.

Amplifies wireless signals.

Amplifies wireless signals.Not only does Range Extender 6 accurately repeat Z-Wave signals, it amplifies them too and helps improve the reliability and accuracy of your Z-Wave network.

Big on impact. Small in size.

Range Extender 6 is a power-outlet friendly device, designed to be as small and as compact as possible without compromising on performance. so that it doesn’t block neighbouring power outlets.

Product Support

Works with VeraAeotec LED Bulb with Vera

Manuals:

⇒  Aeotec Range Extender 6 product manuals

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz – AU/NZ  approved RF for Z-wave
Z-Wave device type
Amplifier
Power
240V AC
Operation Range
Up to 150m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
white
Weight
50g
Housing
ABS
Size
43mm x 40mm x 16mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Quick Comparison

SettingsAEOTEC Range Extender removeAEOTEC Multisensor 6 removeAEOTEC Nano WallSwipe removeAEOTEC Flood Sensor Dock removeAEOTEC Nano Dimmer Bypass removeAEOTEC Nano Sgl Switch InWall remove
Image
SKUDHS-CON-REXT-AEODHS-SNS-MS-AEODHS-LIT-SWIPE-AEODHS-SNS-FL-AEO-RECDHS-LIT-BPASS-AEODHS-LIT-SWW-AEO-01
Rating
Price$68.99$79.99$88.99$34.99$22.99$86.99
Stock

1 in stock

12 in stock

11 in stock

2 in stock

2 in stock

4 in stock

Availability1 in stock12 in stock11 in stock2 in stock2 in stock4 in stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionRange Extender 6. The Range Extender 6 keeps it reliable. We all know how annoying weak wireless signals can be. Weak WiFi and poor phone signals are frustrating. Imagine if your smart home was also plagued by weak wireless signals and the same frustrations? Your smart home would not be very smart. The Range Extender 6 from Aeotec ensures that your connected home stays connected. It intelligently listens to the commands and reports that your Z-Wave network sends, actively capturing weak signals and then amplifying and repeating them. ZW117cMotion for security. Motion for presence. Motion for management. The AETOEC MultiSensor 6 is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, the AEOTEC MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – the AEOTEC MultiSensor 6 makes your home automation system more powerful and more intelligent. ZW100aZW100a1WallSwipe integrates with Aeotec's Nano Dimmer, Nano Switch or Nano Shutter in-wall controllers to offer intelligent and convenient capacitive wall switch and motion switch control. WallSwipe includes a screw-less switch plate compatible with Australian wall switch installations. Aeotec Nano WallSwipeAeotec Nano WallSwipe2 The technical specifications of Aeotec WallSwipe can be viewed at that link. Package contents:
  1. 2x Screws
  2. 1.5mm JST connection cable

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

It contains small parts; keep away from children.
Pro-tool. Pro-tection. Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available. ZW160a What Dock enhances. Monitor 2 areas. Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6. Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1” thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas. ZW160d Monitor a whole area. Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler. While you can be sure that leaks will happen, you can’t always be sure where they will happen. That’s particularly true when it comes water tanks and boilers. While they will leak, it’s impossible to know from where they’ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it. ZW160cStop dimmed lights flickering. Dimming energy-saving lights is complicated – there’s a lot of different technologies built into modern bulbs. That’s why dimmed lights sometimes flicker or remain on – power trickles through. The AEOTEC Dimmer Bypass works with the AEOTEC Nano Dimmer to remove the signals from your power line that cause low-watt lightbulbs to flicker. z wave bypass dimmer If you want to control low-voltage lighting that uses less than 4 Watts using an AEOTEC Nano Dimmer you will need to include the AEOTEC Dimmer Bypass in your installation to ensure the lights do not flicker.Control any switch. From anywhere. Wirelessly. Power sockets and light switches: amazing inventions. They literally changed the world. But if you’re not standing right next to them or can’t reach them, they’re limited. No more. The future is smarter. So is your home. The AEOTEC Nano Switch InWall offers completely wireless control of your switches and sockets. ZW116a The AEOTEC Nano Switch offers total control, easily. Impossibly small, each AEOTEC Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install the AEOTEC Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
Content

Product Description

Repeats wireless signals. Repeats wireless signals.For your smart home to be perfect, its wireless signals need to be reliable. Range Extender 6 captures weak or slow signals and efficiently repeats them on to the rest of your Z-Wave network. Amplifies wireless signals. Amplifies wireless signals.Not only does Range Extender 6 accurately repeat Z-Wave signals, it amplifies them too and helps improve the reliability and accuracy of your Z-Wave network. Big on impact. Small in size. Range Extender 6 is a power-outlet friendly device, designed to be as small and as compact as possible without compromising on performance. so that it doesn’t block neighbouring power outlets.

Product Support

Works with VeraAeotec LED Bulb with Vera Manuals: ⇒  Aeotec Range Extender 6 product manuals

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Amplifier
Power
240V AC
Operation Range
Up to 150m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
white
Weight
50g
Housing
ABS
Size
43mm x 40mm x 16mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Motion sensor. Motion sensor. Motion for security. Motion for presence. Motion for management. The AEOTEC MultiSensor 6 is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, the AEOTEC MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – the AEOTEC MultiSensor 6 makes your home automation system more powerful and more intelligent. Temperature sensor. From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The AEOTEC MultiSensor 6 provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes back to a smart home gateway. ZW100d1 Light sensor. Automated lighting is only as smart as the system that powers it. With the AEOTEC MultiSensor 6’s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC MultiSensor 6 is the smarts behind smart lighting. ZW100d2 Humidity sensor. Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. The AEOTEC MultiSensor 6 offers incremental monitoring of humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. The AEOTEC MultiSensor 6 monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect. ZW100d3 Vibration sensor. It measures the environment it’s in, and it also measures itself. The AEOTEC MultiSensor 6 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the AEOTEC MultiSensor 6 – it’ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They’ll also be able to detect seismic activity within your home. ZW100d4 UV sensor. Perfectly managing an environment means understanding it perfectly. The AEOTEC MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured in line with the World Health Organisation’s UV Index, the AEOTEC MultiSensor 6 measures a room’s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.   ZW100d5

Product Support

The perfect sensor comes with the perfect accessories. The AEOTEC MultiSensor 6 has four different accessories, each designed to make the installation of the sensor perfect for your home. ZW100d Recessor. (sold separately) Install the AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. Discrete and for corner installations, the mounting arm allows you to rotate your AEOTEC MultiSensor 6 up to 360° and refine its field of view by up to 50°. USB cable. After 2 years you won’t have to change batteries if you power your AEOTEC MultiSensor 6 via mains power using the provided 1.5 metre USB cable. Tape. Weighing only 74 grams, the AEOTEC MultiSensor 6 can be easily installed with just the provided double-sided tape from 3M. Manuals: ⇒ Aeotec Multisensor 6 product manual Works with VeraAeotec LED Bulb with Vera copy

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
USB DC 4.75V to 5.25V
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
White
Weight
74g
Housing
ABS
Dimensions
(LxWxH) 28mm x 28mm x 42mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Support

Manuals: ⇒  WallSwipe for Nano user guide

Technical Specifications

RF Protocol
None
RF Frequency
None
Device type
Sensor
Power
Low voltage
Operation Range
Near Z-Wave module
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
-10 ~ 50 °C
Colour
White
Weight
50g
Housing
ABS
Dimensions
105 x 42 x 34mm
Warranty 12 Months

Product Description

Power optimised. Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6’s battery acts as an emergency backup. Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don’t even have to use them. But if you do, Water Sensor 6’s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock. Wireless optimised. Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to. In the box. 3M double side adhesive tape. Desktop style of adapter without pins. Dock for Water Sensor 6. Mounting screws. Spot sensing rope x 2. USB cable for optional power supply.

Product Support

Manuals: ⇒ Aeotec Dock for Water Sensor 6 product manual Aeotec LED Bulb with Vera copy

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Device Dock
Power
USB, batteries
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
White
Weight
70g
Housing
ABS
Dimensions
120mm x 61mm x 33mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Compatible bulbs. There are a lot of different types of low-power light bulbs that your home may have; Bypass has been designed to work with most of them. It’s been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.

Product Support

Wiring diagram. ZW150w 3-wire connection with neutral and bypass load. ZW150w1 2-wire connection without neutral and bypass load.   Manuals: ⇒  Aeotec bypass for Nano Dimmer product manual

Technical Specifications

Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
black
Weight
10g
Housing
ABS
Size
(0.98 x 0.39 x 0.75 in)
Warranty 12 Months

Product Description

Once installed behind a switch or socket, the AEOTEC Nano Switch offers unparalleled wireless control via Z-Wave protocol. It lets you control, automate, and monitor your lights light and power sockets. From anywhere. Anytime. And it does it all through enhancement – with the AEOTEC Nano Switch, your sockets and switches don’t have to be replaced and they’ll continue to offer the same manual control that you’re used to. ZW098 B22dd

Product Support

Since the AEOTEC Nano Switch also supports the 24VDC power input,  you can also use it to control loads powered by 24VDC (see user manual) Works with VeraAeotec LED Bulb with Vera Manuals: ⇒  Aeotec Nano Switch product manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Switch
Power
240V AC
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
white
Weight
50g
Housing
ABS
Size
42mm x 40mm x 25mm
Compliance
Z-Wave Plus certified
Warranty 12 Months
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information