HOMEKIT THE BUTTON RED

 

$84.99

Availability: In Stock

With a simple tap, the Fibaro Homekit Button lets you control various HomeKit-enabled devices such as lighting, fans, window shades, and locks. You can also run scenes, triggering them with one tap, two taps, or by holding the button down. Conveniently place or mount the Button anywhere in your houses, such as a bedside nightstand, kids’ room, or kitchen counter. The Button also comes in different colours for easily assigning family members individual buttons programmed with their own personal commands.

24 in stock

SKU: FGHPB-101-3 Categories: , , Tags: ,

Description

With a simple tap, the Fibaro Homekit Button lets you control various HomeKit-enabled devices such as lighting, fans, window shades, and locks. You can also run scenes, triggering them with one tap, two taps, or by holding the button down. Conveniently place or mount the Button anywhere in your houses, such as a bedside nightstand, kids’ room, or kitchen counter. The Button also comes in different colours for easily assigning family members individual buttons programmed with their own personal commands.

Quick Comparison

SettingsHOMEKIT THE BUTTON RED removeFIBARO Single Smart Module FGS214 removeFIBARO Z-Wave Button (Yellow) removeFIBARO Home Center 3 removeFIBARO Z-Wave Roller Shutter 3 removeFIBARO D/W Sensor 2 (Black) remove
Image
SKUFGHPB-101-3DHS-LIT-SWW-FIB-214DHS-CON-SBUT-FIB-YLDHS-CON-HC3-FIBDHS-WIN-BLD-FIB-3DHS-SNS-DW-FIB-BL-02
Rating
Price$84.99$84.99$78.00$799.99$84.99$73.99
Stock

24 in stock

9 in stock

1 in stock

4 in stock

20 in stock

Out of stock

Availability24 in stock9 in stock1 in stock4 in stock20 in stockOut of stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Read more

DescriptionWith a simple tap, the Fibaro Homekit Button lets you control various HomeKit-enabled devices such as lighting, fans, window shades, and locks. You can also run scenes, triggering them with one tap, two taps, or by holding the button down. Conveniently place or mount the Button anywhere in your houses, such as a bedside nightstand, kids' room, or kitchen counter. The Button also comes in different colours for easily assigning family members individual buttons programmed with their own personal commands.The new?FIBARO Smart Module(FGS-214) is a smart Z-Wave wireless module that can control a maximum load of 6.5A? in one channel.
  • Control the ON-OFF function of one circuit or appliance remotely or using a wall switch
  • Can be used as voltage free relays (dry contacts)
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling
  • Latest generation Z-Wave 500 series chip
  • Z-Wave Plus certification
  • Very accurate energy measurement +/- 1 % for power above 5W
  • Supports secure mode (Z-Wave Network Security) encrypted with AES-128
  • Dry contacts?- this is important. It means that the new FGS-214 can be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)
Home Center 3 is the latest smart home management controller from Fibaro Group. Advanced technology within its components guarantees the highest stability and performance of the FIBARO System.

PRODUCT HIGHLIGHTS

  • Cutting-edge speed & stability,
  • 4x1,2GHz processor, 2 GB RAM of memory,
  • Seamless integration with over 2000 third-party products operating in various technologies,
  • Fast configuration process,
  • Simple and complex automations, like Block Scenes, LUA events, Quick Apps,
  • Unquestionable, triple data security system,
  • Future-proof - lasts for years, maintaining top performance,
  • Ingenious and refined design.
The Fibaro Roller Shutter Controller is designed to control blind, awning, garage door and gate motors.
  • Supports five different types of motor systems
  • Precise positioning of blind or awning
  • Automatic calibration
  • Wireless control of AC motors with "three wires" interface
  • Monitor and analyse energy usage
FIBARO Roller Shutter 3 (FGR-223) is a new Z-Wave Plus version of its predecessor model Fibaro Roller Shutter 2.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification
Content
With a simple tap, the Fibaro Homekit Button lets you control various HomeKit-enabled devices such as lighting, fans, window shades, and locks. You can also run scenes, triggering them with one tap, two taps, or by holding the button down. Conveniently place or mount the Button anywhere in your houses, such as a bedside nightstand, kids' room, or kitchen counter. The Button also comes in different colours for easily assigning family members individual buttons programmed with their own personal commands.
The?FIBARO Smart Module(FGS-214)?is a smart Z-Wave controller capable of remotely operating your existing light and appliance fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene. The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician. This?FIBARO Smart Module?(FGS-214)?requires 3-wire (including neutral) installation and works with an AC (230V) power supply. The?FIBARO Smart Module?(FGS-214)?also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits. This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers -?Fibaro Home Center 3/2/Lite

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using Fibaro?s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active or the type of manual switch connected to a Z-Wave light controller. Every available configurable parameter is listed in your device?s user manual. In most cases, your device?s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. Please check the maximum load before installing or operating.? This installation must be done by a certified electrician in Australia and New Zealand. Before engaging an electrician, check that they provide an electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.

Documentation

FIBARO Smart Module Manual

Technical Specifications

RF Protocol
Z-Wave
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z?Wave device type
Z-Wave Switch, Routing Slave
Power
230V?? 10% 50/60 Hz
Operation Range
Up to 20 m indoors with no obstacles
Application
Indoor use only, up to 6.5A?load
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Weight
50g
Housing
ABS
Compliance
EN 55015, EN 60669-2-1
Regulatory Compliance Mark
N5496
Dimensions
(LxWxH) 42mm x 37mm x 17mm

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Power
ER14250 ? AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Storage temperature
?10 ~ 50 ?C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS

Product Details

Home Center 3 is the latest smart home management controller from Fibaro Group. Advanced technology within its components guarantees the highest stability and performance of the FIBARO System. Z-Wave chip 500 brings an exceptional number of hundreds of integrations with other brands products, which you can use while controlling electronics and household appliances, lighting, blinds, HVAC, alarm, monitoring or watering system - with just a single button, gesture or word. View the full presentation here. Aditional protocols will be enabled later this year:
  • ZigBee: 2405-2480MHz

  • Wi-Fi: 802.11 b/g/n/a/ac

  • 433MHz: 433.54-433.92 MHz (OOK, FSK, GFSK)

  • Bluetooth: Low Energy 2402-2480MHz

For light users, we also provide a smaller, less expensive system, the FIBARO Home Center 3 Lite.

Technical Specification

RF Protocol
Z-Wave (ZigBee, Wi-Fi, 433MHz later this year)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Controller
Processor
Quad-core Arm Cortex A53 (1.2GHz)
Power
12VDC with 240V AC adapter
Hardware
RAM 2GB LPDDR3
8GB eMMC
Operation Range
Up to 30m indoors with no obstacles
Application
Indoor use only
Operation Temperature
-10 ~ +40 ?C
Storage Temperature
-10 ~ 70 ?C, humidity 5~75% RH (max)
Weight
1.1 kg
Housing
Aluminium
Compliance
C-Tick, RCM

Product Details

The Fibaro Roller Shutter 3 (FGR-223) is an advanced Z-Wave controller for automated roller blinds, awnings, venetian blinds, garage doors and gates. The module can control devices that are powered by an AC electric motor with a "three wire" interface. The Roller Shutter module features automatic calibration so that you can precisely position the blind. It also includes a power metering feature to help you measure power consumption. The Fibaro Roller Shutter 2 has five modes that enable it to perfectly control any electric garage door, gate, roller blind, awning or Venetian blind. This allows for the correct configuration and operation of a device through a special interface icon (via the Fibaro HC2).
  • Roller blinds with positioning
  • Roller blinds without positioning
  • Garage doors with positioning
  • Garage doors without positioning
  • Venetian blind

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera?s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller. Every available configurable parameter is listed in your device?s user manual. In most cases your device?s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section. This product must be installed by a qualified electrician. Before engaging an electrician, check that they provide a warranty and electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.

Technical Specifications

RF Protocol Z?Wave Plus
RF Frequency 921.42Mhz ? AU/NZ ?approved RF for Z?wave
Z?wave device type Z-Wave multiple level dimmer, routing slave
Power 110 - 230 V ?10% 50/60Hz
Operation Range Up to 20m indoor when no obstacles
Application Indoor use only
Operation temperature 0 ~ 55 ?C
Motor Load max ?up to 1kW
Storage temperature ?10 ~ 80 ?C
Weight 50g
Housing ABS
Compliance C-Tick, EU standards EN 55022, EN 61000
 

Documentation

Fibaro Z-Wave Roller Shutter 3

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.

Documentation

FIBARO Z-Wave Door/Window Sensor 2 User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z?Wave device type
Z-Wave binary sensor, multilevel command supported
Power
One battery, type ER 14250 1/2AA 3.6V (included)
Operation Range
Up to 30m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Temperature Measuring Accuracy
?0.5?C
Temperature Measuring Range
0 ~ 60?C
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 71mm x 18mm x 18mm
Compliance
AS/NZS 4268:2003+A1+A2
Regulatory Compliance Mark ?Z1535
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information