QUBINO Temperature Sensor

 

$24.99

Availability: In Stock

The QUBINO Temperature Sensor (by GOAP) is capable of measuring temperatures between -50°C ~ 125°C with 0.5°C accuracy.

  • 1m long cable
  • Connects directly to any GOAP module
  • Integrates with; VeraEdge, VeraPlus, Zipato, NETIC

Note: This product is currently not supported by Fibaro gateways.

4 in stock

SKU: DHS-SNS-TMP-QUB Categories: , Tags: ,

Description

Technical Specifications

Product Name 
 Temperature sensor
Temperature range -50°C – 125°C range
Temperature accuracy
0.5°C
Dimensions (W x H x D)
1 m

Quick Comparison

SettingsQUBINO Temperature Sensor removeAEOTEC Recessed D/W Sen removeDHS Active Infrared Sensor removeAEOTEC TriSensor removeDHS Garage Roller Limit Switch removeFIBARO D/W Sensor 2 (Black) remove
Image
SKUDHS-SNS-TMP-QUBDHS-SNS-DW-AEO-RECDHS-SNS-AIR-DHSDHS-SNS-MS-AEO-03DHS-SNS-LS-DHS-01DHS-SNS-DW-FIB-BL-02
Rating
Price$24.99$78.99$39.99$64.99$19.99$72.99
Stock

4 in stock

Out of stock

Out of stock

Out of stock

5 in stock

Availability4 in stockOut of stockOut of stockOut of stock5 in stock
Add to cart

Add to basket

Add to basket

Read more

Read more

Read more

Add to basket

DescriptionThe QUBINO Temperature Sensor (by GOAP) is capable of measuring temperatures between -50°C ~ 125°C with 0.5°C accuracy.
  • 1m long cable
  • Connects directly to any GOAP module
  • Integrates with; VeraEdge, VeraPlus, Zipato, NETIC
Note: This product is currently not supported by Fibaro gateways.
The Z-Wave door sensor is finally invisible. At less than 0.4” in width some might call it small and compact. We prefer to call it invisible. It’s the Z-Wave door sensor that’s been designed as the door sensor should have always been. Powerful but invisible. Recessed Door Sensor is a clever piece of technology that installs simply within your door’s frame. It’s as beautiful as the rest of your home. You never see it; you just feel its benefits. Recessed Door Sensor 7, Z-Wave Plus ZW089d Perfect sensor. Perfect compatibility. With its foundation resting upon Z-Wave Plus, the Recessed Door Sensor is compatible with leading Z-Wave gateways and backends out of the box. Z-Wave Plus V2 Door Sensor, built on the Aeotec 700 series, will deliver a significantly improved experience by mandating the inclusion of SmartStart, a setup feature that will truly bring plug and play to your smart home. Comprised of two parts: the Main Sensor and the Magnetic Sensor. Comprised of two parts: the Main Sensor and the Magnetic Sensor.The Active Infrared Sensor is part of the sensors family that creates an invisible infrared beam between the two units which can be placed up to 20 metres apart. The trigger activates when someone or something moves through and breaks the beam. This sensor can be connected with any binary Z-Wave sensor to be a part of the Z-Wave ecosystem. Ideal for nursing care of the elderly, monitoring of children's movements, monitoring doorways, windows, detering and warning of unwanted intruders etc. Please note: Power supply 12V is required.TriSensorP Three different sensors built into the AEOTEC TriSensor's small finish. A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters. sensor functionalityThe DHS Garage Roller Limit Switch can be connected with any binary Z-Wave sensors such as the FIBARO Z-Wave Door/Window Sensor to report the status of your garage door to your Z-Wave gateway. Roller Limit SwitchRoller Limit Switch ActionRoller Limit Switch 2 Note: A Z-Wave sensor is not included with this device.The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification
Content

Technical Specifications

Product Name 
 Temperature sensor
Temperature range -50°C - 125°C range
Temperature accuracy
0.5°C
Dimensions (W x H x D)
1 m

Product Description

2+ year battery life. Z-Wave Plus V2 Door Sensor Changing the battery is as simple as lifting Recessed Door Sensor out of your door, swapping the battery, and inserting the sensor back into your door. Perfect wireless. Security sensors have to be dependable. Recessed Door Sensor is. Its wireless communication range reaches Z-Wave’s maximum: up to 150 metres / 492 feet when unobstructed. Gen7. A security sensor has to be secure. Recessed Door Sensor couples Z-Wave Plus with Aeotec’s Gen5. That enables the sensor to utilise AES 128-bit communication encryption in order to secure your home. Z-Wave Plus. Furthering your ability to depend upon it, the Recessed Door Sensor is built upon the latest version of Z-Wave, Z-Wave Plus. That enables the sensor to communicate 250% faster and with 50% less battery use than older sensors. Smart Door Senor- Removing the complexity of installation, with a quick app scan of its QR code, drastically shortening and simplifying the product setup process for you. Safer than the previous generation. Comes with Z-Wave Security 2 (S2) framework which is the most advanced security for smart home devices and controllers, gateways and hubs in the market today, it’s better to protect your family.

Product Support

Anytime and anywhere, giving you a full sense of security. Compatible with Fibaro HC3, Fibaro HC3Lite, Yubii, Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 921.42 MHz Works with VeraAeotec LED Bulb with Vera   Manuals: ⇒  Aeotec Recessed Door Sensor Gen7 product manuals

Technical Specifications

RF Protocol
Z-Wave Plus (700 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Binary sensor
Power
3 V DC, CR123A
Operation Range
Up to 150m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
white
Weight
50g
Housing
ABS
Size
43mm x 40mm x 16mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Technical Specifications

Product Name 
Active Infrared Sensor
Type
Single Beam
Operation Range
20m
Power
DC/AC 12 to 24V (not in the set)
Wave Length
940nm
Infra-red Frequency
1.92Khz
Operation temperature
-20°C to 70°C
Input RX 15mA~TX 30mA
Net Weight
93g
Housing
ABS
Size (Each One)
7.5 x 4.8 x 3cm

Product Description

Motion sensor Motion sensor. Motion for security. Motion for presence. Motion for management. The AEOTEC TriSensor is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data. The AEOTEC TriSensor makes your home automation system more powerful and more intelligent. Temperature sensor. From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The AEOTEC TriSensor provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 °C and reporting those temperature changes back to a smart home gateway. Light sensor. Automated lighting is only as smart as the system that powers it. With the AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor is the smarts behind smart lighting. The perfect sensor comes with the perfect accessories. The AEOTEC TriSensor has three different accessories, each designed to make the installation of the sensor perfect for your home. Place it anywhere. Installation Recessor. (sold separately) Install the AEOTEC TriSensor in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. Discrete and for corner installations, the mounting arm allows you to rotate your AEOTEC TriSensor to best ensure motion is detected when you want it to be. Tape. Weighing only 52 grams, the AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.

Product Support

Manuals: ⇒ Aeotec TriSensor product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
1 x CR123A battery
Operation Range
Up to 150m outdoors without obstacles
Operation temperature
0 - 70 °C
Storage temperature
-10 - 80 °C
Colour
White
Weight
52g
Housing
ABS
Dimensions
45mm x 45mm x 35mm
Compliance
Z-Wave Plus certified
Warranty 12 Months
The DHS Garage Roller Limit Switch is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.

Technical Specifications

Product Name 
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20°C to 70°C
Service life Mechanically: 10,000,000 operations min.
Net Weight
100g
Housing
ABS, aluminium
Size 
10.5 x 2.8 x 3cm

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.

Documentation

FIBARO Z-Wave Door/Window Sensor 2 User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave binary sensor, multilevel command supported
Power
One battery, type ER 14250 1/2AA 3.6V (included)
Operation Range
Up to 30m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Temperature Measuring Accuracy
±0.5°C
Temperature Measuring Range
0 ~ 60°C
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 71mm x 18mm x 18mm
Compliance
AS/NZS 4268:2003+A1+A2
Regulatory Compliance Mark  Z1535
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information