SHELLY Humidity & Temperature Sensor White
Shelly Humidity & Temperature Sensor H&S Smart Home Automation WiFi Solution
Shelly Humidity & Temperature Sensor helps with monitoring changes in humidity and temperature while avoiding dryness and keeping comfortable conditions at your home.
Wireless: Connect Shelly Humidity & Temperature Sensor directly to your Wi-Fi network, without the need for any additional controller.
Humidity: Monitor excessive changes in humidity. Avoid dryness and conditions for mould growth.
Temperature control: Be aware of temperature fluctuations and keep your home comfortable at any time.
Easy to use: The only thing you need to manage your Shelly H&T is a mobile phone and the Shelly Cloud app.
Long-lasting battery: Feel more comfortable with Shelly H&T’s long-lasting battery life of up to 16 months.
With Shelly Humidity & Temperature Sensor you can see recorded data for humidity and temperature for up to a year.
USB power supply: An optional accessory that allows you to power the device with a cable instead of a battery
Monitor remotely: Monitor your home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices.
CONTROL ANY ELECTRIC HEATER
Turn the cheapest heaters into the smartest devices with Shelly Humidity & Temperature Sensor and Shelly Plug – you can automatically control any electric heater.
Shelly Humidity & Temperature Sensor records all the data for humidity and temperature.
Long-Lasting Battery Life
A perfect design combined with a battery lasting up to 16 months keeps your home always comfortable.
Shelly Humidity & Temperature Sensor (H&T) is open to the world and developers. Shellys are secured but at the same time give everyone the opportunity to use them easily in new and existing projects. With the embedded web server and the HTTP commands Shelly can be made compatible with your existing home automation system.
This product is approved for use in Australia but must be installed by a licensed electrician.
438 in stock
|Settings||SHELLY Humidity & Temperature Sensor White remove||QUBINO Temperature Sensor remove||AEOTEC Flood Sensor Dock remove||AEOTEC Flood Sensor 6 remove||FIBARO D/W Sensor 2 (White) remove||AEOTEC MultiSensor Recessor remove|
438 in stock
4 in stock
2 in stock
Out of stock
7 in stock
12 in stock
|Availability||438 in stock||4 in stock||2 in stock||Out of stock||7 in stock||12 in stock|
|Add to cart|
Shelly Humidity & Temperature Sensor H&S Smart Home Automation WiFi SolutionShelly Humidity & Temperature Sensor helps with monitoring changes in humidity and temperature while avoiding dryness and keeping comfortable conditions at your home.
365-DAY HISTORYShelly Humidity & Temperature Sensor records all the data for humidity and temperature. Long-Lasting Battery Life A perfect design combined with a battery lasting up to 16 months keeps your home always comfortable.
FOR DEVELOPERSShelly Humidity & Temperature Sensor (H&T) is open to the world and developers. Shellys are secured but at the same time give everyone the opportunity to use them easily in new and existing projects. With the embedded web server and the HTTP commands Shelly can be made compatible with your existing home automation system. This product is approved for use in Australia but must be installed by a licensed electrician.
|The QUBINO Temperature Sensor (by GOAP) is capable of measuring temperatures between -50°C ~ 125°C with 0.5°C accuracy.
||Pro-tool. Pro-tection. Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available. What Dock enhances. Monitor 2 areas. Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6. Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1” thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas. Monitor a whole area. Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler. While you can be sure that leaks will happen, you can’t always be sure where they will happen. That’s particularly true when it comes water tanks and boilers. While they will leak, it’s impossible to know from where they’ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.||Water Sensor 6. Flood sensor. Leak sensor. Safety sensor. Water Sensor 6. Your home’s 6th sense. We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs. Total Control. Water Sensor 6 monitors your home. Leaks & bursts. Water Sensor 6 can detect minuscule amounts of water – as little as 0.5mm / 0.02” of water. That makes it your first line of defence against damaged plumbing. Floods. Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements. Overflows. Accidents happen but that doesn’t make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you’ve forgotten to turn off before it’s too late.||The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
||Smart sensors. Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the AEOTEC MultiSensor 6 and AEOTEC TriSensor allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.|
Product DescriptionPower optimised. Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6’s battery acts as an emergency backup. Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don’t even have to use them. But if you do, Water Sensor 6’s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock. Wireless optimised. Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to. In the box. 3M double side adhesive tape. Desktop style of adapter without pins. Dock for Water Sensor 6. Mounting screws. Spot sensing rope x 2. USB cable for optional power supply.
Product SupportManuals: ⇒ Aeotec Dock for Water Sensor 6 product manual
Product DescriptionThe leak sensor with sensors. Water Sensor 6 is a part of the AEOTEC Z-Wave intelligence range. It’s been designed to protect your home and it’s also been designed to make your smart home smarter. Three separate sensors are crafted into each Water Sensor 6. Each of these sensors can be used to create intelligent home control scenarios via your Z-Wave gateway including the management of underfloor heating, HVAC control, and driveway heating. Water sensor. 4 gold tipped water probes actively monitor for leaks and drips. Vibration sensor. Tamper and emergency events are confirmed by an algorithm that includes vibration detection. Temperature sensor. Crafted for heating management, an inbuilt temperature sensor can monitor temperatures between -20ºC and 100ºC.
Product SupportManuals: ⇒ Aeotec Water Sensor 6 product manual
Product DetailsThe FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
DocumentationFIBARO Z-Wave Door/Window Sensor 2 User Manual
Product DescriptionStill perfectly powered. Whichever power method you’re using with your multi-sensor, you can keep on using it with the AEOTEC Recessor. The AEOTEC Recessor has been designed to allow for each sensor’s batteries to still easily be changed, or for the AEOTEC MultiSensor 6’s optional power cable to be used if you prefer to power your sensor without batteries. Still precise. The AEOTEC Recessor doesn’t just convert the AEOTEC MultiSensor 6 into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor. Once recessed, your AEOTEC MultiSensor 6 can be angled up to 30º within the Recessor, fine tuning its measurements and readings to be just where you need them.
Product SupportThe perfect accessories. The AEOTEC MultiSensor 6 ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home. Recessor. Install the AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. (sold separately) Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360° and refine its field of view by up to 50°. USB cable. (sold separately) After 2 years you won’t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable. Tape. Weighing only 74 grams, the AEOTEC MultiSensor 6 can be easily installed with just the provided double sided tape from 3M. Manuals: ⇒ Aeotec Multisensor 6 product manual