The Aeotec Z-Stick (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices.
Create your own Z-Wave gateway. With Z-Stick Gen5 you?ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. You?ll benefit from a system that is locally hosted and cloud-free, whose features, security and privacy you can personally control, and you?ll be able to create your Z-Wave network at your own pace and within your own budget. Capable of controlling up to 232 different Z-Wave devices, including those that use the more advanced Z-Wave Plus, and able to run on both full-powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with open source software such as Domoticz, Home Assistant, OpenHab, and OpenHab2 and also works with commercially available software such as Axial Control, Homeseer, Indigo for MacOS. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.
Product Support
Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.
Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices.
Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wireless firmware upgrades. Compatible with Z-Wave enabled home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2.
No software included.
The Aeotec Z-Stick (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices.
On any wall.
The?AEOTEC WallMote?is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, the?AEOTEC WallMote?is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.
Simple to install.
The?AEOTEC WallMote?is the wall switch for anywhere. You can mount it in just two steps!
Attach the mounting plate.
Attach the mounting plate. The?AEOTEC WallMote?s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.
Attach WallMote.
The?AEOTEC WallMote?is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.
The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controllers outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you?ll be amazed at just how much functionality we were able to craft inside.
Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don?t. But perfect lighting has never been easy.
Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you?ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you?re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache.
No more. Nano Dimmer offers smart, connected lighting without any of the hassles.
Motion for security. Motion for presence. Motion for management. The?AETOEC MultiSensor 6?is perfect for more than just an intelligent security system. With a 5 metre range and a 120? field of view, the?AEOTEC MultiSensor 6?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data ? the?AEOTEC MultiSensor 6?makes your home automation system more powerful and more intelligent.
Pro-tool. Pro-tection.
Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.
What Dock enhances.Monitor 2 areas.
Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.
Monitor a whole area.
Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.
Control any switch. From anywhere.?Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you?re not standing right next to them or can?t reach them, they?re limited.?No more. The future is smarter. So is your home. The?Aeotec Smart Switch 6?offers completely wireless control of your switches and sockets.
Enhancing a power outlet near you.
Every country is different. And we?ve engineered a different plug for every country. Within the dramatically small size of the?Aeotec Smart Switch 6?lies engineering focused not just on intelligence and reliability, but also on safety. From Australia to Andorra, from the United States to the United Kingdom, every?Aeotec Smart Switch 6?has been custom engineered to maximize the volts and amperage it can offer without ever compromising on quality or your safety.
The?Aeotec Smart Switch 6?isn?t just a smart switch, it?s a safe switch.
Content
Product Description
Create your own Z-Wave gateway. With Z-Stick Gen5 you?ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. You?ll benefit from a system that is locally hosted and cloud-free, whose features, security and privacy you can personally control, and you?ll be able to create your Z-Wave network at your own pace and within your own budget. Capable of controlling up to 232 different Z-Wave devices, including those that use the more advanced Z-Wave Plus, and able to run on both full-powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with open source software such as Domoticz, Home Assistant, OpenHab, and OpenHab2 and also works with commercially available software such as Axial Control, Homeseer, Indigo for MacOS. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.
Product Support
Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.
Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices.
Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wireless firmware upgrades. Compatible with Z-Wave enabled home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2.
No software included.
Manuals:? Aeotec Z-Stick Gen5p product manual
Technical Specification
RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave controller
Power
USB DC 4.75V to 5.25V
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
20g
Housing
ABS
Dimensions
(LxWxH) 1.1 x 0.4 x 3.5 inches
Compliance
Z-Wave Plus certified
Warranty
12 Months
Product Description
Control on tap.
Control one Z-Wave device. Control many. And all with a single tap.
There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of your?AEOTEC WallMote?s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.
Control a light. Control a room. Control a home.
Because the?AEOTEC WallMote?communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top.
Wireless switch.
To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres.
Secure switch.
Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.
Subtle switch.
Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep
Simple recharging.
Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable.
Haptic feedback.
It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote?s touch glass. But you will feel the change. WallMote?s haptic engine confirms your every action via a click sensation.
Gen5 built in.
WallMote and WallMote Quad are part of Aeotec?s Gen5 range of Z-Wave devices. Built upon the latest version of Z-Wave- Z-Wave Plus ? cutting-edge performance and security is crafted into Z-Wave?s most advanced battery-powered wall switch.
Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them.
All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.
PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS:
Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using Zellweger equipment?or similar onto their distribution networks in order to remotely control devices such as off-peak hot water systems and street lighting, although other areas within Australia also use this technology. Not all properties are affected by ripple control, so just because you might live in one of these areas, does not mean that you will have these problems.
Ripple injection control systems work by superimposing coded control signals, commonly 750Hz or 1050Hz on the 50 Hz mains supply.
Some electrical appliances such as fans, dimmers, toasters and LED lighting can be sensitive to this ripple control signal. The results could be audible buzzing noises from fans or flickering lights whenever the ripple control signals are present.
Electricity suppliers are advising users to install appropriate?ripple signal filters in such areas.
The ripple signal filter is a tuned passive inline filter that completely eliminates the superimposed ripple injection control signal from the normal mains supply to produce a noise-free filtered mains supply which can then be connected to the electrical appliances or light control systems. The ripple signal filter is specifically tuned to eliminate the ripple control signal frequency of 750Hz or 1050Hz.
However, we can?t guarantee the ripple signal filter always will help you if you experiencing such issues. Please contact your local energy provider to get more information and proposed solutions for your electrical installation.
If you are getting similar problems with your dimmers and fans and it?s not Ripple Control Signal and you are hearing the tones at random times of the day, your electrical supply may be affected by harmonics; a power fluctuation that is not part of the normal electricity supply or ripple control signal output.
Harmonics are caused by interference created by other equipment on the network, such as inverter type air conditioners and switch-mode power supplies for computers.
The offending appliances may be in your home or other premises on the local power grid. If you are being affected by network harmonics, it may be of benefit to transfer the electricity supply to your premises to a different phase in the street. This is something you will need to discuss with your electrical company.
We are strongly recommending for the areas we have mentioned above to run tests with only a few dimmers before committing for high volumes. If results are not fully OK you may use relays only instead of dimmers.Please note that our warranty for the faulty devices is not covering above-mentioned conditions with your local electric grids.
Please see affected with Ripple Signalling areas here:
QUEENSLAND
Only Southern Queensland (Energex) has Ripple Signalling.
The Frequency is 1050Hz.
The rest of Queensland (Ergon) does not have Ripple Signalling.
Motion sensor.
Motion sensor. Motion for security. Motion for presence. Motion for management. The?AEOTEC MultiSensor 6?is perfect for more than just an intelligent security system. With a 5 metre range and a 120? field of view, the?AEOTEC MultiSensor 6?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data ? the?AEOTEC MultiSensor 6?makes your home automation system more powerful and more intelligent.
Temperature sensor.
From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The?AEOTEC MultiSensor 6?provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50?C (14 to 122?F) and reporting temperature changes back to a smart home gateway.
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC MultiSensor 6?s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC MultiSensor 6?is the smarts behind smart lighting.
Humidity sensor.
Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. The?AEOTEC MultiSensor 6 offers incremental monitoring of humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. The?AEOTEC MultiSensor 6?monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.
Vibration sensor.
It measures the environment it?s in, and it also measures itself. The AEOTEC MultiSensor 6?contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the?AEOTEC MultiSensor 6?? it?ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They?ll also be able to detect seismic activity within your home.
UV sensor.
Perfectly managing an environment means understanding it perfectly. The?AEOTEC MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured in line with the World Health Organisation?s UV Index, the?AEOTEC MultiSensor 6?measures a room?s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.
Product Support
The perfect sensor comes with the perfect accessories. The?AEOTEC MultiSensor 6?has four different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.?(sold separately)
Install the?AEOTEC MultiSensor 6?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC MultiSensor 6?up to 360? and refine its field of view by up to 50?.
USB cable.
After 2 years you won?t have to change batteries if you power your?AEOTEC MultiSensor 6?via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6 can be easily installed with just the provided double-sided tape from 3M.
Manuals:? Aeotec Multisensor 6 product manual
Technical Specifications
RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
USB DC 4.75V to 5.25V
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
74g
Housing
ABS
Dimensions
(LxWxH) 28mm x 28mm x 42mm
Compliance
Z-Wave Plus certified
Warranty
12 Months
Product Description
Power optimised.
Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6?s battery acts as an emergency backup.
Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don?t even have to use them. But if you do, Water Sensor 6?s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock.
Wireless optimised.
Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna.
Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges.
Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to.
In the box.
3M double side adhesive tape.
Desktop style of adapter without pins.
Dock for Water Sensor
6. Mounting screws.
Spot sensing rope x 2. USB cable for optional power supply.
Compact without compromise, at just 60 x 60 mm the?Aeotec Smart Switch 6 is over 84% smaller than the first edition. And even though it?s 43% smaller than the recently released Smart Switch Gen5, it still benefits from its industry-leading technology.
Smart plug.
Convenient plug. There?s smart. There?s convenient. The?Aeotec Smart Switch 6?is both.
Uncrowded.
Uncomplicated. Plugs that block multiple power outlets aren?t just inconvenient, they?re annoying. The?Aeotec Smart Switch 6?has been designed to reduce the possibility of that happening. At only 60 mm / 2.3 inches in size, the?Aeotec Smart Switch 6 can be used without blocking the outlet it's installed next to.
Safe switch.
The home isn?t just where the heart is, it?s where your family should be safest. In the regions where electrical standards allow, the?Aeotec Smart Switch 6?prevents objects from being inserted into it via its inbuilt socket protection.
Protective switch.
Your loved ones are protected and so are your valuables. The?Aeotec Smart Switch 6?features inbuilt surge and overcurrent protection helping to prevent your electronics from ever being damaged.
Powerful switch.
The?Aeotec Smart Switch 6?can power devices that draw up to 15 amps of power. But safety comes first, so a different?Aeotec Smart Switch 6?has been engineered for every country it?s available in, ensuring that it?s never overpowered and never unsafe.
Perfect distance.
Wireless doesn?t mean weak. The?Aeotec Smart Switch 6?can communicate with other Z-Wave devices at distances up to 100 metres / 300 feet.
Updated switch.
Your smart switch will keep getting smarter thanks to Aeotec?s over-the-air firmware updates. Whenever new firmware is released, you?ll be able to update your?Aeotec Smart Switch 6?wirelessly.
Plug and play.
Anyone can install the?Aeotec Smart Switch 6. Plug it into a wall outlet and press the action button on the front. Everything else is handled by your Z-Wave hub.