The Global Cach? Flex Link Serial Cable (RS485) connects to your iTach Flex Module via the 3.5mm jack to enable IP/WiFi control for RS485 serial components. The RS485 setting includes Baud Rate, Duplex, Parity, Data Bits, and Stop Bits. The RS485 serial cable is both 4-wire (full-duplex) and 2-wire (half-duplex) capable. Duplex is unique to RS485 serial cables. It should be set to Full for 4-signal RS485 and Half for 2-signal RS485.
The Global Cach? family of connectivity products provides choices for the industry professional and the consumer, significantly reducing costs and providing a scalable platform for today and the future. Global Cach?’s belief in open systems and the evolution of the automation market is being played out today, since cost-effective PC-based and phone-based control applications are now becoming widely available. iTach devices, Network Adapters, and other Global Cach? connectivity products have radically changed the automation dynamic. These products are engineered to integrate easily into any control environment, even high-end proprietary systems, providing a path to open systems and better competitive leverage.
Flex Link Serial cables allow serial devices to be controlled with the Flex family of products. With the Flex Link, RS485 Serial Cable, the Flex Link RS232 Serial cable, and the Flex Link RS232 Mini Jack cable, RS232 and RS485 serial devices can be simply connected to the network for seamless control. The Flex Link RS232 Serial cable and the Flex Link RS232 Mini Jack cable provide connections to devices with different physical RS232 connectors. The Flex Link RS232 Serial cable features a standard DB9 connector that allows for swapping pins in setup. The Flex Link RS232 Mini Jack cable utilizes a 3.5 mm mini-jack, allowing for direct connections to 3.5 mm mini-jack RS232 ports and serial inputs on many common TVs and other AV devices.
The?iTach Flex enables you to easily control any Infra-Red (IR) appliance via your home’s LAN network. Appliances such as TVs, DVD/Blu-Ray, Amplifiers can all be controlled from your Z-Wave network controller (via local LAN),? and then control it from your Z-Wave controllers such as Fibaro HC3?or?VERA.
The iTach Flex includes the unique ‘Global Port’, enabling you to choose which types of device the iTach Flex controls by selecting any of the Flex Link Cables:
Flex Link IR Blaster?- Blasts IR signals to all devices in 10m range
Flex Link IR Emitter?- single IR emitter
Flex Link Tri-Port IR Cable?- enables up to 3 IR emitters to be connected to on iTach Flex
Note?- the Flex Link cables are not included with the iTach Flex, you need to choose at least one Flex Link Cable when you order the iTach Flex.
FIBARO HC2 INTEGRATION
To enable the Fibaro Home Center to use the iTach devices, we need to create a Virtual Device. This Virtual Device sends the correct IR commands to the iTach to control the particular appliance and can be used from a browser, smartphone or tablet.
This guide below shows you how to:
Create a Virtual Device in Fibaro Home Center
Use IR Commands that the iTach has ‘learnt’ for a specific appliance
Use the Virtual Device to control the appliance using IR commands via the iTach IR adapter
Make sure you have configured your iTach adapter and have used it to ‘learn’ the IR codes of the appliance you wish to control.
The Global Cach? Flex Link Serial Cable (RS485) connects to your iTach Flex Module via the 3.5mm jack to enable IP/WiFi control for RS485 serial components. The RS485 setting includes Baud Rate, Duplex, Parity, Data Bits, and Stop Bits. The RS485 serial cable is both 4-wire (full-duplex) and 2-wire (half-duplex) capable. Duplex is unique to RS485 serial cables. It should be set to Full for 4-signal RS485 and Half for 2-signal RS485.
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colours (white, black, red, blue, yellow)
FIBARO Swipe is a wireless, battery powered gesture-controlled pad that allows you to activate Z-Wave scenes or commands with a simple wave of the hand.
FIBARO Swipe has the appearance of a small tablet but instead of a touchscreen, it uses sophisticated motion identification technology to respond to six distinct hand gestures including four directional swipes (up, down, left, right), and two circular motions (left, right). A single gesture or a combination of gestures may be used ? for example, swipe ?down? to turn off the lights, ?up? to open your blinds. With four short swipes, the living room is transformed into a home theater! Swipe?s only limit is your imagination.
Z-Wave Plus certified contactless gesture control
May be used with wet or dirty hands ? e.g. turn on the lights in the kitchen or bathroom without getting the switches or wall dirty
Endless control possibilities ? e.g. wave goodbye to activate your ?going out? scene, swipe up to raise the volume on your sound system, swipe down to close difficult to reach skylight windows, reach out your hand from bed in the morning to activate your coffee machine
Endless placement possibilities ? e.g. visible on the dresser or a wall with your favourite family photos, or hidden away under the kitchen counter or coffee table
Powered by 4xAA batteries or Micro-USB giving you ultimate flexibility
Available in black or white
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colours (white, black, red, blue, yellow)
The DHS Z-Wave Advanced Remote (manufactured by Remotec) is capable of creating and controlling a Z-Wave network as well as acting as a secondary controller to an IP Gateway (like Vera 3/Lite).
Control devices individually or in groups using preset scenes(up to 12 scenes)
1-year battery life
Compatible with most Z-Wave enabled devices
Supports multi-channel devices
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication.
You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller.
It can also control devices by opening/closing output contacts independently of the inputs.
Content
Simply Connect With Global Cache
The Global Cach? family of connectivity products provides choices for the industry professional and the consumer, significantly reducing costs and providing a scalable platform for today and the future. Global Cach?'s belief in open systems and the evolution of the automation market is being played out today, since cost-effective PC-based and phone-based control applications are now becoming widely available. iTach devices, Network Adapters, and other Global Cach? connectivity products have radically changed the automation dynamic. These products are engineered to integrate easily into any control environment, even high-end proprietary systems, providing a path to open systems and better competitive leverage.
Flex Link Serial cables allow serial devices to be controlled with the Flex family of products. With the Flex Link, RS485 Serial Cable, the Flex Link RS232 Serial cable, and the Flex Link RS232 Mini Jack cable, RS232 and RS485 serial devices can be simply connected to the network for seamless control. The Flex Link RS232 Serial cable and the Flex Link RS232 Mini Jack cable provide connections to devices with different physical RS232 connectors. The Flex Link RS232 Serial cable features a standard DB9 connector that allows for swapping pins in setup. The Flex Link RS232 Mini Jack cable utilizes a 3.5 mm mini-jack, allowing for direct connections to 3.5 mm mini-jack RS232 ports and serial inputs on many common TVs and other AV devices.
The?iTach Flex enables you to easily control any Infra-Red (IR) appliance via your home's LAN network. Appliances such as TVs, DVD/Blu-Ray, Amplifiers can all be controlled from your Z-Wave network controller (via local LAN),? and then control it from your Z-Wave controllers such as Fibaro HC3?or?VERA.
The iTach Flex includes the unique 'Global Port', enabling you to choose which types of device the iTach Flex controls by selecting any of the Flex Link Cables:
Flex Link IR Blaster?- Blasts IR signals to all devices in 10m range
Flex Link IR Emitter?- single IR emitter
Flex Link Tri-Port IR Cable?- enables up to 3 IR emitters to be connected to on iTach Flex
Note?- the Flex Link cables are not included with the iTach Flex, you need to choose at least one Flex Link Cable when you order the iTach Flex.
FIBARO HC2 INTEGRATION
To enable the Fibaro Home Center to use the iTach devices, we need to create a Virtual Device. This Virtual Device sends the correct IR commands to the iTach to control the particular appliance and can be used from a browser, smartphone or tablet.
This guide below shows you how to:
Create a Virtual Device in Fibaro Home Center
Use IR Commands that the iTach has 'learnt' for a specific appliance
Use the Virtual Device to control the appliance using IR commands via the iTach IR adapter
Make sure you have configured your iTach adapter and have used it to 'learn' the IR codes of the appliance you wish to control.
Full information is in this?document.
Interface:?Serial RS485; 4-wire (full duplex) and 2-wire (half duplex) capable
Connector:?5 pin screw terminal block
Speed:?300 baud to 115.2 Kbaud
Cable/Connector:?5 feet, 3.5 mm plug connects to Flex Link Port
Warranty:?2 Years
Product Details
The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.
Technical Specifications
RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Power
ER14250 ? AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Storage temperature
?10 ~ 50 ?C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
Product Details
The FIBARO Swipe is equipped with the most precise 3D motion detecting sensor of its kind, which ensures flawless recognition of the performed gestures. It presents a new and innovative way of controlling home automation devices in an intuitive and user friendly way.
The magic of Swipe means you can position it in less conventional places as it will work through solid surfaces, like under a desk or behind a wall. And when displayed, Swipe can be used as a beautifully designed picture frame allowing you to easily change photos whenever you want through a simple to remove front panel. A special gesture controlled menu also allows you to add/remove or reset the device without dismantling it.
With the endless possibilities of a gesture, Swipe is a perfect solution for the elderly and disabled, or people who find technology difficult to learn. Show them how to turn on the heating or ventilate the room without even getting up from the chair.
Swipe needn?t be limited to the home either. Use it in the workplace to help you make the office as comfortable as the home. Control blinds, lights or a projector ? all with a wave of your hand.
FIBARO Swipe features the latest Z-Wave 500 series chip for improved wireless range, security and data transfer rates. Please note: Currently integrates with Australian Z-Wave certified (921.42MHz) Fibaro Home Center 2/Lite controllers only.
Installation
Place the Swipe onto its holder.
Place the Swipe within the direct range of your Z-Wave controller.
Plug the power source into the micro-USB port if required.
Set the main controller in (security/non-security) add mode (see the controller?s manual).
Move and hold your hand close to the center of the pad.
If the device is battery powered, high pitched beep will signal exiting the Standby Mode.
Loud sound sequence will confirm entering the menu, keep holding your hand.
After hearing two short beeps (green indicator colour), withdraw the hand and perform swiping up gesture to confirm selection (two beeps will confirm validity).
Wait for the adding process to end.
Successful adding will be confirmed by the Z-Wave controller?s message and 3 short beeps (green visual indicator colour).
The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.
Technical Specifications
RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Power
ER14250 ? AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Storage temperature
?10 ~ 50 ?C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
The?DHS?Z-Wave Advanced Remote?is a smart Z-Wave controller designed to operate as either a primary controller, capable of creating and managing its own Z-Wave network, or a secondary controller to an IP Gateway (like Vera 3/Lite).
The?DHS Z-Wave Advanced Remote?works with almost all Z-Wave enabled devices including; binary switches, dimmers, thermostats, door locks, binary or multi-level sensors. Users can control their Z-Wave enabled devices individually or through ?Scene? control. A scene is a collection of Z-Wave devices configured to user-preferred settings, levels, modes or operating conditions which can all be activated with a single command.
The?DHS Z-Wave Advanced Remote is also equipped with a backlit LCD screen and an intelligent Self Navigated Button (SNB) system. Users can set up and operate their Z-Wave devices using this remote, and enjoy a networked, wireless home automation system anywhere at home.
Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
Works as a Z-Wave signal repeater.
Allows for connecting sensors:
6 DS18B20 sensors,
1 DHT sensor,
2 2-wire analog sensor,
2 3-wire analog sensor,
2 binary sensors.
Built-in temperature sensor.
This product works with :
Fibaro Home Controller 3/2/Lite
Please note:
THE DEVICE IS NOT COMPATIBLE WITH VERA HOME CONTROLLERSBefore installation
Connect only in accordance with one of the diagrams,
The device is powered with secure voltage; nevertheless, the user should be extra careful or should commission the installation to a qualified person,
Do not connect devices that are not compliant with the specification,
Do not connect other sensors than DS18B20 or DHT22 to SP and SD terminals,
Do not connect sensors to SP and SD terminals with wires longer than 3 meters,
Do not load the device outputs with a current exceeding 150mA,
Every connected device should be compliant with the relevant safety standards,
Unused lines should be left insulated.
Tips for arranging the antenna:
Locate the antenna as far from metal elements as possible (connecting wires, bracket rings, etc.) in order to prevent interferences,
Metal surfaces in the direct vicinity of the antenna (e.g. flush mounted metal boxes, metal door frames) may impair signal reception!
Do not cut or shorten the antenna ? its length is perfectly matched to the band in which the system operates.
Make sure no part of the antenna sticks out of the wall switch box.