Yubii, a real all-in-one ecosystem for your smart home Works with over 3000 products from other brands.
Yubii Home is open to the integration of third-party devices thanks to the Z-Wave and WiFi protocols, and it can support one IP camera and up to 5 plug-ins.
Manage your home as you want through Yubii app you can keep your home under control and manage it anywhere you are.
Imagine endless scenarios An intelligent home is primarily about increasing comfort and making everyday activities easier. Automated scenarios, voice control, remote control from smartphones, tablets, and smart watches, will facilitate your daily routine.
Yubii Home, your life gets better The whole house in one device: possibility to control lights, roller shutters, gates, doors and windows, electrical appliances, heating and watering systems, multimedia, as well as to detect water leaks, CO gases and fire with a simple command from one single app.
Sustainability and Savings Yubii Home will make sure your smart home has a minimal impact on the environment, reducing its carbon footprint. Thanks to intelligent heating and lighting control, and electrical loads monitoring, you can lower your energy consumption and reduce your heating bills.
Imagine endless scenarios An intelligent home is primarily about increasing comfort and making everyday activities easier. Automated scenarios, voice control, remote control from smartphones, tablets, and smart watches, will facilitate your daily routine.
Yubii, a real all-in-one ecosystem for your smart home Works with over 3000 products from other brands.
Yubii Home is open to the integration of third-party devices thanks to the Z-Wave and WiFi protocols, and it can support one IP camera and up to 5 plug-ins.
Manage your home as you want through Yubii app you can keep your home under control and manage it anywhere you are.
Imagine endless scenarios An intelligent home is primarily about increasing comfort and making everyday activities easier. Automated scenarios, voice control, remote control from smartphones, tablets, and smart watches, will facilitate your daily routine.
The?FAKRO Z-Wave? ZWMP Weather Module?is the primary component for monitoring outside weather conditions, along with offering compatibility with a variety of Z-Wave? home automation gateways. When installed in conjunction with the FAKRO ZRD Rain Sensor and FAKRO ZWD Wind Sensor, they can automatically close windows upon detecting wind or rainfall.
Easy to install and include into your existing Z-Wave? network setup
Compatible with the FAKRO ZRD Rain Sensor, FAKRO ZWD Wind Sensor, Thermostat and other external devices
Automatically sends closure requests to electronic shutters, windows and skylights upon detecting rain or wind
Can work as a Primary or Secondary controller
Easily programmable to communicate with compatible Z-Wave gateways
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).
A flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening an NC contact.
The device has built in temperature sensor, monitoring the temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by a connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signals in case of substantial inundation of water.
The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW.
Control the ON-OFF function of a circuit remotely or using a wall switch
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
control loads up to 2kW (8A)
The main differences in the FGS-213 are:
Z-Wave Plus certification
Has power monitoring
230V powered only (this is the same as the FGS-212)
No dry contacts - this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
The?QUBINO Double Switch (by GOAP) is a Z-Wave module for switching on/off one or two electrical devices (e.g. light, fan, etc ...). The module can be controlled either through the Z-wave network or through the wall switch manually.
This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.
Supported switches
The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.
FIBARO Swipe is a wireless, battery powered gesture-controlled pad that allows you to activate Z-Wave scenes or commands with a simple wave of the hand.
FIBARO Swipe has the appearance of a small tablet but instead of a touchscreen, it uses sophisticated motion identification technology to respond to six distinct hand gestures including four directional swipes (up, down, left, right), and two circular motions (left, right). A single gesture or a combination of gestures may be used ? for example, swipe ?down? to turn off the lights, ?up? to open your blinds. With four short swipes, the living room is transformed into a home theater! Swipe?s only limit is your imagination.
Z-Wave Plus certified contactless gesture control
May be used with wet or dirty hands ? e.g. turn on the lights in the kitchen or bathroom without getting the switches or wall dirty
Endless control possibilities ? e.g. wave goodbye to activate your ?going out? scene, swipe up to raise the volume on your sound system, swipe down to close difficult to reach skylight windows, reach out your hand from bed in the morning to activate your coffee machine
Endless placement possibilities ? e.g. visible on the dresser or a wall with your favourite family photos, or hidden away under the kitchen counter or coffee table
Powered by 4xAA batteries or Micro-USB giving you ultimate flexibility
Available in black or white
Content
Yubii Home, your life gets better The whole house in one device: possibility to control lights, roller shutters, gates, doors and windows, electrical appliances, heating and watering systems, multimedia, as well as to detect water leaks, CO gases and fire with a simple command from one single app.
Sustainability and Savings Yubii Home will make sure your smart home has a minimal impact on the environment, reducing its carbon footprint. Thanks to intelligent heating and lighting control, and electrical loads monitoring, you can lower your energy consumption and reduce your heating bills.
Imagine endless scenarios An intelligent home is primarily about increasing comfort and making everyday activities easier. Automated scenarios, voice control, remote control from smartphones, tablets, and smart watches, will facilitate your daily routine.
Documentation
Technical Specifications
Product Description
Providing a central unit for monitoring changing weather conditions, the?FAKRO Z-Wave ZWMP Weather Module?takes full advantage of the Z-Wave? system to allow for seamless inclusion into the home environment.
Including the ZWMP Weather Module into the Z-Wave system is simply using your Z-Wave Controller, in order for the device to be recognized. From there, each individual shutter/window or skylight installation can be programmed to interact with the ZWMP Weather Module, which will allow it to respond to changing weather conditions. The ZWMP Weather Module contains three digital inputs, which allows various external devices to be plugged in (ie. Rain and wind sensors, time switch, thermostat etc). With a working range of up to 40 meters, the ZWMP Weather Module can seamlessly interact with other Z-Wave devices around the household.
This product is compatible with:
? Compatible with any Z-Wave network controller,
? May be connected to any alarm system (potential-free output terminal),
? Extremely easy installation - simply put on a surface prone to flooding,
? May be installed anywhere - flood sensor?s contacts extended with a wire,
? Battery or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source,
? Theft protection - tilt is reported to the Z-Wave network or alarm system?s main controller,
? Two operating modes - flood/temperature sensor or just a temperature sensor.
Product Details
The Fibaro Z-Wave Single Switch 2 is a smart Z-Wave module capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This Fibaro Z-Wave Single Switch 2 requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The Fibaro Z-Wave Single Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
Raspberry PI with RaZberry Card
Fibaro Home Controller 2/Lite
DHS Z-Wave Universal Remote Controller
DHS Z-Wave Mini Remote Controller
Configuring Z-Wave Devices
Z-Wave devices often have several configurable parameters which you can change using your Vera?s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device?s user manual. In most cases, your device?s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Please check the maximum load before installing or operating.This installation must be done by a certified electrician in Australia and New Zealand.Before engaging an electrician, check that they provide an electrical compliance certificate.For a warranty claim, you have to provide an installation compliance certificate from your electrician.
? Power monitoring accuracy P=5-50W, +/-3W; P?50W, +/-3%;
? Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125?C
??Support for the connection of digital temperature sensor (optional part)
? 2 binary inputs offer the option to connect additional devices such as sensors, switches/pushbuttons, etc, ?
Strengthens Z-Wave Connectivity
The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you with the flexibility to extend the range of your Z-Wave network.
The QUBINO double switch is?Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information.
Note!
Do not connect the module to loads exceeding recommended values. Connect the module only in accordance with the manual and diagrams below. Use only qualified electricians!
The FIBARO Swipe is equipped with the most precise 3D motion detecting sensor of its kind, which ensures flawless recognition of the performed gestures. It presents a new and innovative way of controlling home automation devices in an intuitive and user friendly way.
The magic of Swipe means you can position it in less conventional places as it will work through solid surfaces, like under a desk or behind a wall. And when displayed, Swipe can be used as a beautifully designed picture frame allowing you to easily change photos whenever you want through a simple to remove front panel. A special gesture controlled menu also allows you to add/remove or reset the device without dismantling it.
With the endless possibilities of a gesture, Swipe is a perfect solution for the elderly and disabled, or people who find technology difficult to learn. Show them how to turn on the heating or ventilate the room without even getting up from the chair.
Swipe needn?t be limited to the home either. Use it in the workplace to help you make the office as comfortable as the home. Control blinds, lights or a projector ? all with a wave of your hand.
FIBARO Swipe features the latest Z-Wave 500 series chip for improved wireless range, security and data transfer rates. Please note: Currently integrates with Australian Z-Wave certified (921.42MHz) Fibaro Home Center 2/Lite controllers only.
Installation
Place the Swipe onto its holder.
Place the Swipe within the direct range of your Z-Wave controller.
Plug the power source into the micro-USB port if required.
Set the main controller in (security/non-security) add mode (see the controller?s manual).
Move and hold your hand close to the center of the pad.
If the device is battery powered, high pitched beep will signal exiting the Standby Mode.
Loud sound sequence will confirm entering the menu, keep holding your hand.
After hearing two short beeps (green indicator colour), withdraw the hand and perform swiping up gesture to confirm selection (two beeps will confirm validity).
Wait for the adding process to end.
Successful adding will be confirmed by the Z-Wave controller?s message and 3 short beeps (green visual indicator colour).