FIBARO Z-Wave Button (Yellow)

 

$79.99

Availability: In Stock

The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.

  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)

2 in stock

SKU: DHS-CON-SBUT-FIB-YL Categories: , Tags: ,

Description

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.

The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.

FIBARO

Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)

Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.

FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz – AU/NZ  approved RF for Z-wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS

Quick Comparison

SettingsFIBARO Z-Wave Button (Yellow) removeFIBARO Z-Wave RGBW Controller 2 removeFIBARO Home Center 3 Lite removeFIBARO Z-Wave Roller Shutter 3 removeFAKRO Z-Wave Weather Module removeFIBARO Z-Wave Double Switch 2 remove
Image
SKUDHS-CON-SBUT-FIB-YLDHS-LIT-RGBW-FIBDHS-CON-HC3LITE-FIBDHS-WIN-BLD-FIB-3DHS-WIN-WM-FKRDHS-LIT-SWW-FIB-022
Rating
Price$79.99$89.99$219.99$98.99$197.99$89.99
Stock

2 in stock

19 in stock

20 in stock

20 in stock

1 in stock

20 in stock

Availability2 in stock19 in stock20 in stock20 in stock1 in stock20 in stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionThe FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)
The FIBARO Z-Wave RGBW Controller 2 is a wireless controller which enables you to manage your LED strips and halogen lights.
  • Wirelessly control LEDs with an unlimited range of colour options
  • Monitors energy usage
  • Four analogue sensor inputs
  • Four dimmer channels
  • Acts as a repeater expanding your Z-Wave network
This new Fibaro home controller offers impressive hardware and integration options for installers and clients. This excellent Smart Home controller offers next generation hardware, including: COMMUNICATION TECHNOLOGY: Z-WAVE (700 series) NETWORK TECHNOLOGY: Wi-Fi 2.4GHz CPU: Single-Core ARM Cortex A7 900 MHz RAM MEMORY: 512 MB FLASH MEMORY: 4 GB eMMC The Fibaro Home Center 3 Lite is the perfect controller for small Home Automation projects, offering an excellent solution for smaller homes or apartments. The system is recommended for Smart Homes with up to 40 Z-Wave devices and 20 scenes. But, don't be mistaken by its size, the Fibaro HC3 Lite offers an affordable solution without having to compromise on quality. With this new system, you'll be able to automate a variety of solutions, including: Fibaro HC3 Lite SolutionsThe Fibaro Roller Shutter Controller is designed to control blind, awning, garage door and gate motors.
  • Supports five different types of motor systems
  • Precise positioning of blind or awning
  • Automatic calibration
  • Wireless control of AC motors with "three wires" interface
  • Monitor and analyse energy usage
FIBARO Roller Shutter 3 (FGR-223) is a new Z-Wave Plus version of its predecessor model Fibaro Roller Shutter 2.
The FAKRO Z-Wave™ ZWMP Weather Module is the primary component for monitoring outside weather conditions, along with offering compatibility with a variety of Z-Wave™ home automation gateways. When installed in conjunction with the FAKRO ZRD Rain Sensor and FAKRO ZWD Wind Sensor, they can automatically close windows upon detecting wind or rainfall.
  • Easy to install and include into your existing Z-Wave™ network setup
  • Compatible with the FAKRO ZRD Rain Sensor, FAKRO ZWD Wind Sensor, Thermostat and other external devices
  • Automatically sends closure requests to electronic shutters, windows and skylights upon detecting rain or wind
  • Can work as a Primary or Secondary controller
  • Easily programmable to communicate with compatible Z-Wave gateways
The new Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave wireless module which can control two circuits each with a maximum load of 6.5A per channel and 10A total load per circuit.
  • Control the ON-OFF function of two two independent circuits or appliances remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling
  • Latest generation Z-Wave 500 series chip
  • Z-Wave Plus certification
  • Very accurate energy measurement +/- 1 % for power above 5W
  • Supports secure mode (Z-Wave Network Security) encrypted with AES-128
  • No dry contacts - this is important. It means that the new FGS-223 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
Content

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
The FIBARO Z-Wave RGBW Controller 2 is a one of a kind, advanced wireless 4-colour LED strip controller. Apart from the traditional RGB channels it also supports the white light channel which allows you to add pastel colours to your lighting decorations. The FIBARO Z-Wave RGBW Controller 2 also has four analogue inputs supporting any type of Fibaro sensor (e.g. light sensors, wind sensors, pressure sensors and potentiometers operating between 0-10V). This smart feature allows you to use your lighting as a warning for certain events. You could, for example, set your RGB garden lights to turn red and flicker when one of your security sensors is triggered, alerting your neighbours to the intruder and allowing them to notify the proper authorities. This device has four output channels which means that you can connect and independently control up to four light sources. The FIBARO Z-Wave RGBW Controller 2 also allows you to monitor the energy consumed by the LED strips. Each of the four channels can be monitored independently providing you with all the information you need to minimise your energy bills. The FIBARO Z-Wave RGBW Controller 2 can control:
  • 12 / 24V DC powered RGB strips
  • 12 / 24V DC powered RGBW strips
  • 12 / 24V DC powered LED strips, bulbs, etc
  • 12 / 24V DC powered halogen lights
  • 12 / 24V DC powered low output power fans
Note: Power supply is not included. This product integrates with all Australian certified (921.42 MHz) Z-Wave controllers including:
  • Fibaro Home Center 3/Lite
  • Fibaro Yubii Home

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller. Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section. Please check the maximum load before installing or operating. This device must be installed by a certified electrician. For all warranty claims, an electrical compliance certificate from your electrician must be provided.

Technical Specifications

RF Protocol Z‐Wave
RF Frequency 921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐Wave device type Z-Wave dimmer
Power 12V and 24V
Operation Range Up to 50m outdoors, up to 30m indoors (depending on terrain and building structure)
Application Controlled automatically by pre-set Fibaro devices or manually using any Z-Wave controller
Operation temperature 0 ~ 55 °C
Storage temperature ‐10 ~ 80 °C
Weight 50g
Housing ABS
Compliance EN 55015, EN 60669-2-1
Regulatory Compliance Mark N5496

Documentation

FIBARO Z-Wave RGBW Controller User Manual
Security: The FIBARO System will ensure the safety of you and your loved ones.
  • Smoke detection
  • Carbon monoxide detection
  • Flood detection
  • Operation as a wireless alarm system
  • Cooperation with the existing wired alarm system (eg SATEL) and security companies
  • Emergency door opening
  • Closing the roller shutters when you are away
Health: The FIBARO System will help you ensure the right conditions for your health.
  • Humidity control
  • Smart heating
  • Measurement of air quality and quality of PM2.5 and PM10 dust
  • Detection of hazardous gases
  • Control of ventilation and recuperation
  • Notifications in case of dangerous situations
Convenience: An intelligent home is primarily about increasing comfort and facilitating everyday activities.
  • Voice control
  • Remote home control from applications for phones, tablets and smart watches
  • Automatic scenarios - grouping devices, schedules and scenes
  • Control over devices with one button or remote control
  • Combining all elements of the house into one ecosystem
Sustainability: FIBARO will ensure that your home has a minimal impact on the surroundings and the environment.
  • Intelligent heating control leading to a reduction in the demand for heating media
  • Build awareness through the energy panel and measure current electricity consumption
  • The use of dimmers, thermostats or intelligent heads leads to significant energy savings
Savings: In the FIBARO system, your savings are very important.
  • The heating system is intelligently controlled through schedules and the presence of the household members
  • The use of dimmers and LED drivers leads to a reduction in bills
  • The ability to use scenarios and automation ensures that no devices will be redundantly used
Fibaro EcoSystem

Documentation

Fibaro Home Center 3 Lite User Manual  

Technical Specifications

Application Smaller houses (recommended up to 100 m2) and apartments
Number of Supported Devices Recommended up to 40 Z-Wave devices
Communication Technologies Z-Wave 700
Network Technologies Wi-Fi 2.4GHz
CPU Single-Core ARM Cortex A7 900 MHz
RAM 512MB
Flash Memory 4 GB eMMC
Possibilities of Automation LUA, block scenes, panels, schedules
Maximum number of scenes Recommended up to 20 scenes
IP Cameras Support 1 IP camera
Plugins and Quick Apps Support 5 plugins and 10 quick apps
Migration Mechanism No
Operating in Connected Gateways Mode Only SLAVE mode

Product Details

The Fibaro Roller Shutter 3 (FGR-223) is an advanced Z-Wave controller for automated roller blinds, awnings, venetian blinds, garage doors and gates. The module can control devices that are powered by an AC electric motor with a "three wire" interface. The Roller Shutter module features automatic calibration so that you can precisely position the blind. It also includes a power metering feature to help you measure power consumption. The Fibaro Roller Shutter 2 has five modes that enable it to perfectly control any electric garage door, gate, roller blind, awning or Venetian blind. This allows for the correct configuration and operation of a device through a special interface icon (via the Fibaro HC2).
  • Roller blinds with positioning
  • Roller blinds without positioning
  • Garage doors with positioning
  • Garage doors without positioning
  • Venetian blind

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller. Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section. This product must be installed by a qualified electrician. Before engaging an electrician, check that they provide a warranty and electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.

Technical Specifications

RF Protocol Z‐Wave Plus
RF Frequency 921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Z‐wave device type Z-Wave multiple level dimmer, routing slave
Power 110 - 230 V ±10% 50/60Hz
Operation Range Up to 20m indoor when no obstacles
Application Indoor use only
Operation temperature 0 ~ 55 °C
Motor Load max  up to 1kW
Storage temperature ‐10 ~ 80 °C
Weight 50g
Housing ABS
Compliance C-Tick, EU standards EN 55022, EN 61000
 

Documentation

Fibaro Z-Wave Roller Shutter 3

Product Description

Providing a central unit for monitoring changing weather conditions, the FAKRO Z-Wave ZWMP Weather Module takes full advantage of the Z-Wave™ system to allow for seamless inclusion into the home environment. Including the ZWMP Weather Module into the Z-Wave system is simply using your Z-Wave Controller, in order for the device to be recognized. From there, each individual shutter/window or skylight installation can be programmed to interact with the ZWMP Weather Module, which will allow it to respond to changing weather conditions. The ZWMP Weather Module contains three digital inputs, which allows various external devices to be plugged in (ie. Rain and wind sensors, time switch, thermostat etc). With a working range of up to 40 meters, the ZWMP Weather Module can seamlessly interact with other Z-Wave devices around the household. This product is compatible with:

Technical Specifications

RF Protocol
Z-Wave™
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave Controller
Status Indicator
LED Lights
Operation Range
Up to 40m without obstacles
Power
 230VAC
Operation temperature
+5 ~ 45 °C
Dimensions L x W x H
 120mm x 80mm x 50mm
Weight
575g
Housing
ABS

Product Details

The Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene. The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician. This Fibaro Fibaro Z-Wave Double Switch 2 requires 3-wire (including neutral) installation and works with an AC (230V) power supply. The Fibaro Z-Wave Double Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits. This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers - Fibaro Home Center 2/Lite Note: It doesn't integrate with Vera gateways at this stage.

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using Fibaro’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active or the type of manual switch connected to a Z-Wave light controller. Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. Please check the maximum load before installing or operating. This installation must be done by a certified electrician in Australia and New Zealand. Before engaging an electrician, check that they provide an electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.

Documentation

Fibaro Z-Wave Double Switch 2 Manual

Technical Specification

RF Protocol
Z-Wave
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave Switch, Routing Slave
Power
230V ± 10% 50/60 Hz
Operation Range
Up to 20 m indoors with no obstacles
Application
Indoor use only, up to 1.5kW resistive load per circuit
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Weight
50g
Housing
ABS
Compliance
EN 55015, EN 60669-2-1
Regulatory Compliance Mark
N5496
Dimensions
(LxWxH) 42mm x 37mm x 17mm
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information