FIBARO Z-Wave KeyFob

 

$79.99

Availability: In Stock

The FIBARO Keyfob is a battery powered, compact remote controller that allows you to control devices in your Z-Wave network.

  • Supports 30 different actions
  • Z-Wave Plus certified
  • Fully configurable, automatic pin lock prevents unauthorised use
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption

2 in stock

SKU: DHS-CON-KFB-FIB Categories: , Tags: ,

Description

Product Details

The FIBARO Keyfob is a Z-Wave Plus (500 series) compatible, battery-powered, compact remote controller designed to control devices within your Z-Wave network.

With six buttons, which support 30 different actions, the FIBARO Keyfob allows you to control Z-Wave devices within your Z-Wave network and run various scenes defined in your Z-Wave gateway.

FIBARO

Configure actions for one, two, three clicks, holding the button and specific button sequences to suit all your home automation needs.

The FIBARO Keyfob also features a built-in, configurable pin lock system that automatically locks the device after a short period of inactivity (60 seconds by default) which prevents unauthorized control of your home.

Note: This device is currently only compatible with the FIBARO Home Center 2 and FIBARO Home Center Lite Z-Wave gateways. Please ensure that you are running the latest Fibaro firmware (at least 4.120)

Documentation

FIBARO Keyfob User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz – AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave controller
Power
CR2450 3.0V battery (included)
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor and outdoor use
Operation temperature
10 ~ 40 °C
Storage temperature
-10 ~ 60 °C
Weight
100g
Dimensions
70mm x 38mm x 15mm
Housing
ABS

 

Quick Comparison

SettingsFIBARO Z-Wave KeyFob removeFIBARO Z-Wave Button (Yellow) removeFIBARO Home Center 3 Lite removeDOME Z-Wave Water Sensor removeFIBARO Z-Wave Swipe Pad White removeFAKRO Z-Wave W/Chain Winder15V remove
Image
SKUDHS-CON-KFB-FIBDHS-CON-SBUT-FIB-YLDHS-CON-HC3LITE-FIBDHS-SNS-FL-DOMDHS-CON-SCON-FIBDHS-WIN-WO-FKR-12
Rating
Price$79.99$79.99$219.99$54.99$219.99$424.99
Stock

2 in stock

2 in stock

20 in stock

20 in stock

Out of stock

Out of stock

Availability2 in stock2 in stock20 in stock20 in stockOut of stockOut of stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Read more

Read more

DescriptionThe FIBARO Keyfob is a battery powered, compact remote controller that allows you to control devices in your Z-Wave network.
  • Supports 30 different actions
  • Z-Wave Plus certified
  • Fully configurable, automatic pin lock prevents unauthorised use
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)
This new Fibaro home controller offers impressive hardware and integration options for installers and clients. This excellent Smart Home controller offers next generation hardware, including: COMMUNICATION TECHNOLOGY: Z-WAVE (700 series) NETWORK TECHNOLOGY: Wi-Fi 2.4GHz CPU: Single-Core ARM Cortex A7 900 MHz RAM MEMORY: 512 MB FLASH MEMORY: 4 GB eMMC The Fibaro Home Center 3 Lite is the perfect controller for small Home Automation projects, offering an excellent solution for smaller homes or apartments. The system is recommended for Smart Homes with up to 40 Z-Wave devices and 20 scenes. But, don't be mistaken by its size, the Fibaro HC3 Lite offers an affordable solution without having to compromise on quality. With this new system, you'll be able to automate a variety of solutions, including: Fibaro HC3 Lite SolutionsThe DOME Z-Wave Water Sensor is a compact, battery powered water leak sensor. Dome Leak Sensor now officially works with Vera and Wink Z-Wave Gateways! The Dome Home Automation Wireless Z-Wave Leak Sensor with Remote Probe helps you cap leaks before they turn into gushes, so you can keep a lid on the amount of money you spend on water-related repairs. Use this battery-powered, smart-home leak detector anywhere you need to monitor water lines for potential problems. Its low-profile design allows you to hook it up underneath appliances and a 4-foot range remote sensor probe makes it easier to monitor water activity in hard-to-reach places like sump pumps. Toilets, refrigerators, water heaters, and other appliances and fixtures that require water lines can generate costly bills from ongoing small leaks and unexpected major breaks. The Dome Home Automation Water Resistant Leak Sensor keeps you up to date on the health of water lines leading in and out of these systems, and it sends you customized alerts via your connected Z-Wave Hub. Shut off main valves and take action when required. Use with most any Z-Wave Hub including: Vera, Wink, Fibaro HC2, Home Seer, SmartThings, Harmony and more (subject to local RF availability) .
  • Built-in buzzer to alert those nearby
  • Includes remote sensor probe for tight spaces
  • Z-Wave Plus certified
  • Water resistant
DOME FS1
FIBARO Swipe is a wireless, battery powered gesture-controlled pad that allows you to activate Z-Wave scenes or commands with a simple wave of the hand. FIBARO Swipe has the appearance of a small tablet but instead of a touchscreen, it uses sophisticated motion identification technology to respond to six distinct hand gestures including four directional swipes (up, down, left, right), and two circular motions (left, right). A single gesture or a combination of gestures may be used – for example, swipe “down” to turn off the lights, “up” to open your blinds. With four short swipes, the living room is transformed into a home theater! Swipe’s only limit is your imagination.
  • Z-Wave Plus certified contactless gesture control
  • May be used with wet or dirty hands – e.g. turn on the lights in the kitchen or bathroom without getting the switches or wall dirty
  • Endless control possibilities – e.g. wave goodbye to activate your “going out” scene, swipe up to raise the volume on your sound system, swipe down to close difficult to reach skylight windows, reach out your hand from bed in the morning to activate your coffee machine
  • Endless placement possibilities – e.g. visible on the dresser or a wall with your favourite family photos, or hidden away under the kitchen counter or coffee table
  • Powered by 4xAA batteries or Micro-USB giving you ultimate flexibility
  • Available in black or white
The FAKRO Z-Wave W/Chain Winder 12V is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate. The European engineered, manufactured and certified FAKRO Z-Wave Chain Winder is the perfect solution to inaccessible windows and centralised managed buildings with automated natural ventilation. topbaner electric2
  • Program in conjunction with the FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
  • Remote control functionality for ease of use
  • Overload protection
  • Easily programmable to communicate with compatible Z-Wave gateways
  • Automatic switch-off once fully extended
Content

Product Details

The FIBARO Keyfob is a Z-Wave Plus (500 series) compatible, battery-powered, compact remote controller designed to control devices within your Z-Wave network. With six buttons, which support 30 different actions, the FIBARO Keyfob allows you to control Z-Wave devices within your Z-Wave network and run various scenes defined in your Z-Wave gateway. Configure actions for one, two, three clicks, holding the button and specific button sequences to suit all your home automation needs. The FIBARO Keyfob also features a built-in, configurable pin lock system that automatically locks the device after a short period of inactivity (60 seconds by default) which prevents unauthorized control of your home. Note: This device is currently only compatible with the FIBARO Home Center 2 and FIBARO Home Center Lite Z-Wave gateways. Please ensure that you are running the latest Fibaro firmware (at least 4.120)

Documentation

FIBARO Keyfob User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave controller
Power
CR2450 3.0V battery (included)
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor and outdoor use
Operation temperature
10 ~ 40 °C
Storage temperature
-10 ~ 60 °C
Weight
100g
Dimensions
70mm x 38mm x 15mm
Housing
ABS
 

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
Security: The FIBARO System will ensure the safety of you and your loved ones.
  • Smoke detection
  • Carbon monoxide detection
  • Flood detection
  • Operation as a wireless alarm system
  • Cooperation with the existing wired alarm system (eg SATEL) and security companies
  • Emergency door opening
  • Closing the roller shutters when you are away
Health: The FIBARO System will help you ensure the right conditions for your health.
  • Humidity control
  • Smart heating
  • Measurement of air quality and quality of PM2.5 and PM10 dust
  • Detection of hazardous gases
  • Control of ventilation and recuperation
  • Notifications in case of dangerous situations
Convenience: An intelligent home is primarily about increasing comfort and facilitating everyday activities.
  • Voice control
  • Remote home control from applications for phones, tablets and smart watches
  • Automatic scenarios - grouping devices, schedules and scenes
  • Control over devices with one button or remote control
  • Combining all elements of the house into one ecosystem
Sustainability: FIBARO will ensure that your home has a minimal impact on the surroundings and the environment.
  • Intelligent heating control leading to a reduction in the demand for heating media
  • Build awareness through the energy panel and measure current electricity consumption
  • The use of dimmers, thermostats or intelligent heads leads to significant energy savings
Savings: In the FIBARO system, your savings are very important.
  • The heating system is intelligently controlled through schedules and the presence of the household members
  • The use of dimmers and LED drivers leads to a reduction in bills
  • The ability to use scenarios and automation ensures that no devices will be redundantly used
Fibaro EcoSystem

Documentation

Fibaro Home Center 3 Lite User Manual  

Technical Specifications

Application Smaller houses (recommended up to 100 m2) and apartments
Number of Supported Devices Recommended up to 40 Z-Wave devices
Communication Technologies Z-Wave 700
Network Technologies Wi-Fi 2.4GHz
CPU Single-Core ARM Cortex A7 900 MHz
RAM 512MB
Flash Memory 4 GB eMMC
Possibilities of Automation LUA, block scenes, panels, schedules
Maximum number of scenes Recommended up to 20 scenes
IP Cameras Support 1 IP camera
Plugins and Quick Apps Support 5 plugins and 10 quick apps
Migration Mechanism No
Operating in Connected Gateways Mode Only SLAVE mode
The DOME Z-Wave Water Sensor is a Z-Wave Plus (500 series) compatible water sensor with a remote sensor probe for tight spaces. Simply place the device in a leak prone area and receive a notification from your Z-Wave network when a leak is detected allowing you to respond and prevent large scale water damage. Know when the sump pump fills up, BEFORE it overflows. Dangle the remote sensor probe in the tank to receive a notification and hear an alarm if the water level rises higher than it should. Use this device alongside a DOME Wireless Water Valve to automatically close your water valve when a leak is detected to greatly decrease the extent of water damage. Sleep easy knowing that your home is safe from water damage even when you are on vacation. This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controllers including:

Product Support

⇒ DOME Z-Wave Water Sensor User Manual ⇒ Using the DOME Z-Wave Water Sensor with Vera

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave sensor
Power
1 x CR2 3.0V battery (included)
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
5 ~ 40 °C
Storage temperature
-10 ~ 50 °C
Weight
80g
Dimensions
67mm x 67mm x 26mm
Housing
ABS

Product Details

The FIBARO Swipe is equipped with the most precise 3D motion detecting sensor of its kind, which ensures flawless recognition of the performed gestures. It presents a new and innovative way of controlling home automation devices in an intuitive and user friendly way. The magic of Swipe means you can position it in less conventional places as it will work through solid surfaces, like under a desk or behind a wall. And when displayed, Swipe can be used as a beautifully designed picture frame allowing you to easily change photos whenever you want through a simple to remove front panel. A special gesture controlled menu also allows you to add/remove or reset the device without dismantling it. With the endless possibilities of a gesture, Swipe is a perfect solution for the elderly and disabled, or people who find technology difficult to learn. Show them how to turn on the heating or ventilate the room without even getting up from the chair. Swipe needn’t be limited to the home either. Use it in the workplace to help you make the office as comfortable as the home. Control blinds, lights or a projector – all with a wave of your hand. FIBARO Swipe features the latest Z-Wave 500 series chip for improved wireless range, security and data transfer rates. Please note: Currently integrates with Australian Z-Wave certified (921.42MHz) Fibaro Home Center 2/Lite controllers only.

Installation

  • Place the Swipe onto its holder.
  • Place the Swipe within the direct range of your Z-Wave controller.
  • Plug the power source into the micro-USB port if required.
  • Set the main controller in (security/non-security) add mode (see the controller’s manual).
  • Move and hold your hand close to the center of the pad.
  • If the device is battery powered, high pitched beep will signal exiting the Standby Mode.
  • Loud sound sequence will confirm entering the menu, keep holding your hand.
  • After hearing two short beeps (green indicator colour), withdraw the hand and perform swiping up gesture to confirm selection (two beeps will confirm validity).
  • Wait for the adding process to end.
  • Successful adding will be confirmed by the Z-Wave controller’s message and 3 short beeps (green visual indicator colour).

Technical Specifications

RF Protocol Z-Wave Plus™
RF Frequency 921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Application Indoor use only
Power 4xAA Batteries or 5V DC Power Supply: Micro-USB
Operation Range Up to 30m indoors with no obstacles
Enclosure White or Black
Compliance EMC 2004/108/EC
R&TTE 1999/5/EC
RoHS 2011/65/EU
LVD 2006/95/EC
DC supply connector Micro-USB
Dimensions (LxWxH) 178 x 130 x 29 mm
 

Documentation

FIBARO Z-Wave SWIPE Manual FIBARO Swipe - Home Automation Gesture Control Pad

Product Description

For the most convenient use of your motorized window system, the FAKRO Z-Wave Chain Winder allows for remote accessibility anywhere around the home. Featuring an intuitive button prompt command process, this Z-Wave Chain Winder can easily be included in any existing Z-Wave system.

From skylights, awnings, tilted fixtures to bottom-hung/top-hung windows, the Chain Winder can be installed into many common window fittings. For the best results and consideration for your safety, always rely on a qualified electrician to install the Z-Wave Chain Winder device for you. The Chain Winder interacts with other Z-Wave products through a two-way radio communication system, which allows for uninterrupted operation on a consistent basis. The catch holder comfortably connects to the actuator chain for a strong and durable fitting, while the programming and manual operation buttons allow for easy inclusion with other Z-Wave devices.

Installation options:

1 Skylight or awning – fixed mounting (inside the frame)

2 Skylight or awning – with angle brackets (inside the frame)

3 Tilt or awning window – fixed mounting (sash mounted)

4 Tilt or awning window – with angle brackets (sash mounted)

5 Tilt or awning window - frame-mounted

 

Area of Application:

bottom-hung, top-hung windows and skylights

This product is compatible with:

Technical Specifications

RF Protocol
 Z-Wave™
RF Frequency
 921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
 Z-wave binary opener, routing slave
Status Indicator
 LED Lights
Operation Range
 Up to 40m without obstacles
Application  Indoor use only
Power supply
 12-15V DC (power supply not included)
Rated current  0.72A
Standby current  0.03A
Connection type Flying leads wires 2 x 0.75mm2 (0.4m)
Operation temperature
 -5 ~ 50 °C
Dimensions L x W x H
 262mm x 47mm x 33.5mm
Opening / Closing force  200 N
Chain reach  240mm
Weight
 0.85 kg
Housing
Metal Alloy
Limit stop  Microswitches
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information