REMOTEC Z-Wave Adv Remote

$69.99

Availability: Out of Stock

The DHS Z-Wave Advanced Remote (manufactured by Remotec) is capable of creating and controlling a Z-Wave network as well as acting as a secondary controller to an IP Gateway (like Vera 3/Lite).

  • Control devices individually or in groups using preset scenes(up to 12 scenes)
  • 1-year battery life
  • Compatible with most Z-Wave enabled devices
  • Supports multi-channel devices

Out of stock

SKU: DHS-CON-RMT-REM Categories: , Tags: ,

Description

The?DHS?Z-Wave Advanced Remote?is a smart Z-Wave controller designed to operate as either a primary controller, capable of creating and managing its own Z-Wave network, or a secondary controller to an IP Gateway (like Vera 3/Lite).

The?DHS Z-Wave Advanced Remote?works with almost all Z-Wave enabled devices including; binary switches, dimmers, thermostats, door locks, binary or multi-level sensors. Users can control their Z-Wave enabled devices individually or through ?Scene? control. A scene is a collection of Z-Wave devices configured to user-preferred settings, levels, modes or operating conditions which can all be activated with a single command.

The?DHS Z-Wave Advanced Remote is also equipped with a backlit LCD screen and an intelligent Self Navigated Button (SNB) system. Users can set up and operate their Z-Wave devices using this remote, and enjoy a networked, wireless home automation system anywhere at home.

Product Support

Manuals:

??REMOTEC ZRC-100 Advanced Remote User Manual (Size: 582KB)

??REMOTEC ZRC-100 Advanced Remote Quick Setup Guide (Size: 192KB)

Technical Specifications

RF Protocol
Z-Wave
RF Frequency
921.42Mhz – AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave Controller
Power
4 AAA batteries
Operation Range
Up to 30m indoors with no obstacles
Application
Indoor use only
Operation temperature
-10 ~ 40 ?C
Storage temperature
-10 ~ 70 ?C, humidity 5 ~ 95%RH(max)
Weight
150g
Housing
ABS
Compliance
C-Tick

Quick Comparison

SettingsREMOTEC Z-Wave Adv Remote removeFIBARO Z-Wave Button (Red) removeFIBARO Z-Wave Multi Sensor removeAEOTEC Z-Wave USB Stick removeFAKRO Z-Wave W/Chain Winder15V removeQUBINO Z-Wave 1D Relay remove
Image
SKUDHS-CON-RMT-REMDHS-CON-SBUT-FIB-RDDHS-SNS-MS-FIBDHS-CON-USB-AEODHS-WIN-WO-FKR-12DHS-LIT-SWW-QUB-01D
Rating
Price$69.99$78.00$84.99$89.99$449.99$88.99
Stock

Out of stock

2 in stock

Out of stock

Out of stock

Out of stock

Out of stock

AvailabilityOut of stock2 in stockOut of stockOut of stockOut of stockOut of stock
Add to cart

Read more

Add to basket

Read more

Read more

Read more

Read more

DescriptionThe DHS Z-Wave Advanced Remote (manufactured by Remotec) is capable of creating and controlling a Z-Wave network as well as acting as a secondary controller to an IP Gateway (like Vera 3/Lite).
  • Control devices individually or in groups using preset scenes(up to 12 scenes)
  • 1-year battery life
  • Compatible with most Z-Wave enabled devices
  • Supports multi-channel devices
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.The Aeotec Z-Stick (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices. ZW090aThe?FAKRO Z-Wave W/Chain Winder 12V?is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate. The European engineered, manufactured and certified FAKRO Z-Wave Chain Winder is the perfect solution to inaccessible windows and centralised managed buildings with automated natural ventilation. topbaner electric2
  • Program in conjunction with the?FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
  • Remote control functionality for ease of use
  • Overload protection
  • Easily programmable to communicate with compatible Z-Wave gateways
  • Automatic switch-off once fully extended
The?QUBINO 1D Relay Plus (by GOAP) is a single channel wireless Z-Wave relay with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve the range and stability of your Z-wave network. The module can be controlled either through the Z-wave network or through the wall switch manually. This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network. Supported switches The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.  
ContentThe?DHS?Z-Wave Advanced Remote?is a smart Z-Wave controller designed to operate as either a primary controller, capable of creating and managing its own Z-Wave network, or a secondary controller to an IP Gateway (like Vera 3/Lite). The?DHS Z-Wave Advanced Remote?works with almost all Z-Wave enabled devices including; binary switches, dimmers, thermostats, door locks, binary or multi-level sensors. Users can control their Z-Wave enabled devices individually or through ?Scene? control. A scene is a collection of Z-Wave devices configured to user-preferred settings, levels, modes or operating conditions which can all be activated with a single command. The?DHS Z-Wave Advanced Remote is also equipped with a backlit LCD screen and an intelligent Self Navigated Button (SNB) system. Users can set up and operate their Z-Wave devices using this remote, and enjoy a networked, wireless home automation system anywhere at home.

Product Support

Manuals: ??REMOTEC ZRC-100 Advanced Remote User Manual (Size: 582KB) ??REMOTEC ZRC-100 Advanced Remote Quick Setup Guide (Size: 192KB)

Technical Specifications

RF Protocol
Z-Wave
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave Controller
Power
4 AAA batteries
Operation Range
Up to 30m indoors with no obstacles
Application
Indoor use only
Operation temperature
-10 ~ 40 ?C
Storage temperature
-10 ~ 70 ?C, humidity 5 ~ 95%RH(max)
Weight
150g
Housing
ABS
Compliance
C-Tick

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Power
ER14250 ? AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Storage temperature
?10 ~ 50 ?C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS

Product Details

  • Compatible with any Z-Wave controller.
  • Detects motion using a passive IR sensor.
  • Measures the temperature.
  • Measures the light intensity.
  • Easy installation on a wall or any surface.
  • Protected against tampering and theft - once vibrations are detected, the notification is sent to the main controller.
  • Alarms of movement and temperature are signalled by LED diode blinking.
  • Simple earthquake detector mode.

Technical Specifications

Product Name?
FIBARO MOTION SENSOR FGMS-001 V2.4
Battery Type
CR123A battery, 3.6 VDC
Operation Range
30m
Light Intensity Measuring Range:
0-32000 LUX
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
0 - 50C*
Measured temperature range -20 to 100C
Temperature measuring accuracy
0,5 C
Housing
ABS
Size?(Diameter)
44 mm
       

Product Description

Create your own Z-Wave gateway. With Z-Stick Gen5 you?ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. You?ll benefit from a system that is locally hosted and cloud-free, whose features, security and privacy you can personally control, and you?ll be able to create your Z-Wave network at your own pace and within your own budget. Capable of controlling up to 232 different Z-Wave devices, including those that use the more advanced Z-Wave Plus, and able to run on both full-powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with open source software such as Domoticz, Home Assistant, OpenHab, and OpenHab2 and also works with commercially available software such as Axial Control, Homeseer, Indigo for MacOS. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.

Product Support

Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wireless firmware upgrades. Compatible with Z-Wave enabled home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included. Manuals: ? Aeotec Z-Stick Gen5p product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave controller
Power
USB DC 4.75V to 5.25V
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
20g
Housing
ABS
Dimensions
(LxWxH) 1.1 x 0.4 x 3.5 inches
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

For the most convenient use of your motorized window system, the FAKRO Z-Wave Chain Winder allows for remote accessibility anywhere around the home. Featuring an intuitive button prompt command process, this Z-Wave Chain Winder can easily be included in any existing Z-Wave system.

From skylights, awnings, tilted fixtures to bottom-hung/top-hung windows, the Chain Winder can be installed into many common window fittings. For the best results and consideration for your safety, always rely on a qualified electrician to install the Z-Wave Chain Winder device for you. The Chain Winder interacts with other Z-Wave products through a two-way radio communication system, which allows for uninterrupted operation on a consistent basis. The catch holder comfortably connects to the actuator chain for a strong and durable fitting, while the programming and manual operation buttons allow for easy inclusion with other Z-Wave devices.

Installation options:

1 Skylight or awning ? fixed mounting (inside the frame)

2 Skylight or awning ? with angle brackets (inside the frame)

3 Tilt or awning window ? fixed mounting (sash mounted)

4 Tilt or awning window ? with angle brackets (sash mounted)

5 Tilt or awning window - frame-mounted

 

Area of Application:

bottom-hung, top-hung windows and skylights

This product is compatible with:

Technical Specifications

RF Protocol
?Z-Wave?
RF Frequency
?921.42Mhz - AU/NZ ?approved RF for Z-wave
Z?Wave device type
?Z-wave binary opener, routing slave
Status Indicator
?LED Lights
Operation Range
?Up to 40m without obstacles
Application ?Indoor use only
Power supply
?12-15V DC (power supply not included)
Rated current ?0.72A
Standby current ?0.03A
Connection type Flying leads wires 2 x 0.75mm2 (0.4m)
Operation temperature
?-5 ~ 50 ?C
Dimensions L x W x H
?262mm x 47mm x 33.5mm
Opening / Closing force ?200 N
Chain reach ?240mm
Weight
?0.85 kg
Housing
Metal Alloy
Limit stop ?Microswitches
? Compatible with any Z-Wave Controller.
? Dimensions (W x H x D) 41.8 x 36.8 x 15.4 mm
? Power monitoring accuracy P=5-50W, +/-3W; P?50W, +/-3%;
? Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125?C
??Support for the connection of digital temperature sensor (optional part)
? 2 binary inputs offer the option to connect additional devices such as sensors, switches/pushbuttons, etc, ?

Product Support

On/Off Flush Relay Switch with dry contacts?capable of operating a load of up to 10A. Dry (Voltage-free) Contacts Requires 3-wire (including neutral) installation - further information is in our 2-wire/3-wire guide Works with AC or DC power supply (110-230V AC or 24-30V DC). Extra switch inputs for controlling additional associated devices or 2-way installations (see note) Extra Features The QUBINO Flush 1D Relay includes extra features to make it even more useful in your home automation system. Temperature Sensor Using an optional temperature sensor, the QUBINO Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems. Binary Switch and Sensor Input The Relay can be used with up to three external switches enabling it to control other Z-Wave devices by Association or Trigger Scenes in the main controller. Strengthens Z-Wave Connectivity The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network. The QUBINO Flush 1D Relay Plus is?Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information.

Technical Specification

Product Name?
?Flush 1 relay
Powered by
24V DC or 240V AC
Operation Range
30m
Max Load
2300W (230VAC)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
-10 -+40 C*
Measured temperature range 0,50 C (within 0o?C - 40o?C range) (optional sensor)
Temperature measuring accuracy
0,5 C
Housing
ABS
Dimensions (W x H x D)
41.8 x 36.8 x 15.4 mm
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information