AEOTEC Nano WallSwipe

 

$88.99

Availability: In Stock

WallSwipe integrates with Aeotec’s Nano Dimmer, Nano Switch or Nano Shutter in-wall controllers to offer intelligent and convenient capacitive wall switch and motion switch control. WallSwipe includes a screw-less switch plate compatible with Australian wall switch installations.

Aeotec Nano WallSwipeAeotec Nano WallSwipe2

The technical specifications of Aeotec WallSwipe can be viewed at that link.

Package contents:

  1. 2x Screws
  2. 1.5mm JST connection cable

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

It contains small parts; keep away from children.

11 in stock

SKU: DHS-LIT-SWIPE-AEO Categories: , Tags: , ,

Description

Product Support

Manuals:

⇒  WallSwipe for Nano user guide

Technical Specifications

RF Protocol
None
RF Frequency
None
Device type
Sensor
Power
Low voltage
Operation Range
Near Z-Wave module
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
-10 ~ 50 °C
Colour
White
Weight
50g
Housing
ABS
Dimensions
105 x 42 x 34mm
Warranty 12 Months

Quick Comparison

SettingsAEOTEC Nano WallSwipe removeAEOTEC Nano Dimmer Bypass removeAEOTEC Z-Wave USB Stick removeAeotec Smart Home Hub - Works with SmartThings removeAEOTEC Smart Switch 6 removeAEOTEC TriSensor remove
Image
SKUDHS-LIT-SWIPE-AEODHS-LIT-BPASS-AEODHS-CON-USB-AEOAE-GP-AEOHUBV3ANDHS-LIT-SWP-AEODHS-SNS-MS-AEO-03
Rating
Price$88.99$22.99$88.99$199.99$79.99$64.99
Stock

11 in stock

2 in stock

Out of stock

Out of stock

1 in stock

Out of stock

Availability11 in stock2 in stockOut of stockOut of stock1 in stockOut of stock
Add to cart

Add to basket

Add to basket

Read more

Read more

Add to basket

Read more

DescriptionWallSwipe integrates with Aeotec's Nano Dimmer, Nano Switch or Nano Shutter in-wall controllers to offer intelligent and convenient capacitive wall switch and motion switch control. WallSwipe includes a screw-less switch plate compatible with Australian wall switch installations. Aeotec Nano WallSwipeAeotec Nano WallSwipe2 The technical specifications of Aeotec WallSwipe can be viewed at that link. Package contents:
  1. 2x Screws
  2. 1.5mm JST connection cable

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

It contains small parts; keep away from children.
Stop dimmed lights flickering. Dimming energy-saving lights is complicated – there’s a lot of different technologies built into modern bulbs. That’s why dimmed lights sometimes flicker or remain on – power trickles through. The AEOTEC Dimmer Bypass works with the AEOTEC Nano Dimmer to remove the signals from your power line that cause low-watt lightbulbs to flicker. z wave bypass dimmer If you want to control low-voltage lighting that uses less than 4 Watts using an AEOTEC Nano Dimmer you will need to include the AEOTEC Dimmer Bypass in your installation to ensure the lights do not flicker.The Aeotec Z-Stick (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices. ZW090aThe Aeotec Smart Home Hub Works with SmartThings enables you to automate and control a huge range of smart devices and make them work in unison to create a seamless smart home. The hub utilises Zigbee Wi-Fi and Z-Wave protocols. The SmartThings app for iOS and Android enables monitoring and control of your connected devices from anywhere. Youll also receive alerts from connected devices when there is unexpected activity. Voice control is available via Alexa and Google Assistant.Control any switch. From anywhere. Wirelessly. Power sockets and light switches: amazing inventions. They literally changed the world. But if you’re not standing right next to them or can’t reach them, they’re limited. No more. The future is smarter. So is your home. The Aeotec Smart Switch 6 offers completely wireless control of your switches and sockets. aeotec z wave plug in smart switch 6 ef6 Enhancing a power outlet near you. Every country is different. And we’ve engineered a different plug for every country. Within the dramatically small size of the Aeotec Smart Switch 6 lies engineering focused not just on intelligence and reliability, but also on safety. From Australia to Andorra, from the United States to the United Kingdom, every Aeotec Smart Switch 6 has been custom engineered to maximize the volts and amperage it can offer without ever compromising on quality or your safety. The Aeotec Smart Switch 6 isn’t just a smart switch, it’s a safe switch. ZW096dTriSensorP Three different sensors built into the AEOTEC TriSensor's small finish. A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters. sensor functionality
Content

Product Support

Manuals: ⇒  WallSwipe for Nano user guide

Technical Specifications

RF Protocol
None
RF Frequency
None
Device type
Sensor
Power
Low voltage
Operation Range
Near Z-Wave module
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
-10 ~ 50 °C
Colour
White
Weight
50g
Housing
ABS
Dimensions
105 x 42 x 34mm
Warranty 12 Months

Product Description

Compatible bulbs. There are a lot of different types of low-power light bulbs that your home may have; Bypass has been designed to work with most of them. It’s been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.

Product Support

Wiring diagram. ZW150w 3-wire connection with neutral and bypass load. ZW150w1 2-wire connection without neutral and bypass load.   Manuals: ⇒  Aeotec bypass for Nano Dimmer product manual

Technical Specifications

Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
black
Weight
10g
Housing
ABS
Size
(0.98 x 0.39 x 0.75 in)
Warranty 12 Months

Product Description

Create your own Z-Wave gateway. With Z-Stick Gen5 you’ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. You’ll benefit from a system that is locally hosted and cloud-free, whose features, security and privacy you can personally control, and you’ll be able to create your Z-Wave network at your own pace and within your own budget. Capable of controlling up to 232 different Z-Wave devices, including those that use the more advanced Z-Wave Plus, and able to run on both full-powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with open source software such as Domoticz, Home Assistant, OpenHab, and OpenHab2 and also works with commercially available software such as Axial Control, Homeseer, Indigo for MacOS. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.

Product Support

Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wireless firmware upgrades. Compatible with Z-Wave enabled home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included. Manuals: ⇒ Aeotec Z-Stick Gen5p product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave controller
Power
USB DC 4.75V to 5.25V
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
White
Weight
20g
Housing
ABS
Dimensions
(LxWxH) 1.1 x 0.4 x 3.5 inches
Compliance
Z-Wave Plus certified
Warranty 12 Months
The Aeotec Smart Home Hub Works with SmartThings enables you to automate and control a huge range of smart devices and make them work in unison to create a seamless smart home. The hub utilises Zigbee Wi-Fi and Z-Wave protocols. The SmartThings app for iOS and Android enables monitoring and control of your connected devices from anywhere. Youll also receive alerts from connected devices when there is unexpected activity. Voice control is available via Alexa and Google Assistant.

Product Description

Compact without compromise, at just 60 x 60 mm the Aeotec Smart Switch 6 is over 84% smaller than the first edition. And even though it’s 43% smaller than the recently released Smart Switch Gen5, it still benefits from its industry-leading technology. Smart plug. Convenient plug. There’s smart. There’s convenient. The Aeotec Smart Switch 6 is both. z wave power strip Uncrowded. Uncomplicated. Plugs that block multiple power outlets aren’t just inconvenient, they’re annoying. The Aeotec Smart Switch 6 has been designed to reduce the possibility of that happening. At only 60 mm / 2.3 inches in size, the Aeotec Smart Switch 6 can be used without blocking the outlet it's installed next to. Safe switch. The home isn’t just where the heart is, it’s where your family should be safest. In the regions where electrical standards allow, the Aeotec Smart Switch 6 prevents objects from being inserted into it via its inbuilt socket protection. Protective switch. Your loved ones are protected and so are your valuables. The Aeotec Smart Switch 6 features inbuilt surge and overcurrent protection helping to prevent your electronics from ever being damaged. Powerful switch. The Aeotec Smart Switch 6 can power devices that draw up to 15 amps of power. But safety comes first, so a different Aeotec Smart Switch 6 has been engineered for every country it’s available in, ensuring that it’s never overpowered and never unsafe. Perfect distance. Wireless doesn’t mean weak. The Aeotec Smart Switch 6 can communicate with other Z-Wave devices at distances up to 100 metres / 300 feet. Updated switch. Your smart switch will keep getting smarter thanks to Aeotec’s over-the-air firmware updates. Whenever new firmware is released, you’ll be able to update your Aeotec Smart Switch 6 wirelessly. Plug and play. Anyone can install the Aeotec Smart Switch 6. Plug it into a wall outlet and press the action button on the front. Everything else is handled by your Z-Wave hub.

Product Support

Works with VeraAeotec LED Bulb with Vera Manuals: ⇒  Aeotec Smart Switch 6 product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Switch
Power
240V AC
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
white
Weight
100g
Housing
ABS
Size
60mm x 60mm x 25mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Motion sensor Motion sensor. Motion for security. Motion for presence. Motion for management. The AEOTEC TriSensor is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data. The AEOTEC TriSensor makes your home automation system more powerful and more intelligent. Temperature sensor. From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The AEOTEC TriSensor provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 °C and reporting those temperature changes back to a smart home gateway. Light sensor. Automated lighting is only as smart as the system that powers it. With the AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor is the smarts behind smart lighting. The perfect sensor comes with the perfect accessories. The AEOTEC TriSensor has three different accessories, each designed to make the installation of the sensor perfect for your home. Place it anywhere. Installation Recessor. (sold separately) Install the AEOTEC TriSensor in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. Discrete and for corner installations, the mounting arm allows you to rotate your AEOTEC TriSensor to best ensure motion is detected when you want it to be. Tape. Weighing only 52 grams, the AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.

Product Support

Manuals: ⇒ Aeotec TriSensor product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
1 x CR123A battery
Operation Range
Up to 150m outdoors without obstacles
Operation temperature
0 - 70 °C
Storage temperature
-10 - 80 °C
Colour
White
Weight
52g
Housing
ABS
Dimensions
45mm x 45mm x 35mm
Compliance
Z-Wave Plus certified
Warranty 12 Months
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information