The?AEOTEC WallMote?is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, the?AEOTEC WallMote?is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.
Simple to install.
The?AEOTEC WallMote?is the wall switch for anywhere. You can mount it in just two steps!
Attach the mounting plate.
Attach the mounting plate. The?AEOTEC WallMote?s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.
Attach WallMote.
The?AEOTEC WallMote?is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.
Control one Z-Wave device. Control many. And all with a single tap.
There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of your?AEOTEC WallMote?s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.
Control a light. Control a room. Control a home.
Because the?AEOTEC WallMote?communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top.
Wireless switch.
To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres. Secure switch.
Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date. Subtle switch.
Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep Simple recharging.
Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable. Haptic feedback.
It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote?s touch glass. But you will feel the change. WallMote?s haptic engine confirms your every action via a click sensation. Gen5 built in.
WallMote and WallMote Quad are part of Aeotec?s Gen5 range of Z-Wave devices. Built upon the latest version of Z-Wave- Z-Wave Plus ? cutting-edge performance and security is crafted into Z-Wave?s most advanced battery-powered wall switch.
On any wall.
The?AEOTEC WallMote?is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, the?AEOTEC WallMote?is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.
Simple to install.
The?AEOTEC WallMote?is the wall switch for anywhere. You can mount it in just two steps!
Attach the mounting plate.
Attach the mounting plate. The?AEOTEC WallMote?s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.
Attach WallMote.
The?AEOTEC WallMote?is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.
Stop dimmed lights flickering.
Dimming energy-saving lights is complicated ? there?s a lot of different technologies built into modern bulbs.
That?s why dimmed lights sometimes flicker or remain on ? power trickles through.?The?AEOTEC Dimmer Bypass?works with the?AEOTEC Nano Dimmer?to remove the signals from your power line that cause low-watt lightbulbs to flicker.
If you want to control low-voltage lighting that?uses less than 4 Watts?using an?AEOTEC Nano Dimmer?you will need to include the?AEOTEC Dimmer Bypass?in your installation to ensure the lights do not flicker.
Control any switch. From anywhere.?Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you?re not standing right next to them or can?t reach them, they?re limited.
No more. The future is smarter. So is your home. The?AEOTEC Dual Nano Switch InWall?offers complete wireless control of your switches and sockets.
The?AEOTEC Nano Switch?offers total control, easily. Impossibly small, each?AEOTEC Dual Nano Switch?installs invisibly behind any of your home?s existing switches or power sockets. Simply unscrew the faceplate, install the?AEOTEC Nano Switch?behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
The?Fibaro Dimmer Bypass 2?(FGB-002)?is a?supplementary?device to the?Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
Easy to use and install
Supports low power lamps such as LEDs or?energy saving compact fluorescent lamps
The Smart Motion Works with SmartThings sensor enables you to receive alerts of motion activity in your spaces. Additionally youll be able to set connected devices to turn on and off as people come and go. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
Range Extender 6.
The Range Extender 6 keeps it reliable. We all know how annoying weak wireless signals can be. Weak WiFi and poor phone signals are frustrating. Imagine if your smart home was also plagued by weak wireless signals and the same frustrations? Your smart home would not be very smart. The Range Extender 6 from Aeotec ensures that your connected home stays connected. It intelligently listens to the commands and reports that your Z-Wave network sends, actively capturing weak signals and then amplifying and repeating them.
Content
Product Description
Control on tap.
Control one Z-Wave device. Control many. And all with a single tap.
There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of your?AEOTEC WallMote?s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.
Control a light. Control a room. Control a home.
Because the?AEOTEC WallMote?communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top.
Wireless switch.
To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres.
Secure switch.
Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.
Subtle switch.
Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep
Simple recharging.
Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable.
Haptic feedback.
It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote?s touch glass. But you will feel the change. WallMote?s haptic engine confirms your every action via a click sensation.
Gen5 built in.
WallMote and WallMote Quad are part of Aeotec?s Gen5 range of Z-Wave devices. Built upon the latest version of Z-Wave- Z-Wave Plus ? cutting-edge performance and security is crafted into Z-Wave?s most advanced battery-powered wall switch.
Compatible bulbs.
There are a lot of different types of low-power light bulbs that your home may have; Bypass has been designed to work with most of them. It?s been designed to stop most bulbs from flickering including?static and dimmable LEDs and CFLs.
Once installed behind a switch or socket, the?AEOTEC Dual Nano Switch offers unparalleled wireless control via Z-Wave protocol. It lets you control, automate, and monitor your lights and power sockets. From anywhere. Anytime. And it does it all through enhancement ? with the AEOTEC Nano Switch, your sockets and switches don?t have to be replaced and they?ll continue to offer the same manual control that you?re used to.
The?Fibaro Dimmer Bypass 2?is designed to support?Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw a minimum of 5W (e.g LED lighting).
It can be used in the case of connecting LED bulbs or energy-saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of a 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cos?>0.5)
Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.
This product must be installed by a qualified electrician.Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.For a warranty claim, you have to provide an installation compliance certificate from your electrician.
The Smart Motion Works with SmartThings sensor enables you to receive alerts of motion activity in your spaces. Additionally youll be able to set connected devices to turn on and off as people come and go. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
Product Description
Repeats wireless signals.
Repeats wireless signals.For your smart home to be perfect, its wireless signals need to be reliable. Range Extender 6 captures weak or slow signals and efficiently repeats them on to the rest of your Z-Wave network.
Amplifies wireless signals.
Amplifies wireless signals.Not only does Range Extender 6 accurately repeat Z-Wave signals, it amplifies them too and helps improve the reliability and accuracy of your Z-Wave network.
Big on impact.?Small in size.
Range Extender 6 is a power-outlet friendly device, designed to be as small and as compact as possible without compromising on performance. so that it doesn?t block neighbouring power outlets.