REMOTEC ZRC-90 Scene Master

 

$75.99

Availability: In Stock

REMOTEC ZRC-90 Scene Master is a Z-Wave enabled secondary controller for your Z-Wave network. When buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal that it can use to trigger unlimited control possibilities. With 8 buttons, each supporting a long-press capability, you can control 16 different actions in your central controller. The ZRC-90 is a great solution for triggering events more quickly than taking out your smartphone and running a home control App. The Scene Master is ideal for kids, elderlies and guests who may not have full access to your smart home’s mobile application and hence may not have the rights to switch on various lighting, heating, air conditioning and other home appliance. With a convenient snap-in wall mount, the ZRC-90 can also be removed to keep it handy while you go about your home for the ultimate in simple convenience.

5 in stock

SKU: DHS-CON-SCON-REM-90 Categories: , Tags: ,

Description

The REMOTEC ZRC-90 Scene Master works with VeraEdge, Fibaro HC2/Lite and Homesear.

  • Controls up to 8×2 pre-set scenes and
  • One learn-key setup and simple operation
  • Report for key pressed 1 time, 2 times, released and held down
  • Unlimited controlling capability through gateway
  • Able to act as a primary or secondary controller
  • Z-Wave Plus compliant
  • Super thin, elegant design and able to mount to the wall-bracket

Product Support

Notice: If you are installing the entire Z-Wave™ system for the first time, please refer to the installation guide of your Z-Wave gateway before installing this device.

Manuals:

⇒ Installation Manual   (Size: 190KB)

Technical Specifications

RF Protocol
Z-Wave Plus™, SDK version: 6.51.03
RF Frequency
921.42Mhz – AU/NZ  approved RF for Z-wave
Application
Indoor use only
Power
2 x AAA batteries
Operation Range
Up to 30m indoors with no obstacles
Enclosure
White
Compliance
EMC 2004/108/EC
Operating Temp.  -15C ~ 60C
Dimensions
110mm x 70mm x 13.5mm

Quick Comparison

SettingsREMOTEC ZRC-90 Scene Master removeGLOBALCACHE Flex IP PoE Bridge removeFIBARO Z-Wave Button (Yellow) removeGC Flex Link Serial RS232 Cable removeFIBARO Z-Wave Implant removeFIBARO Z-Wave Button (Black) remove
Image
SKUDHS-CON-SCON-REM-90GC-FLEX-IP-P-AUDHS-CON-SBUT-FIB-YLGC-FLC-SL-232DHS-SNS-IMP-FIBDHS-CON-SBUT-FIB-BL
Rating
Price$75.99$214.99$79.99$44.99$71.99$79.99
Stock

5 in stock

Out of stock

2 in stock

Out of stock

14 in stock

1 in stock

Availability5 in stockOut of stock2 in stockOut of stock14 in stock1 in stock
Add to cart

Add to basket

Read more

Add to basket

Read more

Add to basket

Add to basket

DescriptionREMOTEC ZRC-90 Scene Master is a Z-Wave enabled secondary controller for your Z-Wave network. When buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal that it can use to trigger unlimited control possibilities. With 8 buttons, each supporting a long-press capability, you can control 16 different actions in your central controller. The ZRC-90 is a great solution for triggering events more quickly than taking out your smartphone and running a home control App. The Scene Master is ideal for kids, elderlies and guests who may not have full access to your smart home's mobile application and hence may not have the rights to switch on various lighting, heating, air conditioning and other home appliance. With a convenient snap-in wall mount, the ZRC-90 can also be removed to keep it handy while you go about your home for the ultimate in simple convenience.Global Cache's iTach Flex allows you to take control of your electronic devices. It is an incredibly powerful smart end-point that allows almost any electronic device to be controllable, accessed, monitored, and automated within a wired network as well as controlled via a mobile interface such as a Smartphone or Tablet, or any type of personal computer. When used with a compatible application, this extremely compact, multipurpose, smart device can adjust its functionality based upon the type of Global Cache Flex Link adapters being used. The iTach Flex provides powerful, inexpensive, and simple connectivity to almost any electrical device so it can be controlled and automated using an app on a smartphone, tablet, or any other user interface. Historically, automation and control products have been complex and expensive, used almost exclusively by the very wealthy. That changes with the easy availability of control apps on the iTunes Store and Android Marketplace, and the ability to connect almost any device in the home to a WiFi or wired network using the iTach Flex. The extremely small footprint, slightly larger than a pack of gum, is ideally suited for transparent coupling and seamless integration to any device in homes or businesses. The Flex’s unique hardware form, with a WiFi or network connection to a 3.5mm jack that supports almost any type of protocol translation cable, offers the ability to bridge products and systems in a way never available before. Entertainment systems are the most common household devices to be controlled, and most of those devices respond to IR codes, the infrared commands sent by your typical remote control. Integrated tightly with the iTach Flex, is a no-charge, cloud-based service instantly providing the required IR codes for the equipment being controlled. The ease of use and versatility of the cloud-based system ensures the compatibility and expandability of any system. The Flex also offers built-in IR learning. Once an entertainment system is under control, the next step may be the shades, the lighting, the sprinklers, or the Jacuzzi. The iTach Flex, with its scalable and simple to use design, will connect them all at the site of the equipment, with no need for a complex rack-mounted system. The iTach Flex introduces a new concept of distributed automation and control, with smart end-points that enhance and connect standalone devices, allowing for them to be accessed and controlled by apps on smartphones, tablets, you name it. Finally, this device uses Power over Ethernet (PoE), eliminating the need for yet another cable in your home. Contents
  • iTach Flex Module (LAN)
  • USB Micro Adapter
Note: the iTach Flex to your electrical device, you will need to determine your device's required connector (RS-232, IR, contact closure) and purchase the corresponding Flex Link cable. Simply Connect With Global Caché The Global Caché family of connectivity products provides choices for the industry professional and the consumer – significantly reducing costs and providing a scalable platform for today and the future. Global Caché's belief in open systems and the evolution of the automation market is being played out today since cost-effective PC-based and phone-based control applications are now becoming widely available. iTach devices, Network Adapters, and other Global Caché connectivity products have radically changed the automation dynamic. These products are engineered to integrate easily into any control environment, even high-end proprietary systems, providing a path to open systems and better competitive leverage.
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)

For Use With The ITach Flex

The Global Caché Flex Link Serial Cable (RS232) connects to your iTach Flex Module via the 3.5mm jack to enable IP/WiFi control for RS232 serial components. Designed as a total RS232 solution, the cable automatically detects whether you need a crossover or straight-through connection, and then switches to fit your application. It also comes with a gender changer to accommodate both male and female connections.
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs.The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)
ContentThe REMOTEC ZRC-90 Scene Master works with VeraEdge, Fibaro HC2/Lite and Homesear.
  • Controls up to 8x2 pre-set scenes and
  • One learn-key setup and simple operation
  • Report for key pressed 1 time, 2 times, released and held down
  • Unlimited controlling capability through gateway
  • Able to act as a primary or secondary controller
  • Z-Wave Plus compliant
  • Super thin, elegant design and able to mount to the wall-bracket

Product Support

Notice: If you are installing the entire Z-Wave™ system for the first time, please refer to the installation guide of your Z-Wave gateway before installing this device. Manuals: ⇒ Installation Manual   (Size: 190KB)

Technical Specifications

RF Protocol
Z-Wave Plus™, SDK version: 6.51.03
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Application
Indoor use only
Power
2 x AAA batteries
Operation Range
Up to 30m indoors with no obstacles
Enclosure
White
Compliance
EMC 2004/108/EC
Operating Temp.  -15C ~ 60C
Dimensions
110mm x 70mm x 13.5mm
The iTach Flex enables you to easily control any Infra-Red (IR) appliance via your home's LAN network. Appliances such as TVs, DVD/Blu-Ray, Amplifiers can all be controlled from your Z-Wave network controller (via local LAN),  and then control it from your Z-Wave controllers such as Fibaro HC3 or VERA. The iTach Flex includes the unique 'Global Port', enabling you to choose which types of device the iTach Flex controls by selecting any of the Flex Link Cables:
  • Flex Link IR Blaster - Blasts IR signals to all devices in 10m range
  • Flex Link IR Emitter - single IR emitter
  • Flex Link Tri-Port IR Cable - enables up to 3 IR emitters to be connected to on iTach Flex
Note - the Flex Link cables are not included with the iTach Flex, you need to choose at least one Flex Link Cable when you order the iTach Flex. The iTach Flex includes access to the Global Cache IR database as well as being able to learn your appliance's IR codes.
  • Smart end-points enhance and connect standalone devices
  • Standard 3.5mm jack supports almost any protocol using Flex Link cable
  • Built-in HTTP support for simple and instant network connectivity
  • Downloadable iLearn software allows capture and playback of IR commands
  • Downloadable iHelp software simplifies network discovery and setup
  • 4MB flash memory – store web pages and files accessible via URL
  • 4-conductor Global Port allows for versatility using Flex Link cables
  • Built-in IR learning and access commands to cloud-based IR database
  • Made in the USA and RoHS compliant
Power Input:
  • 5V DC at 250mA (90 to 230V wall power adapter included)
  • USB micro adapter cable draws power from USB port (included)
Network Connection: Wired TCP/IP – RJ45 standard Ethernet connector. 100/10 Mbits Ethernet protocol.   FIBARO HC2 INTEGRATION HC2 Virtual Device To enable the Fibaro Home Center to use the iTach devices, we need to create a Virtual Device. This Virtual Device sends the correct IR commands to the iTach to control the particular appliance and can be used from a browser, smartphone or tablet. This guide below shows you how to:
  • Create a Virtual Device in Fibaro Home Center
  • Use IR Commands that the iTach has 'learnt' for a specific appliance
  • Use the Virtual Device to control the appliance using IR commands via the iTach IR adapter
Make sure you have configured your iTach adapter and have used it to 'learn' the IR codes of the appliance you wish to control. Full information is in this document.

Product Support

Videos: ⇒ Global Cache Flex IP iTach Flex Manuals: ⇒ GlobalCache iTachFlex Specifications (Size: 1390 KB) ⇒ Global Cache iTach Flex API and downloads ⇒ Fibaro HC2 to Global Cache iTach Flex Guide (Size: 648 KB)

Technical Specification

Specifications
 Manufacturer  Global Cache
 Manufacturer Product No.  FlexIP-P US
 UPC  810466010709
 Third-Party Applications  Available within the Apple App Store and the Google Play Store
 Power  • Built-in Power over Ethernet (PoE)
 Setup & Configuration  Integrated web server for easy configuration
 iHelp Setup Utility  Downloadable iHelp software simplifies network discovery and setup
 IR Learning  • From 20 to 200 kHz • Downloadable iLearn software - capture and playback of IR commands for control
 Network Connection  • DHCP and static IPWired TCP/IP • RJ45 standard Ethernet connector • 100/10 Mbits Ethernet protocol
 LED Indicators  Power and connectors to indicate activity and status
 Global Port  4 Conductor connection (TRRS: tip, ring, ring, sleeve) - allows for versatility through the use of our Flex Link cables
 Serial/RS232  • Male DB9 with automatic configuration sensing • 600 baud to 115.2 Kbaud data rates supported • Odd, Even, and None parity settings • Bi-directional with hardware RTS/CTS flow control
 Flex Link Cables  Supports IR Out, IR Blaster, IR Tri-Port, Serial and Relay & Sensor
 IR Output  • From 20 to 500 kHz • 3.5mm connector • Supports • IR Emitter • IR Blaster • IR Tri-Port (emitter-emitter-emitter or emitter-emitter-blaster • GC-CGX - For Xantech compatibility
 Control APIs  • TCP • ASCII textual commands compatible with iTach and GC-100 protocol • Comma delimited, carriage return terminated • HTTP • New web-based control using HTTP commands with JSON payload data
 File Storage  • Store web pages and files in a standard FAT file system • Accessible via URL from any location on or outside the network • Allows for web page control of your devices
 Mounting Dock  • Allows for simple installation in any location • Screw down the mounting dock and Flex units can be clicked in and out as needed
 Dimensions  2.58° L x 1.22° W x 0.82° H
 Certifications  FCC (Part 15, Class B), C-tick, RoHs compliant

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS

Simply Connect With Global Cache

The Global Caché family of connectivity products provides choices for the industry professional and the consumer, significantly reducing costs and providing a scalable platform for today and the future. Global Caché's belief in open systems and the evolution of the automation market is being played out today since cost-effective PC-based and phone-based control applications are now becoming widely available. iTach devices, Network Adapters, and other Global Caché connectivity products have radically changed the automation dynamic. These products are engineered to integrate easily into any control environment, even high-end proprietary systems, providing a path to open systems and better competitive leverage. Flex Link Serial cables allow serial devices to be controlled with the Flex family of products. With the Flex Link, RS485 Serial Cable, the Flex Link RS232 Serial cable, and the Flex Link RS232 Mini Jack cable, RS232 and RS485 serial devices can be simply connected to the network for seamless control. The Flex Link RS232 Serial cable and the Flex Link RS232 Mini Jack cable provide connections to devices with different physical RS232 connectors. The Flex Link RS232 Serial cable features a standard DB9 connector that allows for swapping pins in setup. The Flex Link RS232 Mini Jack cable utilizes a 3.5 mm mini-jack, allowing for direct connections to 3.5 mm mini-jack RS232 ports and serial inputs on many common TVs and other AV devices. The iTach Flex includes the unique 'Global Port', enabling you to choose which types of device the iTach Flex controls by selecting any of the Flex Link Cables:
  • Flex Link IR Blaster - Blasts IR signals to all devices in 10m range
  • Flex Link IR Emitter - single IR emitter
  • Flex Link Tri-Port IR Cable - enables up to 3 IR emitters to be connected to on iTach Flex
Note - the Flex Link cables are not included with the iTach Flex, you need to choose at least one Flex Link Cable when you order the iTach Flex. FIBARO HC2 INTEGRATION HC2 Virtual Device To enable the Fibaro Home Center to use the iTach devices, we need to create a Virtual Device. This Virtual Device sends the correct IR commands to the iTach to control the particular appliance and can be used from a browser, smartphone or tablet. This guide below shows you how to:
  • Create a Virtual Device in Fibaro Home Center
  • Use IR Commands that the iTach has 'learnt' for a specific appliance
  • Use the Virtual Device to control the appliance using IR commands via the iTach IR adapter
Make sure you have configured your iTach adapter and have used it to 'learn' the IR codes of the appliance you wish to control. Full information is in this document.

Product Support

Videos: ⇒ Global Cache Flex IP iTach Flex Manuals: ⇒ GlobalCache iTachFlex Specifications (Size: 1390 KB) ⇒ Global Cache iTach Flex API and downloads ⇒ Fibaro HC2 to Global Cache iTach Flex Guide (Size: 648 KB)

Technical Specifications

  • Manufacturer Part #: FLC-SL-485
  • Interface: Serial RS485; 4-wire (full duplex) and 2-wire (half duplex) capable
  • Connector: 5 pin screw terminal block
  • Speed: 300 baud to 115.2 Kbaud
  • Cable/Connector: 5 feet, 3.5 mm plug connects to Flex Link Port
  • Warranty: 2 Years

Product Description

Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption. Works as a Z-Wave signal repeater. Allows for connecting sensors: 6 DS18B20 sensors, 1 DHT sensor, 2 2-wire analog sensor, 2 3-wire analog sensor, 2 binary sensors. Built-in temperature sensor. This product works with : Fibaro Home Controller 3/2/Lite Please note: THE DEVICE IS NOT COMPATIBLE WITH VERA HOME CONTROLLERS Before installation Connect only in accordance with one of the diagrams, The device is powered with secure voltage; nevertheless, the user should be extra careful or should commission the installation to a qualified person, Do not connect devices that are not compliant with the specification, Do not connect other sensors than DS18B20 or DHT22 to SP and SD terminals, Do not connect sensors to SP and SD terminals with wires longer than 3 meters, Do not load the device outputs with a current exceeding 150mA, Every connected device should be compliant with the relevant safety standards, Unused lines should be left insulated. Tips for arranging the antenna: Locate the antenna as far from metal elements as possible (connecting wires, bracket rings, etc.) in order to prevent interferences, Metal surfaces in the direct vicinity of the antenna (e.g. flush mounted metal boxes, metal door frames) may impair signal reception! Do not cut or shorten the antenna – its length is perfectly matched to the band in which the system operates. Make sure no part of the antenna sticks out of the wall switch box.

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information