Showing 1–16 of 52 results

  • SHELLY Dimmer 2 – 10 PACK

    Shelly Dimmer 2 WiFi-operated dimmer

    Control a wide range of halogen lights, dimmable LED and ferromagnetic transformers from anywhere with the smallest WiFi-operated dimmer in the world – Shelly Dimmer2 working without a neutral line.

    Shelly Dimmer2

    • has an embedded webserver
    • has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc.
    • can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component
    • overload, and temperature protection

    This product is approved for use in Australia but must be installed by a licensed electrician.

    $539.99 Add to basket
  • SHELLY 2.5 Double Relay WiFi Switch – 10 PACK

    SHELLY 2.5 RELAY SWITCH, ROLLER SHUTTER 2X10A

    • Wi-Fi Connected
    • For two electrical circuits (up to 2.3 kW each) with energy consumption monitoring
    • Mobile App Control
    • REST API to connect Shelly with your existing home automation system
    • Wide range of AC and DC power supply: 110-230V ± 10, 50 / 60Hz AC or 24-60V DC

    Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated double relay switch with roller shutter functionality in the world – Shelly 2.5

    Shelly 2.5 WiFi Double Relay Switch Roller Shutter, Neutral wire is required.

    Has an embedded web server;

    Has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc;

    Can be used for two electrical circuits (up to 2.3 kW each) with energy consumption monitoring for each channel, overload, and temperature protection.

    Can operate as a bi-directional motor control module (for drapes, blinds, garage doors, etc.).

    Can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component.

     

    TECHNICAL SPECIFICATIONS

    • Intelligent On/Off
    • Power Supply: 110-230V ±10, 50/60Hz AC and 24-60V DC
    • Compatible with all major international voltage standards.
    • 2 Channels – Maximum load current per output: 10A / 230V 50/60Hz.
    • Complies with the following EU standards: RE Directive 2014/53/EU, LVD 2006/95/WE, EMC 2004/108/WE, RoHS2 2011/65/UE
    • Operational temperature: -40 to +40 °C
    • Dimensions (LxWxH): 39 x 36 x 17 mm
    • Minimum mounting opening: Ø ≥ 50mm
    • Radio signal power: 1mW
    • Wireless/WiFi Protocol: 802.11 b/g/n
    • Radio frequency: 2400 – 2500 MHz
    • Range: up to 50 m outdoors and up to 30 m indoors (depending on the building materials)
    • Electrical power consumption < 1 W
    • Microprocessor control
    • Independent dual power metering for each channel
    • Overload and temperature protection
    • Can connect to any Wi-Fi network or can operate as an Access Point
    • Controlled via WiFi and a mobile phone, computer, automation system or any other device supporting HTTP and/or UDP protocol
    • Controlled elements: 2 electrical circuits
    • Executive elements: 2 relays
    • Can be operated along with momentary keys or push-button switches
    • Has an integrated precise power meter.

    This product is approved for use in Australia but must be installed by a licensed electrician.

    $309.99 Add to basket
  • Z-Wave 2 Dim Clipsal Saturn

    Note: This is an updated version of the Z-Wave Double Switch Lighting Set with improved functionality.

    This set allows you to control two separate lighting circuits with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the solid state (ON/OFF) buttons. The set contains:

    • One QUBINO Z-Wave Double Switch InWall Controller
    • One Clipsal 2 Gang Saturn Series Wall Plate
    • Two Clipsal Saturn solid state (ON/OFF) buttons

    The QUBINO Z-Wave Double Switch InWall Controller (by GOAP) includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush 2 Relay ZMNHBD1”. It also allows for 2-3 way wired switching.

    Clipsal Saturn Series Wall Plates are available in the following colours; Espresso Black, Ocean Mist and Pure White. Please specify the colour in your order comments.

    An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark. You can order the LED option for your buttons here.

    Note: This product must be installed by a qualified electrician.

    $299.99 Add to basket
  • SHELLY 1L WiFi Switch – 10 PACK

    Shelly 1L Single wire WiFi-operated relay

    Convert any existing wall switch into a smart switch without changing the wiring or running new cables with Shelly 1L. The first device in the world that is able to automate even the appliances wired with no neutral present. Thanks to its small size and wide range of voltage support, it’s a real innovation!

    NO NEUTRAL REQUIRED. Power and control your light, fan, or other appliances with only a live wire, no neutral required to be connected to the device.

    OVERHEATING PROTECTION. If the Shelly 1L reached high temperatures, it will switch OFF the output to protect itself and your home appliances.

    • MQTT ENABLED. Easily integrate Shelly 1L to your existing home server using the MQTT or CoAP protocols
    • REST API. Use the REST API to connect Shelly 1L to your existing home automation system.
    • HIGHLY COMPATIBLE. Compatible with Android, iOS, Amazon Alexa and Google Assistant. Control your appliance with your voice.
    • SUNRISE/SUNSET SCHEDULES. Shelly 1L can automatically follow the sunrise and sunset and control your lighting accordingly.

    10 Pack

    This product is approved for use in Australia but must be installed by a licensed electrician.

    $239.99 Add to basket
  • Z-Wave 2 Dim Clipsal Impress

    Note: This is an updated version of the Z-Wave Double Switch Lighting Set with improved functionality.

    This set allows you to control two seperate lighting circuits with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the solid state (ON/OFF) buttons. The set contains:

    • One QUBINO Z-Wave Double Switch InWall Controller
    • One Clipsal 2 Gang Impress Series Wall Plate
    • Two Clipsal Impress solid state (ON/OFF) buttons

    The QUBINO Z-Wave Double Switch InWall Controller (by GOAP) includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush 2 Relay ZMNHBD1”. It also allows for 2-3 way wired switching.

    Clipsal Impress Series Wall Plates are available in the following colours; Chrome, Gold, Brushed Aluminium, Brushed Brass and White. Please specify the colour in your order comments.

    An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark. You can order the LED option for your buttons here.

    Note:This product must be installed by a qualified electrician.

    $234.99 Add to basket
  • SHELLY 1PM WiFi Relay – 10 PACK

    Shelly 1PM Wifi Module is the smallest, smartest & most powerful WiFi switch for your automation solution

    The  Relay Switch Shelly 1PM WiFi Module may control 1 electrical circuit up to 3.5 kW. It is intended to be mounted behind power sockets and light switches or other places with limited space. Shelly may work as a standalone device or as an accessory to another home automation controller.

    The User can register and access Shelly Cloud, using either Android or iOS mobile applications, or any internet browser and the website: https://my.Shelly.cloud/.

    Mobile App Control – Turn devices on/off directly from your smartphone or tablet.

    WiFi Connected – Just connect Shelly to your WiFi network and begin the ultimate experience of controlling your home with your phone.

    Home assistant compatible – Control your appliance with your voice. The Shelly 1 OS is Google Home and Amazon Echo Compatible.

    Weekly Scheduling – Create custom daily schedules for your devices.

    Following the Sunlight – 1PM Wifi Module can automatically turn on/off based on the sunrise and sunset hours.

    Up To 3500W – With Shelly Plug you can control a wide range of devices and appliances.

    Shelly for developers

    REST API – With the embedded web server and the common HTTP commands Shelly can be made compatible with Vera, Fibaro, SmartThings, HomeSeer, Savant, HomeKit, etc. Visit our REST API for developers, to create your own cloud solution.

    Support – Shelly has HTTP/UDP support. Visit the Shelly forum for more details.

    Shelly Cloud for Shelly 1PM Wifi Module – One App – Unlimited Functionality

    Specifications:

    • Power supply: 110-240V ±10% 50/60Hz AC / 24-60V DC
    • Max load: 16A/240V
    • Complies with AU standards
    • Working temperature: – 40°C up to 40°C
    • Radio signal power: 1mW
    • Radio protocol: WiFi 802.11 b/g/n
    • Frequency: 2400 – 2500 MHz
    • Operational range (depending on local construction): up to 50 m outdoors, up to 30 m indoors
    • Dimensions (HxWxL): 41 x 36 x 17 mm
    • Electrical consumption: < 1 W

    Note:

    The device only works on 2.4 GHz WiFi b/g/n.

    Shelly 1PM has a power measurement function.

    Shelly 1PM only works with a neutral line.

    Shelly 1PM has not dry / voltage-free / potential-free contacts.

    This product is approved for use in Australia but must be installed by a licensed electrician. 

    $229.99 Add to basket
  • Z-Wave Dbl Sw Clipsal Saturn

    Note: This is an updated version of the Z-Wave Double Switch Lighting Set with improved functionality.

    This set allows you to control two seperate lighting circuits with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the solid state (ON/OFF) buttons. The set contains:

    • One QUBINO Z-Wave Double Switch InWall Controller
    • One Clipsal 2 Gang Saturn Series Wall Plate
    • Two Clipsal Saturn solid state (ON/OFF) buttons

    The QUBINO Z-Wave Double Switch InWall Controller (by GOAP) includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush 2 Relay ZMNHBD1”. It also allows for 2-3 way wired switching.

    Clipsal Saturn Series Wall Plates are available in the following colours; Espresso Black, Ocean Mist and Pure White. Please specify the colour in your order comments.

    An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark. You can order the LED option for your buttons here.

    Note:This product must be installed by a qualified electrician.

    $219.99 Add to basket
  • SHELLY Dimmer 2 – 4 PACK

    Shelly Dimmer 2 WiFi-operated dimmer

    Control a wide range of halogen lights, dimmable LED and ferromagnetic transformers from anywhere with the smallest WiFi-operated dimmer in the world – Shelly Dimmer2 working without a neutral line.

    Shelly Dimmer2

    • has an embedded webserver
    • has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc.
    • can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component
    • overload, and temperature protection

    This product is approved for use in Australia but must be installed by a licensed electrician.

    $199.99 Add to basket
  • Z-Wave Dim Clipsal Saturn

    Note: This is an updated version of the Z-Wave Single Switch Lighting Set with improved functionality.

    This set allows you to control a single lighting circuit with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the solid state (ON/OFF) button. The set contains:

    • One GOAP Z-Wave Single Switch InWall Controller
    • One Clipsal 1 Gang Saturn Series Wall Plate
    • One Clipsal Saturn solid state (ON/OFF) button

    The GOAP Z-Wave Single Switch InWall Controller includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush 1 Relay ZMNHAD1”. It also allows for 2-3 way wired switching.

    Clipsal Saturn Series Wall Plates are available in the following colours; Espresso Black, Ocean Mist and Pure White. Please specify the colour in your order comments.

    An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark. You can order the LED option for your buttons here.

    Note: This product must be installed by a qualified electrician.

    $189.99 Add to basket
  • SHELLY 1 WiFi Switch – 10 PACK

    Shelly 1 Smart Home Automation WiFi Switch Compatible with Alexa and Google Home

    Schedule Function: Set timer and countdown, create scenes, you can set timer schedules to automatically turn on/off your light, fans, or appliances according to your daily habits with the Shelly 1 Wifi Switch. For example, you can set the corridor lights to turn on when you come back home at night and to turn off when you leave home

    Voice Control: Shelly 1 Wifi Switch works with Alexa, Google Home and IFTTT, instead of reaching for the switch button every time, you can easily turn on/off the home appliances by your voice command, no hub required, create scenes on Alexa or Google Home, very convenient especially when your hands are full

    App Control from Anywhere: You can control lights, routers, fans, TV, coffee maker or any other appliance under 16A/3500W remotely with a single press on the mobile app Shelly even you’re away. No hub required, compatible with most Wifi routers (only with 2.4GHz wireless network)

    Group Control: Create a group for all smart relays for one press control, one smart relay can be controlled by multiple mobile phones, share it with your family, everyone can control it easily. Perfect for hard-to-reach appliances & devices without ON/OFF switches

    Compact Design: Compact smart relay switch can be installed in the junction box and make your outlet and switch smart while retaining manual control buttons. An essential accessory for your home automation system.

    WiFi-operated Relay Switch

    Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.)  from anywhere with the smallest WiFi-operated relay switch.

    Shelly 1 Wifi Switch Open Source

    • has an embedded webserver
    • has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc.
    • can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component.

    10 Pack

    This product is approved for use in Australia but must be installed by a licensed electrician.

    $179.99 Add to basket
  • Z-Wave Dbl Sw Clipsal Impress

    Note: This is an updated version of the Z-Wave Double Switch Lighting Set with improved functionality.

    This set allows you to control two seperate lighting circuits with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the solid state (ON/OFF) buttons. The set contains:

    • One QUBINO Z-Wave Double Switch InWall Controller
    • One Clipsal 2 Gang Impress Series Wall Plate
    • Two Clipsal Impress solid state (ON/OFF) buttons

    The QUBINO Z-Wave Double Switch InWall Controller (by GOAP) includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush 2 Relay ZMNHBD1”. It also allows for 2-3 way wired switching.

    Clipsal Impress Series Wall Plates are available in the following colours; Chrome, Gold, Brushed Aluminium, Brushed Brass and White. Please specify the colour in your order comments.

    An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark. You can order the LED option for your buttons here.

    Note:This product must be installed by a qualified electrician.

    $144.95 Add to basket
  • Z-Wave Dim Clipsal Impress

    Note: This is an updated version of the Z-Wave Single Switch Lighting Set with improved functionality.

    This set allows you to control a single lighting circuit with Z-Wave. It allows for remote control using a connected Z-Wave gateway or manual control using the solid state (ON/OFF) button. The set contains:

    • One QUBINO Z-Wave Single Switch InWall Controller
    • One Clipsal 1 Gang Impress Series Wall Plate
    • One Clipsal Impress solid state (ON/OFF) button

    The QUBINO Z-Wave Single Switch InWall Controller (by GOAP) includes additional features compared to the previous dimmer used in this set. It uses the latest 500 Series Z-Wave chip, has a greater communication range and is fully integrated with Vera ADD Wizards as “Qubino Flush 1 Relay ZMNHAD1”. It also allows for 2-3 way wired switching.

    Clipsal Impress Series Wall Plates are available in the following colours; Chrome, Gold, Brushed Aluminium, Brushed Brass and White. Please specify the colour in your order comments.

    An LED option is available for the Clipsal buttons. The LED is always on and helps you to locate the button in the dark. You can order the LED option for your buttons here.

    Note: This product must be installed by a qualified electrician.

    $124.95 Read more
  • HOMEKIT SINGLE SWITCH

    FIBARO Single Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. It allows controlling connected devices either via HomeKit technology (using Bluetooth® low energy) or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

    $119.99 Add to basket
  • SHELLY 2.5 Double Relay WiFi Switch – 4 PACK

    SHELLY 2.5 RELAY SWITCH, ROLLER SHUTTER 2X10A

    • Wi-Fi Connected
    • For two electrical circuits (up to 2.3 kW each) with energy consumption monitoring
    • Mobile App Control
    • REST API to connect Shelly with your existing home automation system
    • Wide range of AC and DC power supply: 110-230V ± 10, 50 / 60Hz AC or 24-60V DC

    Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated double relay switch with roller shutter functionality in the world – Shelly 2.5

    Shelly 2.5 WiFi Double Relay Switch Roller Shutter, Neutral wire is required.

    Has an embedded web server;

    Has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc;

    Can be used for two electrical circuits (up to 2.3 kW each) with energy consumption monitoring for each channel, overload, and temperature protection.

    Can operate as a bi-directional motor control module (for drapes, blinds, garage doors, etc.).

    Can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component.

     

    TECHNICAL SPECIFICATIONS

    • Intelligent On/Off
    • Power Supply: 110-230V ±10, 50/60Hz AC and 24-60V DC
    • Compatible with all major international voltage standards.
    • 2 Channels – Maximum load current per output: 10A / 230V 50/60Hz.
    • Complies with the following EU standards: RE Directive 2014/53/EU, LVD 2006/95/WE, EMC 2004/108/WE, RoHS2 2011/65/UE
    • Operational temperature: -40 to +40 °C
    • Dimensions (LxWxH): 39 x 36 x 17 mm
    • Minimum mounting opening: Ø ≥ 50mm
    • Radio signal power: 1mW
    • Wireless/WiFi Protocol: 802.11 b/g/n
    • Radio frequency: 2400 – 2500 MHz
    • Range: up to 50 m outdoors and up to 30 m indoors (depending on the building materials)
    • Electrical power consumption < 1 W
    • Microprocessor control
    • Independent dual power metering for each channel
    • Overload and temperature protection
    • Can connect to any Wi-Fi network or can operate as an Access Point
    • Controlled via WiFi and a mobile phone, computer, automation system or any other device supporting HTTP and/or UDP protocol
    • Controlled elements: 2 electrical circuits
    • Executive elements: 2 relays
    • Can be operated along with momentary keys or push-button switches
    • Has an integrated precise power meter.

    This product is approved for use in Australia but must be installed by a licensed electrician.

    $119.99 Add to basket
  • SHELLY RGBW 2 WiFi – 4 PACK

    Shelly RGBW2 Smart Home Automation WiFi Solution for any LED strips

    Make your LED strips smart in one easy step. Shelly RGBW2 can connect like any LED controller and allows you to control all your lighting directly from a mobile device or tablet.

    • Wireless: No HUB required – Connect Shelly RGBW2 directly to your Wi-Fi at home.

    • Control remotely: Control the LED lighting at home, no matter where you are. Now you won’t be leaving the lights on and your home won’t welcome you in darkness.

    • Highly compatible: Compatible with Android, iOS, Amazon Alexa and Google Assistant. Control your appliances with your voice.

    • WIDE RANGE OF VOLTAGE SUPPORT: With Shelly RGBW2 you can use White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.

      WEEKLY SCHEDULES: Create custom daily schedules for your lighting to turn on/off or change colour.

    • SUNRISE/SUNSET SCHEDULES: Automatically follow the sun and turn Shelly RGBW2 on/off based on sunrise and sunset hours.

    • COUNTDOWN TIMER: No more forgotten turned on appliances. The integrated countdown timer can automatically switch off your lights after an hour.

    • Colour effects of Shelly RGBW2: Three unique colourful effects that will set the right mood for your party or help you relax at home.

    Use it with any LED Strips and bulbs.

    • Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.

    Pack of 4

    This product is approved for use in Australia but must be installed by a licensed electrician.

    $114.99 Add to basket