SHELLY 1 WiFi Switch
$20.99
Shelly 1 Smart Home Automation WiFi Switch Compatible with Alexa and Google Home
Schedule Function: Set timer and countdown, create scenes, you can set timer schedules to automatically turn on/off your light, fans, or appliances according to your daily habits with the?Shelly 1 Wifi Switch. For example, you can set the corridor lights to turn on when you come back home at night and to turn off when you leave home
Voice Control: Shelly 1 Wifi Switch works with Alexa, Google Home and IFTTT, instead of reaching for the switch button every time, you can easily turn on/off the home appliances by your voice command, no hub required, create scenes on Alexa or Google Home, very convenient especially when your hands are full
App Control from Anywhere: You can control lights, routers, fans, TV, coffee maker or any other appliance under 16A/3500W remotely with a single press on the mobile app Shelly even you’re away. No hub required, compatible with most Wifi routers (only with 2.4GHz wireless network)
Group Control: Create a group for all smart relays for one press control, one smart relay can be controlled by multiple mobile phones, share it with your family, everyone can control it easily. Perfect for hard-to-reach appliances & devices without ON/OFF switches
Compact Design: Compact smart relay switch can be installed in the junction box and make your outlet and switch smart while retaining manual control buttons. An essential accessory for your home automation system.
WiFi-operated Relay Switch
Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.)? from anywhere with the smallest WiFi-operated relay switch.
Shelly 1 Wifi Switch Open Source
- has an embedded webserver
- has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc.
- can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component.
This product is approved for use in Australia but must be installed by a licensed electrician.
Discount per quantity
| Quantity | 4 - 7 | 8+ |
|---|---|---|
| Price | $19.94 | $18.89 |
| % Discount | 5% | 10% |
Buy More for Bigger Savings!
50 in stock
Quick Comparison
| Settings | SHELLY 1 WiFi Switch remove | SHELLY 1L WiFi Switch remove | SHELLY Bypass remove | FIBARO Z-Wave Dimmer 2 remove | FIBARO ZWave Single Switch 2 remove | FIBARO Dimmer Bypass 2 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | 
| 
| 
| 
| 
| 
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | SH-SHELLY1 | SH-SHELLY1L | SH-SHELLYBYPASS | DHS-LIT-DMW-FIB-02 | DHS-LIT-SWW-FIB-012 | DHS-LIT-BPASS-FIB-2 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | $20.99 | $24.99 | $9.99 | $84.99 | $84.99 | $19.99 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | 50 in stock | 50 in stock | 990 in stock | 20 in stock | Out of stock | 12 in stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | 50 in stock | 50 in stock | 990 in stock | 20 in stock | Out of stock | 12 in stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Shelly 1 Smart Home Automation WiFi Switch Compatible with Alexa and Google HomeSchedule Function: Set timer and countdown, create scenes, you can set timer schedules to automatically turn on/off your light, fans, or appliances according to your daily habits with the?Shelly 1 Wifi Switch. For example, you can set the corridor lights to turn on when you come back home at night and to turn off when you leave home Voice Control: Shelly 1 Wifi Switch works with Alexa, Google Home and IFTTT, instead of reaching for the switch button every time, you can easily turn on/off the home appliances by your voice command, no hub required, create scenes on Alexa or Google Home, very convenient especially when your hands are full App Control from Anywhere: You can control lights, routers, fans, TV, coffee maker or any other appliance under 16A/3500W remotely with a single press on the mobile app Shelly even you're away. No hub required, compatible with most Wifi routers (only with 2.4GHz wireless network) Group Control: Create a group for all smart relays for one press control, one smart relay can be controlled by multiple mobile phones, share it with your family, everyone can control it easily. Perfect for hard-to-reach appliances & devices without ON/OFF switches Compact Design: Compact smart relay switch can be installed in the junction box and make your outlet and switch smart while retaining manual control buttons. An essential accessory for your home automation system.WiFi-operated Relay SwitchControl a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.)? from anywhere with the smallest WiFi-operated relay switch.Shelly 1 Wifi Switch Open Source
| Shelly 1L Single wire WiFi-operated relayConvert any existing wall switch into a smart switch without changing the wiring or running new cables with Shelly 1L. The first device in the world that is able to automate even the appliances wired with no neutral present. Thanks to its small size and wide range of voltage support, it's a real innovation! NO NEUTRAL REQUIRED. Power and control your light, fan, or other appliances with only a live wire, no neutral required to be connected to the device. OVERHEATING PROTECTION.?If the Shelly 1L reached high temperatures, it will switch OFF the output to protect itself and your home appliances.
| What is a Shelly Bypass Used For And Why Do I Need OneWith the recent introduction of the Shelly 1L to the Shelly Home Automation range you may have noticed an add-on that is available specifically with the Shelly 1L called a Shelly Bypass. We sell the Shelly Bypass in the store as a standalone product or as an add-on with any Shelly 1L or Shelly Dimmer 2 devices but what actually are they and do you need one The great thing with both the Shelly 1L and Shelly Dimmer 2 is they work without the need of a neutral line. That’s great news for us here in Australia if you are wanting to add a Shelly device behind a light switch where typically we do not have a neutral wire. What is a Shelly BypassA Shelly Bypass is required where there is neutral wire and where the power consumption is less than 20 watts. If the load of the light is very low typically LED lights you need to add some form of load thats where the need of a bypass comes in Rather than turning off the light the Shelly 1L and Shelly Dimmer 2 dim the light so low it stops glowing leaving a very small current flowing through the circuit of the Shelly Device to keep it running even when the light is off. Do I need a Shelly BypassMost LED lightbulbs in Australia are under 20 watts. The Shelly 1L or Dimmer 2 require a minimum load to be able to power the module so if you are below this value then you will need one. If you are using the Shelly 1L or the Shelly Dimmer 2 in a place with no neutral wire such as behind a light switch and you live in Australia yes you most likely do. Where do I install the Shelly BypassIf you are installing a Shelly Bypass in a lighting circuit in Australia you will need to attach the Shelly Bypass between the Output wire going to the lightbulb and the neutral going to the other side of the lightbulb. It will feel very unnatural to connect the wire this way. Most people in Australia have a ceiling rose or light fitting which allows the space for a Shelly Bypass. They are really small being only 39 mm x 23 mm x 7 mm. Do I need a Shelly Bypass if I have a Neutral WireNo you only need a Shelly Bypass where there is no Neutral wire. What about Dimmable Loads do I need one to stop lights flickeringYes if you are using Dimmable LEDs with less than 50 Watts total load they may be subject to flickering especially when dimmed down low. The bypass will stop this flickering. If you have a Neutral wire you may wish to consider either the Shelly 1 or the Shelly 1PM unless you need the di | The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is the newest version of a popular wireless controller designed to operate behind a wall switch.
| The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW.
| The?Fibaro Dimmer Bypass 2?(FGB-002)?is a?supplementary?device to the?Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content |
Shelly 1L Single wire WiFi-operated relayConvert any existing wall switch into a smart switch without changing the wiring or running new cables with Shelly 1L. The first device in the world that is able to automate even the appliances wired with no neutral present. Thanks to its small size and wide range of voltage support, it's a real innovation! NO NEUTRAL REQUIRED. Power and control your light, fan, or other appliances with only a live wire, no neutral required to be connected to the device. OVERHEATING PROTECTION.?If the Shelly 1L reached high temperatures, it will switch OFF the output to protect itself and your home appliances.
| The Fibaro Z-Wave In-Wall Dimmer 2 is designed to operate with or without a neutral wire. It may be used as a switch in systems without a neutral wire.
In the case of a 2-wire connection (no neutral), the Fibaro Z-Wave In-Wall Dimmer 2 may require a minimum load of 50W depending on the specifics of the connected load.
When used with a Fibaro Dimmer Bypass 2 it may operate with any compatible (see below) load from 5W. Before committing to buy Fibaro Dimmer Bypass 2 please check if your load can be properly controlled by Fibaro Dimmer 2 without a bypass device.
Do not connect this device to a power supply without a load. Only lighting devices may be connected to this device.
As a dimmer it operates with the following loads:
QUEENSLAND
NSW
DocumentationFibaro Z-Wave In-Wall Dimmer 2 ManualTechnical Specifications
| Product DetailsThe Fibaro Z-Wave Single Switch 2 is a smart Z-Wave module capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene. The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician. This Fibaro Z-Wave Single Switch 2 requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply. The Fibaro Z-Wave Single Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits. This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
Configuring Z-Wave DevicesZ-Wave devices often have several configurable parameters which you can change using your Vera?s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active or the type of manual switch connected to a Z-Wave light controller. Every available configurable parameter is listed in your device?s user manual. In most cases, your device?s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section. Please check the maximum load before installing or operating. This installation must be done by a certified electrician in Australia and New Zealand. Before engaging an electrician, check that they provide an electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.Technical Specifications
Wiring Diagram | The?Fibaro Dimmer Bypass 2?is designed to support?Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw a minimum of 5W (e.g LED lighting).
It can be used in the case of connecting LED bulbs or energy-saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of a 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cos?>0.5)
Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For a warranty claim, you have to provide an installation compliance certificate from your electrician.
DocumentationFibaro Z-Wave In-Wall Dimmer 2 Manual Fibaro Z-Wave Dimmer 2 Bypass ManualTechnical Specifications
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
