SHELLY 2.5 Double Relay WiFi Switch

$39.99

Availability: In Stock

SHELLY 2.5 RELAY SWITCH, ROLLER SHUTTER 2X10A

  • Wi-Fi Connected
  • For two electrical circuits (up to 2.3 kW each) with energy consumption monitoring
  • Mobile App Control
  • REST API to connect Shelly with your existing home automation system
  • Wide range of AC and DC power supply: 110-230V ? 10, 50 / 60Hz AC or 24-60V DC

Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated double relay switch with roller shutter functionality in the world ? Shelly 2.5

Shelly 2.5 WiFi Double Relay Switch Roller Shutter, Neutral wire is required.

Has an embedded web server;

Has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc;

Can be used for two electrical circuits (up to 2.3 kW each) with energy consumption monitoring for each channel, overload, and temperature protection.

Can operate as a bi-directional motor control module (for drapes, blinds, garage doors, etc.).

Can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system?s component.

 

TECHNICAL SPECIFICATIONS

  • Intelligent On/Off
  • Power Supply: 110-230V ?10, 50/60Hz AC and 24-60V DC
  • Compatible with all major international voltage standards.
  • 2 Channels ? Maximum load current per output: 10A / 230V 50/60Hz.
  • Complies with the following EU standards: RE Directive 2014/53/EU, LVD 2006/95/WE, EMC 2004/108/WE, RoHS2 2011/65/UE
  • Operational temperature: -40 to +40 ?C
  • Dimensions (LxWxH): 39 x 36 x 17 mm
  • Minimum mounting opening: ? ? 50mm
  • Radio signal power: 1mW
  • Wireless/WiFi Protocol: 802.11 b/g/n
  • Radio frequency: 2400 ? 2500 MHz
  • Range: up to 50 m outdoors and up to 30 m indoors (depending on the building materials)
  • Electrical power consumption < 1 W
  • Microprocessor control
  • Independent dual power metering for each channel
  • Overload and temperature protection
  • Can connect to any Wi-Fi network or can operate as an Access Point
  • Controlled via WiFi and a mobile phone, computer, automation system or any other device supporting HTTP and/or UDP protocol
  • Controlled elements: 2 electrical circuits
  • Executive elements: 2 relays
  • Can be operated along with momentary keys or push-button switches
  • Has an integrated precise power meter.

This product is approved for use in Australia but must be installed by a licensed electrician.

Discount per quantity

Quantity 4 - 7 8+
Price $37.99 $35.99
% Discount 5% 10%

Buy More for Bigger Savings!

50 in stock

SKU: SH-SHELLY25 Categories: , Tags: ,

Description

Quick Comparison

SettingsSHELLY 2.5 Double Relay WiFi Switch removeQUBINO Z-Wave 2 Relays removeFIBARO Dimmer Bypass 2 removeSHELLY Plus 1PM removeFIBARO Z-Wave Double Switch 2 removeSHELLY RGBW 2 WiFi remove
Image
SKUSH-SHELLY25DHS-LIT-SWW-QUB-02DHS-LIT-BPASS-FIB-2SH-SHELLY1PM+DHS-LIT-SWW-FIB-022SH-SHELLYRGBW2
Rating
Price$39.99$88.99$19.99$29.99$84.99$34.99
Stock

50 in stock

Out of stock

12 in stock

40 in stock (can be backordered)

20 in stock

1 in stock

Availability50 in stockOut of stock12 in stock40 in stock (can be backordered)20 in stock1 in stock
Add to cart

Add to basket

Read more

Add to basket

Add to basket

Add to basket

Add to basket

Description

SHELLY 2.5 RELAY SWITCH, ROLLER SHUTTER 2X10A

  • Wi-Fi Connected
  • For two electrical circuits (up to 2.3 kW each) with energy consumption monitoring
  • Mobile App Control
  • REST API to connect Shelly with your existing home automation system
  • Wide range of AC and DC power supply: 110-230V ? 10, 50 / 60Hz AC or 24-60V DC
Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated double relay switch with roller shutter functionality in the world ? Shelly 2.5

Shelly 2.5 WiFi Double Relay Switch Roller Shutter, Neutral wire is required.

Has an embedded web server; Has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc; Can be used for two electrical circuits (up to 2.3 kW each) with energy consumption monitoring for each channel, overload, and temperature protection. Can operate as a bi-directional motor control module (for drapes, blinds, garage doors, etc.). Can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system?s component.   TECHNICAL SPECIFICATIONS
  • Intelligent On/Off
  • Power Supply: 110-230V ?10, 50/60Hz AC and 24-60V DC
  • Compatible with all major international voltage standards.
  • 2 Channels ? Maximum load current per output: 10A / 230V 50/60Hz.
  • Complies with the following EU standards: RE Directive 2014/53/EU, LVD 2006/95/WE, EMC 2004/108/WE, RoHS2 2011/65/UE
  • Operational temperature: -40 to +40 ?C
  • Dimensions (LxWxH): 39 x 36 x 17 mm
  • Minimum mounting opening: ? ? 50mm
  • Radio signal power: 1mW
  • Wireless/WiFi Protocol: 802.11 b/g/n
  • Radio frequency: 2400 ? 2500 MHz
  • Range: up to 50 m outdoors and up to 30 m indoors (depending on the building materials)
  • Electrical power consumption < 1 W
  • Microprocessor control
  • Independent dual power metering for each channel
  • Overload and temperature protection
  • Can connect to any Wi-Fi network or can operate as an Access Point
  • Controlled via WiFi and a mobile phone, computer, automation system or any other device supporting HTTP and/or UDP protocol
  • Controlled elements: 2 electrical circuits
  • Executive elements: 2 relays
  • Can be operated along with momentary keys or push-button switches
  • Has an integrated precise power meter.
This product is approved for use in Australia but must be installed by a licensed electrician.
The?QUBINO Double Switch (by GOAP) is a Z-Wave module for switching on/off one or two electrical devices (e.g. light, fan, etc ...). The module can be controlled either through the Z-wave network or through the wall switch manually. This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network. Supported switches The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.The?Fibaro Dimmer Bypass 2?(FGB-002)?is a?supplementary?device to the?Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
  • Easy to use and install
  • Supports low power lamps such as LEDs or?energy saving compact fluorescent lamps

WiFi-operated relay switch, 1 channel 16A, with Power Metering

Control and measure power consumption for a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch, with Bluetooth connection
  • Wi-Fi operated - Connects to your Wi-Fi network. No HUB required!
  • Bluetooth - Add devices quick and easy via Bluetooth connection, using Shelly Cloud App
  • Power metering with data storage
  • A wide range of voltages supported
  • Extremely fast processor ? ESP32
  • Enhanced safety ? Overpower, overvoltage and over-temperature protection
  • Enhanced security - MQTT and WSS support, TLS and custom certificates support
  • Improved API interface
  • Onboard scripting features to allow you to automate to your heart's content without any hub required.
The new Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave wireless module which can control two circuits each with a maximum load of 6.5A per channel and 10A total load per circuit.
  • Control the ON-OFF function of two two independent circuits or appliances remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling
  • Latest generation Z-Wave 500 series chip
  • Z-Wave Plus certification
  • Very accurate energy measurement +/- 1 % for power above 5W
  • Supports secure mode (Z-Wave Network Security) encrypted with AES-128
  • No dry contacts - this is important. It means that the new FGS-223 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.

Shelly RGBW2 Smart Home Automation WiFi Solution for any LED strips

Make your LED strips smart in one easy step. Shelly RGBW2 can connect like any LED controller and allows you to control all your lighting directly from a mobile device or tablet.
  • Wireless: No HUB required ? Connect Shelly RGBW2 directly to your Wi-Fi at home.
  • Control remotely: Control the LED lighting at home, no matter where you are. Now you won?t be leaving the lights on and your home won?t welcome you in darkness.
  • Highly compatible: Compatible with Android, iOS, Amazon Alexa and Google Assistant. Control your appliances with your voice.
  • WIDE RANGE OF VOLTAGE SUPPORT: With Shelly RGBW2 you can use White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.
    WEEKLY SCHEDULES: Create custom daily schedules for your lighting to turn on/off or change colour.
  • SUNRISE/SUNSET SCHEDULES: Automatically follow the sun and turn Shelly RGBW2 on/off based on sunrise and sunset hours.
  • COUNTDOWN TIMER: No more forgotten turned on appliances. The integrated countdown timer can automatically switch off your lights after an hour.
  • Colour effects of Shelly RGBW2: Three unique colourful effects that will set the right mood for your party or help you relax at home.

Use it with any LED Strips and bulbs.

  • Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.
This product is approved for use in Australia but must be installed by a licensed electrician.
Content
? Compatible with any Z-Wave Controller.
? Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm
? Power monitoring accuracy P=5-50W, +/-3W; P?50W, +/-3%;
? Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125?C
??Support for the connection of digital temperature sensor (optional part)
? 2 binary inputs offer the option to connect additional devices such as sensors, switches/pushbuttons, etc, ?
Strengthens Z-Wave Connectivity The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you with the flexibility to extend the range of your Z-Wave network. The QUBINO double switch is?Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information. Note! Do not connect the module to loads exceeding recommended values. Connect the module only in accordance with the manual and diagrams below. Use only qualified electricians!

Technical Specification

Product Name?
Z-Wave Dbl Switch
Powered by
24V DC or 240V AC
Operation Range
30m
Max Load
2300W (230VAC)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
-10 -+40 C*
Measured temperature range 0,5o?C (within 0o?C - 40o?C range) (optional sensor)
Temperature measuring accuracy
0,5 C
Housing
ABS
Dimensions (W x H x D)
41.8 x 36.8 x 15.4 mm
The?Fibaro Dimmer Bypass 2?is designed to support?Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw a minimum of 5W (e.g LED lighting). It can be used in the case of connecting LED bulbs or energy-saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of a 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cos?>0.5) Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2. This product must be installed by a qualified electrician. Before engaging an electrician, check that they provide a warranty and electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.

Documentation

Fibaro Z-Wave In-Wall Dimmer 2 Manual Fibaro Z-Wave Dimmer 2 Bypass Manual

Technical Specifications

Application
Indoor use only
Operation temperature
0 ~?35 ?C
Power Consumption
less then 1.2W
Weight
35g
Power Supply
220 - 240 V?~ 50 Hz
Dimensions
(L x W x H) 31mm x?21.6mm x?13mm
Compliance
RoHS 2011/65/EU,?LVD 2006/95/EU, EMC 2004/108

Product Details

The Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene. The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician. This Fibaro Fibaro Z-Wave Double Switch 2 requires 3-wire (including neutral) installation and works with an AC (230V) power supply. The Fibaro Z-Wave Double Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits. This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers - Fibaro Home Center 2/Lite Note: It doesn't integrate with Vera gateways at this stage.

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using Fibaro?s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active or the type of manual switch connected to a Z-Wave light controller. Every available configurable parameter is listed in your device?s user manual. In most cases, your device?s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. Please check the maximum load before installing or operating. This installation must be done by a certified electrician in Australia and New Zealand. Before engaging an electrician, check that they provide an electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.

Documentation

Fibaro Z-Wave Double Switch 2 Manual

Technical Specification

RF Protocol
Z-Wave
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z?Wave device type
Z-Wave Switch, Routing Slave
Power
230V?? 10% 50/60 Hz
Operation Range
Up to 20 m indoors with no obstacles
Application
Indoor use only, up to?1.5kW resistive load per circuit
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Weight
50g
Housing
ABS
Compliance
EN 55015, EN 60669-2-1
Regulatory Compliance Mark
N5496
Dimensions
(LxWxH) 42mm x 37mm x 17mm
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information