SHELLY Plus 1PM

 

$29.99

Availability: In Stock

WiFi-operated relay switch, 1 channel 16A, with Power Metering

Control and measure power consumption for a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch, with Bluetooth connection

  • Wi-Fi operated – Connects to your Wi-Fi network. No HUB required!
  • Bluetooth – Add devices quick and easy via Bluetooth connection, using Shelly Cloud App
  • Power metering with data storage
  • A wide range of voltages supported
  • Extremely fast processor – ESP32
  • Enhanced safety – Overpower, overvoltage and over-temperature protection
  • Enhanced security – MQTT and WSS support, TLS and custom certificates support
  • Improved API interface
  • Onboard scripting features to allow you to automate to your heart’s content without any hub required.

Discount per quantity

Quantity 4 - 7 8+
Price $28.49 $26.99
% Discount 5% 10%

Buy More for Bigger Savings!

50 in stock (can be backordered)

SKU: SH-SHELLY1PM+ Categories: , Tags: ,

Quick Comparison

SettingsSHELLY Plus 1PM removeSHELLY PLUS 1 WiFi Switch removeAEOTEC Nano Dimmer InWall removeSHELLY 1PM WiFi Relay removeAEOTEC WallMote Double removeFIBARO Dimmer Bypass 2 remove
Image
SKUSH-SHELLY1PM+SH-SHELLY1+DHS-LIT-DMW-AEOSH-SHELLY1PMDHS-CON-SCON-AEO-02DHS-LIT-BPASS-FIB-2
Rating
Price$29.99$24.99$89.99$24.99$108.00$19.99
Stock

50 in stock (can be backordered)

50 in stock (can be backordered)

3 in stock

50 in stock

Out of stock

20 in stock

Availability50 in stock (can be backordered)50 in stock (can be backordered)3 in stock50 in stockOut of stock20 in stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Read more

Add to basket

Description

WiFi-operated relay switch, 1 channel 16A, with Power Metering

Control and measure power consumption for a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch, with Bluetooth connection
  • Wi-Fi operated - Connects to your Wi-Fi network. No HUB required!
  • Bluetooth - Add devices quick and easy via Bluetooth connection, using Shelly Cloud App
  • Power metering with data storage
  • A wide range of voltages supported
  • Extremely fast processor – ESP32
  • Enhanced safety – Overpower, overvoltage and over-temperature protection
  • Enhanced security - MQTT and WSS support, TLS and custom certificates support
  • Improved API interface
  • Onboard scripting features to allow you to automate to your heart's content without any hub required.

WiFi-operated relay switch, 1 channel 16A

Control a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere in the world with the smallest WiFi-operated relay switch, with Bluetooth connection!
  • Wi-Fi operated - Connects to your Wi-Fi network. No HUB required!
  • Bluetooth - Add devices quick and easy via Bluetooth connection, using the Shelly Cloud App
  • Dry contacts
  • Low voltage support
  • Extremely fast processor – ESP32
  • Enhanced safety - Over-temperature protection
  • Enhanced security - MQTT and WSS support, TLS and custom certificates support
  • Improved API interface
  • Onboard scripting features to allow you to automate to your heart's content without any hub required.
The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controllers outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside. Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don’t. But perfect lighting has never been easy. Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you’ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you’re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache. No more. Nano Dimmer offers smart, connected lighting without any of the hassles. ZW111e

Shelly 1PM Wifi Module is the smallest, smartest & most powerful WiFi switch for your automation solution

The Relay Switch Shelly 1PM WiFi Module may control 1 electrical circuit up to 3.5 kW. It is intended to be mounted behind power sockets and light switches or other places with limited space. Shelly may work as a standalone device or as an accessory to another home automation controller. The User can register and access Shelly Cloud, using either Android or iOS mobile applications, or any internet browser and the website: https://my.Shelly.cloud/. Mobile App Control - Turn devices on/off directly from your smartphone or tablet. WiFi Connected - Just connect Shelly to your WiFi network and begin the ultimate experience of controlling your home with your phone. Home assistant compatible - Control your appliance with your voice. The Shelly 1 OS is Google Home and Amazon Echo Compatible. Weekly Scheduling - Create custom daily schedules for your devices. Following the Sunlight - 1PM Wifi Module can automatically turn on/off based on the sunrise and sunset hours. Up To 3500W - With Shelly Plug you can control a wide range of devices and appliances.

Shelly for developers

REST API - With the embedded web server and the common HTTP commands Shelly can be made compatible with Vera, Fibaro, SmartThings, HomeSeer, Savant, HomeKit, etc. Visit our REST API for developers, to create your own cloud solution. Support - Shelly has HTTP/UDP support. Visit the Shelly forum for more details.

Shelly Cloud for Shelly 1PM Wifi Module - One App - Unlimited Functionality

Specifications:
  • Power supply: 110-240V ±10% 50/60Hz AC / 24-60V DC
  • Max load: 16A/240V
  • Complies with AU standards
  • Working temperature: – 40°C up to 40°C
  • Radio signal power: 1mW
  • Radio protocol: WiFi 802.11 b/g/n
  • Frequency: 2400 – 2500 MHz
  • Operational range (depending on local construction): up to 50 m outdoors, up to 30 m indoors
  • Dimensions (HxWxL): 41 x 36 x 17 mm
  • Electrical consumption: < 1 W
Note: The device only works on 2.4 GHz WiFi b/g/n. Shelly 1PM has a power measurement function. Shelly 1PM only works with a neutral line. Shelly 1PM has not dry / voltage-free / potential-free contacts. This product is approved for use in Australia but must be installed by a licensed electrician. 
On any wall. WallMote is the wall switch that you can install anywhere. Wirelessly. Whatever the room, whatever the wall, WallMote is perfect. The wireless Z-Wave wall switch that you can place anywhere, on any wall, with as little as double-sided tape. Unpack it. Stick it. Charge it. Control is just a tap away. ZW120a Simple to install. WallMote is the wall switch for anywhere because it is simple to install. Mounting it requires just two steps. Attach the mounting plate. WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done. Attach WallMote. WallMote is attractive. Literally. Place it in front of the mounting plate, and it will magnetically attach.The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
  • Easy to use and install
  • Supports low power lamps such as LEDs or energy saving compact fluorescent lamps
Content

WiFi-operated relay switch, 1 channel 16A

Control a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere in the world with the smallest WiFi-operated relay switch, with Bluetooth connection!
  • Wi-Fi operated - Connects to your Wi-Fi network. No HUB required!
  • Bluetooth - Add devices quick and easy via Bluetooth connection, using the Shelly Cloud App
  • Dry contacts
  • Low voltage support
  • Extremely fast processor – ESP32
  • Enhanced safety - Over-temperature protection
  • Enhanced security - MQTT and WSS support, TLS and custom certificates support
  • Improved API interface
  • Onboard scripting features to allow you to automate to your heart's content without any hub required.

Product Description

Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them. ZW098 B22dd All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch. nano dimmer wiring   PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS: Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using Zellweger equipment or similar onto their distribution networks in order to remotely control devices such as off-peak hot water systems and street lighting, although other areas within Australia also use this technology. Not all properties are affected by ripple control, so just because you might live in one of these areas, does not mean that you will have these problems. Ripple injection control systems work by superimposing coded control signals, commonly 750Hz or 1050Hz on the 50 Hz mains supply. Some electrical appliances such as fans, dimmers, toasters and LED lighting can be sensitive to this ripple control signal. The results could be audible buzzing noises from fans or flickering lights whenever the ripple control signals are present. Electricity suppliers are advising users to install appropriate ripple signal filters in such areas. The ripple signal filter is a tuned passive inline filter that completely eliminates the superimposed ripple injection control signal from the normal mains supply to produce a noise-free filtered mains supply which can then be connected to the electrical appliances or light control systems. The ripple signal filter is specifically tuned to eliminate the ripple control signal frequency of 750Hz or 1050Hz. However, we can’t guarantee the ripple signal filter always will help you if you experiencing such issues. Please contact your local energy provider to get more information and proposed solutions for your electrical installation. If you are getting similar problems with your dimmers and fans and it’s not Ripple Control Signal and you are hearing the tones at random times of the day, your electrical supply may be affected by harmonics; a power fluctuation that is not part of the normal electricity supply or ripple control signal output. Harmonics are caused by interference created by other equipment on the network, such as inverter type air conditioners and switch-mode power supplies for computers. The offending appliances may be in your home or other premises on the local power grid. If you are being affected by network harmonics, it may be of benefit to transfer the electricity supply to your premises to a different phase in the street. This is something you will need to discuss with your electrical company. We are strongly recommending for the areas we have mentioned above to run tests with only a few dimmers before committing for high volumes. If results are not fully OK you may use relays only instead of dimmers. Please note that our warranty for the faulty devices is not covering above-mentioned conditions with your local electric grids. Please see affected with Ripple Signalling areas here: QUEENSLAND
  • Only Southern Queensland (Energex) has Ripple Signalling.
  • The Frequency is 1050Hz.
  • The rest of Queensland (Ergon) does not have Ripple Signalling.
QLD NSW
  • Energy Australia Full Supply Area
  • Energy Australia Sydney &Hunter Supply Area
NSW

Product Support

Works with VeraAeotec LED Bulb with Vera Manuals: ⇒  Aeotec Nano Dimmer product manuals

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Multilevel dimmer
Power
240V AC
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
white
Weight
100g
Housing
ABS
Size
43mm x 40mm x 16mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Shelly 1PM Wifi Module is the smallest, smartest & most powerful WiFi switch for your automation solution

The Relay Switch Shelly 1PM WiFi Module may control 1 electrical circuit up to 3.5 kW. It is intended to be mounted behind power sockets and light switches or other places with limited space. Shelly may work as a standalone device or as an accessory to another home automation controller. The User can register and access Shelly Cloud, using either Android or iOS mobile applications, or any internet browser and the website: https://my.Shelly.cloud/. Mobile App Control - Turn devices on/off directly from your smartphone or tablet. WiFi Connected - Just connect Shelly to your WiFi network and begin the ultimate experience of controlling your home with your phone. Home assistant compatible - Control your appliance with your voice. The Shelly 1 OS is Google Home and Amazon Echo Compatible. Weekly Scheduling - Create custom daily schedules for your devices. Following the Sunlight - 1PM Wifi Module can automatically turn on/off based on the sunrise and sunset hours. Up To 3500W - With Shelly Plug you can control a wide range of devices and appliances.

Shelly for developers

REST API - With the embedded web server and the common HTTP commands Shelly can be made compatible with Vera, Fibaro, SmartThings, HomeSeer, Savant, HomeKit, etc. Visit our REST API for developers, to create your own cloud solution. Support - Shelly has HTTP/UDP support. Visit the Shelly forum for more details.

Shelly Cloud for Shelly 1PM Wifi Module - One App - Unlimited Functionality

Specifications:
  • Power supply: 110-240V ±10% 50/60Hz AC / 24-60V DC
  • Max load: 16A/240V
  • Complies with AU standards
  • Working temperature: – 40°C up to 40°C
  • Radio signal power: 1mW
  • Radio protocol: WiFi 802.11 b/g/n
  • Frequency: 2400 – 2500 MHz
  • Operational range (depending on local construction): up to 50 m outdoors, up to 30 m indoors
  • Dimensions (HxWxL): 41 x 36 x 17 mm
  • Electrical consumption: < 1 W
Note: The device only works on 2.4 GHz WiFi b/g/n. Shelly 1PM has a power measurement function. Shelly 1PM only works with a neutral line. Shelly 1PM has not dry / voltage-free / potential-free contacts. This product is approved for use in Australia but must be installed by a licensed electrician. 

Product Description

Control on tap. Control one Z-Wave device. Control many. And all with a single tap. There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of WallMote’s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between. Tap. Control. ZW120c wallmote mountwallmote engineeringwallmote glass Control a light. Control a room. Control a home.Control a light. Control a room. Control a home. Because WallMote communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top. ZW120b Wireless switch. To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres. Secure switch. Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date. Subtle switch. Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep Simple recharging. Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable. Haptic feedback. It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote’s touch glass. But you will feel the change. WallMote’s haptic engine confirms your every action via a click sensation. Gen5 built in. WallMote and WallMote Quad are part of Aeotec’s Gen5 range of Z-Wave devices. Built upon the latest version of Z-Wave- Z-Wave Plus – cutting-edge performance and security is crafted into Z-Wave’s most advanced battery-powered wall switch.

Product Support

Works with VeraAeotec Door Window Sensor 6 and Vera

Manuals

⇒  Aeotec WallMote product manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Multilevel controller
Power
Rechargeable Lithium-ion
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Color
White
Weight
100g
Housing
ABS
Dimensions
(LxWxH) 72mm x 72mm x 9mm
Compliance
Z-Wave Plus certified
Warranty 12 Months
The Fibaro Dimmer Bypass 2 is designed to support Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw a minimum of 5W (e.g LED lighting). It can be used in the case of connecting LED bulbs or energy-saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of a 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5) Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2. This product must be installed by a qualified electrician. Before engaging an electrician, check that they provide a warranty and electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician.

Documentation

Fibaro Z-Wave In-Wall Dimmer 2 Manual Fibaro Z-Wave Dimmer 2 Bypass Manual

Technical Specifications

Application
Indoor use only
Operation temperature
0 ~ 35 °C
Power Consumption
less then 1.2W
Weight
35g
Power Supply
220 - 240 V ~ 50 Hz
Dimensions
(L x W x H) 31mm x 21.6mm x 13mm
Compliance
RoHS 2011/65/EU, LVD 2006/95/EU, EMC 2004/108
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information