SHELLY RGBW 2 WiFi

$34.99

Availability: In Stock

Shelly RGBW2 Smart Home Automation WiFi Solution for any LED strips

Make your LED strips smart in one easy step. Shelly RGBW2 can connect like any LED controller and allows you to control all your lighting directly from a mobile device or tablet.

  • Wireless: No HUB required ? Connect Shelly RGBW2 directly to your Wi-Fi at home.

  • Control remotely: Control the LED lighting at home, no matter where you are. Now you won?t be leaving the lights on and your home won?t welcome you in darkness.

  • Highly compatible: Compatible with Android, iOS, Amazon Alexa and Google Assistant. Control your appliances with your voice.

  • WIDE RANGE OF VOLTAGE SUPPORT: With Shelly RGBW2 you can use White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.

    WEEKLY SCHEDULES: Create custom daily schedules for your lighting to turn on/off or change colour.

  • SUNRISE/SUNSET SCHEDULES: Automatically follow the sun and turn Shelly RGBW2 on/off based on sunrise and sunset hours.

  • COUNTDOWN TIMER: No more forgotten turned on appliances. The integrated countdown timer can automatically switch off your lights after an hour.

  • Colour effects of Shelly RGBW2: Three unique colourful effects that will set the right mood for your party or help you relax at home.

Use it with any LED Strips and bulbs.

  • Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.

This product is approved for use in Australia but must be installed by a licensed electrician.

Discount per quantity

Quantity 4 - 7 8+
Price $33.24 $31.49
% Discount 5% 10%

Buy More for Bigger Savings!

1 in stock

SKU: SH-SHELLYRGBW2 Categories: , Tags: ,

Quick Comparison

SettingsSHELLY RGBW 2 WiFi removeQUBINO Z-Wave 1D Relay removeQUBINO Z-Wave Dimmer removeAEOTEC Nano Dimmer InWall removeSHELLY PLUS 1 WiFi Switch removeQUBINO Z-Wave Dimmer 0-10V remove
Image
SKUSH-SHELLYRGBW2DHS-LIT-SWW-QUB-01DDHS-LIT-DMW-QUBDHS-LIT-DMW-AEOSH-SHELLY1+DHS-LIT-DMW-QUB-010
Rating
Price$34.99$88.99$79.99$99.99$29.99$88.99
Stock

1 in stock

Out of stock

20 in stock

3 in stock

50 in stock (can be backordered)

10 in stock

Availability1 in stockOut of stock20 in stock3 in stock50 in stock (can be backordered)10 in stock
Add to cart

Add to basket

Read more

Add to basket

Add to basket

Add to basket

Add to basket

Description

Shelly RGBW2 Smart Home Automation WiFi Solution for any LED strips

Make your LED strips smart in one easy step. Shelly RGBW2 can connect like any LED controller and allows you to control all your lighting directly from a mobile device or tablet.
  • Wireless: No HUB required ? Connect Shelly RGBW2 directly to your Wi-Fi at home.
  • Control remotely: Control the LED lighting at home, no matter where you are. Now you won?t be leaving the lights on and your home won?t welcome you in darkness.
  • Highly compatible: Compatible with Android, iOS, Amazon Alexa and Google Assistant. Control your appliances with your voice.
  • WIDE RANGE OF VOLTAGE SUPPORT: With Shelly RGBW2 you can use White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.
    WEEKLY SCHEDULES: Create custom daily schedules for your lighting to turn on/off or change colour.
  • SUNRISE/SUNSET SCHEDULES: Automatically follow the sun and turn Shelly RGBW2 on/off based on sunrise and sunset hours.
  • COUNTDOWN TIMER: No more forgotten turned on appliances. The integrated countdown timer can automatically switch off your lights after an hour.
  • Colour effects of Shelly RGBW2: Three unique colourful effects that will set the right mood for your party or help you relax at home.

Use it with any LED Strips and bulbs.

  • Support any 12v or 24v White, RGB, RGBW led strips and 12/24v led bulbs, with up to 288W combined power.
This product is approved for use in Australia but must be installed by a licensed electrician.
The?QUBINO 1D Relay Plus (by GOAP) is a single channel wireless Z-Wave relay with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve the range and stability of your Z-wave network. The module can be controlled either through the Z-wave network or through the wall switch manually. This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network. Supported switches The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.  The?QUBINO Dimmer?(by GOAP) is the first MOSFET- switching light Z-Wave dimmer module that also supports control of low-voltage halogen lamps with electronic transformers, dimmable compact fluorescent lights and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor. QUBINO?modules are ?install-and-forget? products. Our products are made to last, so we only select and use top-quality electronic components. These modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controllers outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you?ll be amazed at just how much functionality we were able to craft inside. Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don?t. But perfect lighting has never been easy. Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you?ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you?re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache. No more. Nano Dimmer offers smart, connected lighting without any of the hassles. ZW111e

WiFi-operated relay switch, 1 channel 16A

Control a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere in the world with the smallest WiFi-operated relay switch, with Bluetooth connection!
  • Wi-Fi operated - Connects to your Wi-Fi network. No HUB required!
  • Bluetooth - Add devices quick and easy via Bluetooth connection, using the Shelly Cloud App
  • Dry contacts
  • Low voltage support
  • Extremely fast processor ? ESP32
  • Enhanced safety - Over-temperature protection
  • Enhanced security - MQTT and WSS support, TLS and custom certificates support
  • Improved API interface
  • Onboard scripting features to allow you to automate to your heart's content without any hub required.
The absolute best selling?QUBINO Z-Wave Dimmer 0-10V?(by GOAP) is unique. This Z-Wave product was developed to cater for the needs of Smart Home users looking for a Z-Wave solution that controls devices such as lights, fans and similar products with a 0-10V signal.?The QUBINO Flush Dimmer 0-10V is ideal for remotely dimming LED lights with low voltage ballast. QUBINO?modules are ?install-and-forget? products. QUBINO are made to last, so we only select and use top-quality electronic components. These modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard. QUBINO Ltd. is a European company with 26-years experience in the automation field. With their expertise and passion for innovation in automation, they have developed a unique, ready to sell, certified and reliable portfolio of 14 Z-Wave wireless Smart Home products under different brands and OEMs around the world.
Content
? Compatible with any Z-Wave Controller.
? Dimensions (W x H x D) 41.8 x 36.8 x 15.4 mm
? Power monitoring accuracy P=5-50W, +/-3W; P?50W, +/-3%;
? Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125?C
??Support for the connection of digital temperature sensor (optional part)
? 2 binary inputs offer the option to connect additional devices such as sensors, switches/pushbuttons, etc, ?

Product Support

On/Off Flush Relay Switch with dry contacts?capable of operating a load of up to 10A. Dry (Voltage-free) Contacts Requires 3-wire (including neutral) installation - further information is in our 2-wire/3-wire guide Works with AC or DC power supply (110-230V AC or 24-30V DC). Extra switch inputs for controlling additional associated devices or 2-way installations (see note) Extra Features The QUBINO Flush 1D Relay includes extra features to make it even more useful in your home automation system. Temperature Sensor Using an optional temperature sensor, the QUBINO Relay can report the temperature to your system - you can use this to control heating, blinds and ventilation systems. Binary Switch and Sensor Input The Relay can be used with up to three external switches enabling it to control other Z-Wave devices by Association or Trigger Scenes in the main controller. Strengthens Z-Wave Connectivity The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network. The QUBINO Flush 1D Relay Plus is?Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information.

Technical Specification

Product Name?
?Flush 1 relay
Powered by
24V DC or 240V AC
Operation Range
30m
Max Load
2300W (230VAC)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
-10 -+40 C*
Measured temperature range 0,50 C (within 0o?C - 40o?C range) (optional sensor)
Temperature measuring accuracy
0,5 C
Housing
ABS
Dimensions (W x H x D)
41.8 x 36.8 x 15.4 mm
All QUBINO modules are manufactured in Europe by GOAP.
  • The QUBINO Z-Wave Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.
  • The QUBINO Z-Wave?Dimmer can measure the power consumption of the connected electrical device and itself has an extremely low power consumption of just 0.7 W.
  • The QUBINO Z-Wave?Dimmer can operate across a wide temperature range, from a chilly -10?C to a scorching 40?C (14??104?F). It supports the connection of a digital temperature sensor, which is also useful for creating complex scenarios. Every module also acts as a repeater in order to improve the range and stability of the Z-Wave network.
  • Unlimited controlling capability through a gateway
  • Setting mono-stable (push button) or bi-stable switch type
  • Z-Wave Plus compliant
  • 23 additional parameters for expert users

Product Support

Please note:?If you are installing the entire Z-Wave? system for the first time, please refer to?the installation guide of your Z-Wave gateway before installing this device. The QUBINO Flush Dimmer uses a unique MOSFET 'trailing edge' dimmer to enable it to work with a huge range of bulb types: Halogen and Incandescent (230V) Dimmable LEDs (230V) Dimmable CFL and Fluorescent (230V) Low Voltage Halogen (24V) Low Voltage LED (24V) The QUBINO Dimmer can be used in the 230V mains lighting system where it uses a 'Trailing Edge' style dimmer to control the lights. It can also be used in a 24V low-voltage system where it uses PWM style control of the bulbs. Please note: These devices require a 3-wire system (including neutral), please check your installation before purchasing. If you have a 2-wire system (without neutral) we recommend you use a FIBARO Z-Wave Dimmer 2 PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS: Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using Zellweger equipment?or similar onto their distribution networks in order to remotely control devices such as off-peak hot water systems and street lighting, although other areas within Australia also use this technology. Not all properties are affected by ripple control, so just because you might live in one of these areas, does not mean that you will have these problems. Ripple injection control systems work by superimposing coded control signals, commonly 750Hz or 1050Hz on the 50 Hz mains supply. Some electrical appliances such as fans, dimmers, toasters and LED lighting can be sensitive to this ripple control signal. The results could be audible buzzing noises from fans or flickering lights whenever the ripple control signals are present. Electricity suppliers are advising users to install appropriate?ripple signal filters in such areas. The ripple signal filter is a tuned passive inline filter that completely eliminates the superimposed ripple injection control signal from the normal mains supply to produce a noise-free filtered mains supply which can then be connected to the electrical appliances or light control systems. The ripple signal filter is specifically tuned to eliminate the ripple control signal frequency of 750Hz or 1050Hz. However, we can?t guarantee the ripple signal filter always will help you if you experiencing such issues. Please contact your local energy provider to get more information and proposed solutions for your electrical installation. If you are getting similar problems with your dimmers and fans and it?s not Ripple Control Signal and you are hearing the tones at random times of the day, your electrical supply may be affected by harmonics; a power fluctuation that is not part of the normal electricity supply or ripple control signal output. Harmonics are caused by an interference created by other equipment on the network, such as inverter type air conditioners and switch-mode power supplies for computers. The offending appliances may be in your home or other premises on the local power grid. If you are being affected by network harmonics, it may be of benefit to transfer the electricity supply to your premises to a different phase in the street. This is something you will need to discuss with your electrical company. We are strongly recommending for the areas we have mentioned above to run tests with only a few dimmers before committing for high volumes. If results are not fully OK you may use relays only instead of dimmers. Please note that our warranty for the faulty devices is not covering the above-mentioned conditions with your local electric grids. Please see affected with Ripple Signalling areas here: QUEENSLAND
  • Only Southern Queensland (Energex) has Ripple Signalling.
  • The Frequency is 1050Hz.
  • The rest of Queensland (Ergon) does not have Ripple Signalling.
QLD NSW
  • Energy Australia Full Supply Area
  • Energy Australia Sydney &Hunter Supply Area
NSW

Product Description

Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them. ZW098 B22dd All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch. nano dimmer wiring   PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS: Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using Zellweger equipment?or similar onto their distribution networks in order to remotely control devices such as off-peak hot water systems and street lighting, although other areas within Australia also use this technology. Not all properties are affected by ripple control, so just because you might live in one of these areas, does not mean that you will have these problems. Ripple injection control systems work by superimposing coded control signals, commonly 750Hz or 1050Hz on the 50 Hz mains supply. Some electrical appliances such as fans, dimmers, toasters and LED lighting can be sensitive to this ripple control signal. The results could be audible buzzing noises from fans or flickering lights whenever the ripple control signals are present. Electricity suppliers are advising users to install appropriate?ripple signal filters in such areas. The ripple signal filter is a tuned passive inline filter that completely eliminates the superimposed ripple injection control signal from the normal mains supply to produce a noise-free filtered mains supply which can then be connected to the electrical appliances or light control systems. The ripple signal filter is specifically tuned to eliminate the ripple control signal frequency of 750Hz or 1050Hz. However, we can?t guarantee the ripple signal filter always will help you if you experiencing such issues. Please contact your local energy provider to get more information and proposed solutions for your electrical installation. If you are getting similar problems with your dimmers and fans and it?s not Ripple Control Signal and you are hearing the tones at random times of the day, your electrical supply may be affected by harmonics; a power fluctuation that is not part of the normal electricity supply or ripple control signal output. Harmonics are caused by interference created by other equipment on the network, such as inverter type air conditioners and switch-mode power supplies for computers. The offending appliances may be in your home or other premises on the local power grid. If you are being affected by network harmonics, it may be of benefit to transfer the electricity supply to your premises to a different phase in the street. This is something you will need to discuss with your electrical company. We are strongly recommending for the areas we have mentioned above to run tests with only a few dimmers before committing for high volumes. If results are not fully OK you may use relays only instead of dimmers. Please note that our warranty for the faulty devices is not covering above-mentioned conditions with your local electric grids. Please see affected with Ripple Signalling areas here: QUEENSLAND
  • Only Southern Queensland (Energex) has Ripple Signalling.
  • The Frequency is 1050Hz.
  • The rest of Queensland (Ergon) does not have Ripple Signalling.
QLD NSW
  • Energy Australia Full Supply Area
  • Energy Australia Sydney &Hunter Supply Area
NSW

Product Support

Works with VeraAeotec LED Bulb with Vera Manuals: ?? Aeotec Nano Dimmer product manuals

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Multilevel dimmer
Power
240V AC
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
white
Weight
100g
Housing
ABS
Size
43mm x 40mm x 16mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

WiFi-operated relay switch, 1 channel 16A

Control a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere in the world with the smallest WiFi-operated relay switch, with Bluetooth connection!
  • Wi-Fi operated - Connects to your Wi-Fi network. No HUB required!
  • Bluetooth - Add devices quick and easy via Bluetooth connection, using the Shelly Cloud App
  • Dry contacts
  • Low voltage support
  • Extremely fast processor ? ESP32
  • Enhanced safety - Over-temperature protection
  • Enhanced security - MQTT and WSS support, TLS and custom certificates support
  • Improved API interface
  • Onboard scripting features to allow you to automate to your heart's content without any hub required.
All?QUBINO?modules are manufactured in Italy.
  • The?QUBINO?Z-Wave Dimmer 0-10V occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box
  • Standard 0-10V output
  • Multi-function input in connection with: push button / switch / potentiometer / input 0-10V (any sensor with 0-10V output)
  • Perfect for dimming lights with ballast 0-10V
  • Controlling fan speed (for motors or frequency inverters with 0-10V speed control input)
  • Controlling heating / cooling valves (with 0-10V input)
  • Unlimited controlling capability through a gateway
  • Z-Wave Plus compliant
  • 23 additional parameters for expert users

Product Support

Please note:?If you are installing the entire Z-Wave? system for the first time, please refer to?the installation guide of your Z-Wave gateway before installing this device. The GOAP Flush Dimmer uses a unique MOSFET 'trailing edge' dimmer to enable it to work with a huge range of bulb types: Halogen and Incandescent (230V) Dimmable LEDs (230V) Dimmable CFL and Fluorescent (230V) Low Voltage Halogen (24V) Low Voltage LED (24V) The QUBINO Z-Wave Dimmer can be used in the 230V mains lighting system where it uses a 'Trailing Edge' style dimmer to control the lights. It can also be used in a 24V low-voltage system where it uses PWM style control of the bulbs. Please note: These devices require a 3-wire system (including neutral), please check your installation before purchasing. If you have a 2-wire system (without neutral) we recommend you use a FIBARO Z-Wave Dimmer 2.

Technical Specification

RF Protocol
Z-Wave Plus?, SDK version: 6.51.03
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Application
Indoor use only
Power
12-24 VDC
Operation Range
Up to 50m indoors with no obstacles
Enclosure
Plastic
Compliance
EN 60669-2-1
Operating Temp. ?-10C ~ +50C
Max. control voltage ratings
-20/+20VDC
Control signal range
0-11VDC
Max. sinking current
2 mA
Max. sourcing current
10 mA
Dimensions
41.8 mm x 36.8 mm x 15.4 mm
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information