The?Z-Wave Smart Valve Actuator?allows you to remotely turn ON/OFF a water valve using Z-Wave Controller. You can use it to automate your water boiler, irrigation system, radiant heat system or anything else that uses a quarter-turn ball valve.
The?Z-Wave Smart Valve Actuator installs on top of your existing water valve with a single Phillips screwdriver. No plumber is necessary!
Use this device alongside a?Z-Wave Water Sensor?to automatically close your water valve when a leak is detected to greatly decrease the extent of water damage. Sleep easy knowing that your home is safe from water damage even when you are on vacation.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controllers including:
The?Z-Wave Smart Valve Actuator?allows you to remotely turn ON/OFF a water valve using Z-Wave wireless protocol (921.42 MHz in Australia) and?Z-Wave Gateway.
700 series Z-Wave chip?which is the newest technology from Silicon Labs.
Great wireless range.
700 series Z-Wave chip?provides?the best platform for wirelessly connected devices. With a wireless range above 100 meters, Z-Wave devices can now communicate 250% further using significantly less power.
Faster control.
Z-Wave is all about control and automation.?700 series?does it fast. An 18% more powerful CPU is coupled with wireless transfers reaching 100 kbit/s and instantaneous security.?700 series Z-Wave?chip performing much faster than all competitors.
It?s easily installed over existing valves without needing a plumber. All you need is a screwdriver, to take control of your own plumbing.
It ensures that you never have to deal with burst pipes or leaks that not only spoil your day but damage your home. The?Z-Wave Smart Valve Actuator?can not only automate your water main house feed or anything else that uses a quarter-turn ball valve, but it can also turn off your water automatically when leaks are detected or when you travel out of town.
Works on quarter-turn ball valves up to 1-1/2″
Z-Wave Chip 700
Installs on top of your existing water valve (no plumber necessary)
The?Z-Wave Smart Valve Actuator?allows you to remotely turn ON/OFF a water valve using Z-Wave Controller. You can use it to automate your water boiler, irrigation system, radiant heat system or anything else that uses a quarter-turn ball valve.
The?Z-Wave Smart Valve Actuator installs on top of your existing water valve with a single Phillips screwdriver. No plumber is necessary!
Use this device alongside a?Z-Wave Water Sensor?to automatically close your water valve when a leak is detected to greatly decrease the extent of water damage. Sleep easy knowing that your home is safe from water damage even when you are on vacation.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controllers including:
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colours (white, black, red, blue, yellow)
The?FAKRO Z-Wave W/Chain Winder 12V?is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate. The European engineered, manufactured and certified FAKRO Z-Wave Chain Winder is the perfect solution to inaccessible windows and centralised managed buildings with automated natural ventilation.
Program in conjunction with the?FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
Remote control functionality for ease of use
Overload protection
Easily programmable to communicate with compatible Z-Wave gateways
Automatic switch-off once fully extended
The?FAKRO Z-Wave? ZWMP Weather Module?is the primary component for monitoring outside weather conditions, along with offering compatibility with a variety of Z-Wave? home automation gateways. When installed in conjunction with the FAKRO ZRD Rain Sensor and FAKRO ZWD Wind Sensor, they can automatically close windows upon detecting wind or rainfall.
Easy to install and include into your existing Z-Wave? network setup
Compatible with the FAKRO ZRD Rain Sensor, FAKRO ZWD Wind Sensor, Thermostat and other external devices
Automatically sends closure requests to electronic shutters, windows and skylights upon detecting rain or wind
Can work as a Primary or Secondary controller
Easily programmable to communicate with compatible Z-Wave gateways
The Aeotec Z-Stick (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices.
Content
Product Description
The?Z-Wave Smart Valve Actuator?allows you to remotely turn ON/OFF a water valve using Z-Wave wireless protocol (921.42 MHz in Australia) and?Z-Wave Gateway.
700 series Z-Wave chip?which is the newest technology from Silicon Labs.
Great wireless range.700 series Z-Wave chip?provides?the best platform for wirelessly connected devices. With a wireless range above 100 meters, Z-Wave devices can now communicate 250% further using significantly less power.
Faster control.
Z-Wave is all about control and automation.?700 series?does it fast. An 18% more powerful CPU is coupled with wireless transfers reaching 100 kbit/s and instantaneous security.?700 series Z-Wave?chip performing much faster than all competitors.
It?s easily installed over existing valves without needing a plumber. All you need is a screwdriver, to take control of your own plumbing.
It ensures that you never have to deal with burst pipes or leaks that not only spoil your day but damage your home. The?Z-Wave Smart Valve Actuator?can not only automate your water main house feed or anything else that uses a quarter-turn ball valve, but it can also turn off your water automatically when leaks are detected or when you travel out of town.
Works on quarter-turn ball valves up to 1-1/2"
Z-Wave Chip 700
Installs on top of your existing water valve (no plumber necessary)
Z-Wave Plus certified
Built-in Z-Wave Range Extender
Single tool installation
Technical Specification
RF Protocol
Z-Wave Plus (700 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z?Wave device type
Z-Wave Switch
Power
12 VDC
Power Consumption
0.13W
Operation Range
Up to 100m indoors (with 700 Controller)
Application
Indoor use only or undercover
Mounting Options
Quarter-Turn Valves from 1/2" to 1-1/2"
Operation Temperature
5 ~ 40 ?C
Storage temperature
-10 ~ 50 ?C
Weight
1.3kg
Dimensions
15mm x 89mm x 188mm
Housing
ABS
Product Details
Compatible with any Z-Wave controller.
Detects motion using a passive IR sensor.
Measures the temperature.
Measures the light intensity.
Easy installation on a wall or any surface.
Protected against tampering and theft - once vibrations are detected, the notification is sent to the main controller.
Alarms of movement and temperature are signalled by LED diode blinking.
Simple earthquake detector mode.
Technical Specifications
Product Name?
FIBARO MOTION SENSOR FGMS-001 V2.4
Battery Type
CR123A battery, 3.6 VDC
Operation Range
30m
Light Intensity Measuring Range:
0-32000 LUX
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
0 - 50C*
Measured temperature range
-20 to 100C
Temperature measuring accuracy
0,5 C
Housing
ABS
Size?(Diameter)
44 mm
Product Details
The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.
Technical Specifications
RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Power
ER14250 ? AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Storage temperature
?10 ~ 50 ?C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
Product Description
For the most convenient use of your motorized window system, the FAKRO Z-Wave Chain Winder allows for remote accessibility anywhere around the home. Featuring an intuitive button prompt command process, this Z-Wave Chain Winder can easily be included in any existing Z-Wave system.
From skylights, awnings, tilted fixtures to bottom-hung/top-hung windows, the Chain Winder can be installed into many common window fittings. For the best results and consideration for your safety, always rely on a qualified electrician to install the Z-Wave Chain Winder device for you. The Chain Winder interacts with other Z-Wave products through a two-way radio communication system, which allows for uninterrupted operation on a consistent basis. The catch holder comfortably connects to the actuator chain for a strong and durable fitting, while the programming and manual operation buttons allow for easy inclusion with other Z-Wave devices.
Installation options:
1 Skylight or awning ? fixed mounting (inside the frame)
2 Skylight or awning ? with angle brackets (inside the frame)
3 Tilt or awning window ? fixed mounting (sash mounted)
4 Tilt or awning window ? with angle brackets (sash mounted)
Providing a central unit for monitoring changing weather conditions, the?FAKRO Z-Wave ZWMP Weather Module?takes full advantage of the Z-Wave? system to allow for seamless inclusion into the home environment.
Including the ZWMP Weather Module into the Z-Wave system is simply using your Z-Wave Controller, in order for the device to be recognized. From there, each individual shutter/window or skylight installation can be programmed to interact with the ZWMP Weather Module, which will allow it to respond to changing weather conditions. The ZWMP Weather Module contains three digital inputs, which allows various external devices to be plugged in (ie. Rain and wind sensors, time switch, thermostat etc). With a working range of up to 40 meters, the ZWMP Weather Module can seamlessly interact with other Z-Wave devices around the household.
This product is compatible with:
Create your own Z-Wave gateway. With Z-Stick Gen5 you?ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. You?ll benefit from a system that is locally hosted and cloud-free, whose features, security and privacy you can personally control, and you?ll be able to create your Z-Wave network at your own pace and within your own budget. Capable of controlling up to 232 different Z-Wave devices, including those that use the more advanced Z-Wave Plus, and able to run on both full-powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with open source software such as Domoticz, Home Assistant, OpenHab, and OpenHab2 and also works with commercially available software such as Axial Control, Homeseer, Indigo for MacOS. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.
Product Support
Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.
Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices.
Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wireless firmware upgrades. Compatible with Z-Wave enabled home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2.
No software included.
Manuals:? Aeotec Z-Stick Gen5p product manual
