When installed in conjunction with the FAKRO ZWMP Weather Module, the FAKRO ZWD Wind Sensor is a convenient device that’s designed to detect extreme wind changes. When mounted on a rooftop area, it can record wind speeds and notify any Z-Wave compatible windows to close upon reaching high speeds.
Easy-to-install in conjunction with the FAKRO ZWMP Weather Module
Automatically detects wind speeds
Closes Z-Wave compatible windows upon detecting a certain wind speed threshold (40kmph)
When unpredictable weather changes occur, the FAKRO ZWD Wind Sensor system can automatically close windows to protect your home. When installed with the FAKRO Z-Wave ZWMP Weather Module, the Wind Sensor can be used to detect wind speeds and communicate with any Z-Wave compliant window installations when the wind threshold of 40km/h has been reached. Upon detecting high levels of wind (above 40 km/h), the Wind Sensor will communicate via radio frequency and close any associated motorized windows around the home. Through smart inclusion with your home’s existing Z-Wave Network, the Wind Sensor can easily be installed alongside other automated devices in order to work together.
Simply mount the FAKRO ZWD Wind Sensor on a suitable rooftop area and connect it (wired) to the FAKRO ZWMP Weather Module, which will allow all allocated windows to directly communicate with the Weather Module and Wind Sensor.
When installed in conjunction with the FAKRO ZWMP Weather Module, the FAKRO ZWD Wind Sensor is a convenient device that’s designed to detect extreme wind changes. When mounted on a rooftop area, it can record wind speeds and notify any Z-Wave compatible windows to close upon reaching high speeds.
Easy-to-install in conjunction with the FAKRO ZWMP Weather Module
Automatically detects wind speeds
Closes Z-Wave compatible windows upon detecting a certain wind speed threshold (40kmph)
The DOME Z-Wave Water Sensor is a compact, battery powered water leak sensor. Dome Leak Sensor now officially works with Vera and Wink Z-Wave Gateways! The Dome Home Automation Wireless Z-Wave Leak Sensor with Remote Probe helps you cap leaks before they turn into gushes, so you can keep a lid on the amount of money you spend on water-related repairs. Use this battery-powered, smart-home leak detector anywhere you need to monitor water lines for potential problems. Its low-profile design allows you to hook it up underneath appliances and a 4-foot range remote sensor probe makes it easier to monitor water activity in hard-to-reach places like sump pumps. Toilets, refrigerators, water heaters, and other appliances and fixtures that require water lines can generate costly bills from ongoing small leaks and unexpected major breaks. The Dome Home Automation Water Resistant Leak Sensor keeps you up to date on the health of water lines leading in and out of these systems, and it sends you customized alerts via your connected Z-Wave Hub. Shut off main valves and take action when required. Use with most any Z-Wave Hub including: Vera, Wink, Fibaro HC2, Home Seer, SmartThings, Harmony and more (subject to local RF availability) .
Built-in buzzer to alert those nearby
Includes remote sensor probe for tight spaces
Z-Wave Plus certified
Water resistant
The QUBINO Z-Wave Tubular Motor Controller DC (by GOAP) is the world's smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds.
Z-Wave Plus certified
Supports the connection of a temperature sensor
Can measure the power consumption of connected device
The FAKRO Z-Wave W/Chain Winder 12V is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate. The European engineered, manufactured and certified FAKRO Z-Wave Chain Winder is the perfect solution to inaccessible windows and centralised managed buildings with automated natural ventilation.
Program in conjunction with the FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
Remote control functionality for ease of use
Overload protection
Easily programmable to communicate with compatible Z-Wave gateways
Automatic switch-off once fully extended
The new FIBARO Double Smart Module(FGS-224) is a smart Z-Wave wireless module that can control two circuits each with a maximum load of 6A per channel and 9.5A total load per circuit.
Control the ON-OFF function of two independent circuits or appliances remotely or using a wall switch
Can be used as voltage free relays (dry contacts)
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
Latest generation Z-Wave 500 series chip
Z-Wave Plus certification
Very accurate energy measurement +/- 1 % for power above 5W
Supports secure mode (Z-Wave Network Security) encrypted with AES-128
Dry contacts - this is important. It means that the new FGS-224 can be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
The QUBINO Z-Wave Tubular Motor Controller (by GOAP) is the world's smallest Z-Wave module able to control the motors of blinds, rollers, shades and Venetian blinds.
Z-Wave Plus certified
Supports the connection of a temperature sensor
Requires 3-wire (including neutral) installation
Can measure the power consumption of connected device
Content
Product Description
When unpredictable weather changes occur, the FAKRO ZWD Wind Sensor system can automatically close windows to protect your home. When installed with the FAKRO Z-Wave ZWMP Weather Module, the Wind Sensor can be used to detect wind speeds and communicate with any Z-Wave compliant window installations when the wind threshold of 40km/h has been reached. Upon detecting high levels of wind (above 40 km/h), the Wind Sensor will communicate via radio frequency and close any associated motorized windows around the home. Through smart inclusion with your home’s existing Z-Wave Network, the Wind Sensor can easily be installed alongside other automated devices in order to work together.
Simply mount the FAKRO ZWD Wind Sensor on a suitable rooftop area and connect it (wired) to the FAKRO ZWMP Weather Module, which will allow all allocated windows to directly communicate with the Weather Module and Wind Sensor.
Technical Specification
Dimentions
80mm x 85 mm
Power cord
2 x 0.25 mm2 (5 m included)
The DOME Z-Wave Water Sensor is a Z-Wave Plus (500 series) compatible water sensor with a remote sensor probe for tight spaces. Simply place the device in a leak prone area and receive a notification from your Z-Wave network when a leak is detected allowing you to respond and prevent large scale water damage.
Know when the sump pump fills up, BEFORE it overflows. Dangle the remote sensor probe in the tank to receive a notification and hear an alarm if the water level rises higher than it should.
Use this device alongside a DOME Wireless Water Valve to automatically close your water valve when a leak is detected to greatly decrease the extent of water damage. Sleep easy knowing that your home is safe from water damage even when you are on vacation.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controllers including:
The QUBINO Z-Wave Tubular Motor Controller DC is a Z-Wave Plus (500 series) controller for blind, roller and shade motors with 12-24V DC motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.
The QUBINO Z-Wave Tubular Motor Controller DC allows the connection of a temperature sensor that can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.
This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;
Output circuit power of DC output (resistive load)
48W (24V DC)
Operation Range
Up to 30m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
10 ~ 40 °C
Storage temperature
-10 ~ 60 °C
Weight
30g
Dimensions
41.8mm x 36.8mm x 16.9mm
Product Description
For the most convenient use of your motorized window system, the FAKRO Z-Wave Chain Winder allows for remote accessibility anywhere around the home. Featuring an intuitive button prompt command process, this Z-Wave Chain Winder can easily be included in any existing Z-Wave system.
From skylights, awnings, tilted fixtures to bottom-hung/top-hung windows, the Chain Winder can be installed into many common window fittings. For the best results and consideration for your safety, always rely on a qualified electrician to install the Z-Wave Chain Winder device for you. The Chain Winder interacts with other Z-Wave products through a two-way radio communication system, which allows for uninterrupted operation on a consistent basis. The catch holder comfortably connects to the actuator chain for a strong and durable fitting, while the programming and manual operation buttons allow for easy inclusion with other Z-Wave devices.
Installation options:
1 Skylight or awning – fixed mounting (inside the frame)
2 Skylight or awning – with angle brackets (inside the frame)
3 Tilt or awning window – fixed mounting (sash mounted)
4 Tilt or awning window – with angle brackets (sash mounted)
The FIBARO Double Smart Module(FGS-224) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This FIBARO Double Smart Module (FGS-224) requires 3-wire (including neutral) installation and works with an AC (230V) power supply.
The FIBARO Double Smart Module (FGS-224) also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers - Fibaro Home Center 3/2/Lite
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using Fibaro’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device.
Please check the maximum load before installing or operating. This installation must be done by a certified electrician in Australia and New Zealand.Before engaging an electrician, check that they provide an electrical compliance certificate.For a warranty claim, you have to provide an installation compliance certificate from your electrician.
Indoor use only, up to 1.5kW resistive load per circuit
6A per one channel, 9.5A total
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Weight
50g
Housing
ABS
Compliance
EN 55015, EN 60669-2-1
Regulatory Compliance Mark
N5496
Dimensions
(LxWxH) 42mm x 37mm x 17mm
The QUBINO Z-Wave Tubular Motor Controller is a Z-Wave Plus (500 series) controller for blind, roller and shade motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.
The QUBINO Z-Wave Tubular Motor Controller allows the connection of a temperature sensor that can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.
This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;
