The?FAKRO Z-Wave W/Chain Winder 12V?is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate. The European engineered, manufactured and certified FAKRO Z-Wave Chain Winder is the perfect solution to inaccessible windows and centralised managed buildings with automated natural ventilation.
Program in conjunction with the?FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
Remote control functionality for ease of use
Overload protection
Easily programmable to communicate with compatible Z-Wave gateways
For the most convenient use of your motorized window system, the FAKRO Z-Wave Chain Winder allows for remote accessibility anywhere around the home. Featuring an intuitive button prompt command process, this Z-Wave Chain Winder can easily be included in any existing Z-Wave system.
From skylights, awnings, tilted fixtures to bottom-hung/top-hung windows, the Chain Winder can be installed into many common window fittings. For the best results and consideration for your safety, always rely on a qualified electrician to install the Z-Wave Chain Winder device for you. The Chain Winder interacts with other Z-Wave products through a two-way radio communication system, which allows for uninterrupted operation on a consistent basis. The catch holder comfortably connects to the actuator chain for a strong and durable fitting, while the programming and manual operation buttons allow for easy inclusion with other Z-Wave devices.
Installation options:
1 Skylight or awning ? fixed mounting (inside the frame)
2 Skylight or awning ? with angle brackets (inside the frame)
3 Tilt or awning window ? fixed mounting (sash mounted)
4 Tilt or awning window ? with angle brackets (sash mounted)
The?FAKRO Z-Wave W/Chain Winder 12V?is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate. The European engineered, manufactured and certified FAKRO Z-Wave Chain Winder is the perfect solution to inaccessible windows and centralised managed buildings with automated natural ventilation.
Program in conjunction with the?FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
Remote control functionality for ease of use
Overload protection
Easily programmable to communicate with compatible Z-Wave gateways
Automatic switch-off once fully extended
This new Fibaro home controller offers impressive hardware and integration options for installers and clients. This excellent Smart Home controller offers next generation hardware, including:
COMMUNICATION TECHNOLOGY: Z-WAVE (700 series)
NETWORK TECHNOLOGY: Wi-Fi 2.4GHz
CPU: Single-Core ARM Cortex A7 900 MHz
RAM MEMORY: 512 MB
FLASH MEMORY: 4 GB eMMC
The Fibaro Home Center 3 Lite is the perfect controller for small Home Automation projects, offering an excellent solution for smaller homes or apartments. The system is recommended for Smart Homes with up to 40 Z-Wave devices and 20 scenes. But, don't be mistaken by its size, the Fibaro HC3 Lite offers an affordable solution without having to compromise on quality. With this new system, you'll be able to automate a variety of solutions, including:
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication.
You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller.
It can also control devices by opening/closing output contacts independently of the inputs.
The?QUBINO Double Switch (by GOAP) is a Z-Wave module for switching on/off one or two electrical devices (e.g. light, fan, etc ...). The module can be controlled either through the Z-wave network or through the wall switch manually.
This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.
Supported switches
The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.
The?FAKRO Z-Wave? ZWK10 Wall Controller??is a wall mounted multi-purpose remote that?s capable of operating up to 10 different FAKRO and Z-Wave? devices. For the simplest solution to managing your range of Z-Wave? and FAKRO devices, the?FAKRO Z-Wave ZWK10 Wall Controller has everything you need.
Easy to install and include into your existing Z-Wave? network setup
Integrates easily and operate FAKRO window openers as well as other Z-Wave? devices
Manage and operate multiple devices using just one controller
Home Center 3 is the latest smart home management controller from Fibaro Group. Advanced technology within its components guarantees the highest stability and performance of the FIBARO System.
PRODUCT HIGHLIGHTS
Cutting-edge speed & stability,
4x1,2GHz processor, 2 GB RAM of memory,
Seamless integration with over 2000 third-party products operating in various technologies,
Fast configuration process,
Simple and complex automations, like Block Scenes, LUA events, Quick Apps,
Unquestionable, triple data security system,
Future-proof - lasts for years, maintaining top performance,
Ingenious and refined design.
Content
Product Description
For the most convenient use of your motorized window system, the FAKRO Z-Wave Chain Winder allows for remote accessibility anywhere around the home. Featuring an intuitive button prompt command process, this Z-Wave Chain Winder can easily be included in any existing Z-Wave system.
From skylights, awnings, tilted fixtures to bottom-hung/top-hung windows, the Chain Winder can be installed into many common window fittings. For the best results and consideration for your safety, always rely on a qualified electrician to install the Z-Wave Chain Winder device for you. The Chain Winder interacts with other Z-Wave products through a two-way radio communication system, which allows for uninterrupted operation on a consistent basis. The catch holder comfortably connects to the actuator chain for a strong and durable fitting, while the programming and manual operation buttons allow for easy inclusion with other Z-Wave devices.
Installation options:
1 Skylight or awning ? fixed mounting (inside the frame)
2 Skylight or awning ? with angle brackets (inside the frame)
3 Tilt or awning window ? fixed mounting (sash mounted)
4 Tilt or awning window ? with angle brackets (sash mounted)
Smaller houses (recommended up to 100 m2) and apartments
Number of Supported Devices
Recommended up to 40 Z-Wave devices
Communication Technologies
Z-Wave 700
Network Technologies
Wi-Fi 2.4GHz
CPU
Single-Core ARM Cortex A7 900 MHz
RAM
512MB
Flash Memory
4 GB eMMC
Possibilities of Automation
LUA, block scenes, panels, schedules
Maximum number of scenes
Recommended up to 20 scenes
IP Cameras Support
1 IP camera
Plugins and Quick Apps Support
5 plugins and 10 quick apps
Migration Mechanism
No
Operating in Connected Gateways Mode
Only SLAVE mode
Product Description
Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption.
Works as a Z-Wave signal repeater.
Allows for connecting sensors:
6 DS18B20 sensors,
1 DHT sensor,
2 2-wire analog sensor,
2 3-wire analog sensor,
2 binary sensors.
Built-in temperature sensor.
This product works with :
Fibaro Home Controller 3/2/Lite
Please note:
THE DEVICE IS NOT COMPATIBLE WITH VERA HOME CONTROLLERSBefore installation
Connect only in accordance with one of the diagrams,
The device is powered with secure voltage; nevertheless, the user should be extra careful or should commission the installation to a qualified person,
Do not connect devices that are not compliant with the specification,
Do not connect other sensors than DS18B20 or DHT22 to SP and SD terminals,
Do not connect sensors to SP and SD terminals with wires longer than 3 meters,
Do not load the device outputs with a current exceeding 150mA,
Every connected device should be compliant with the relevant safety standards,
Unused lines should be left insulated.
Tips for arranging the antenna:
Locate the antenna as far from metal elements as possible (connecting wires, bracket rings, etc.) in order to prevent interferences,
Metal surfaces in the direct vicinity of the antenna (e.g. flush mounted metal boxes, metal door frames) may impair signal reception!
Do not cut or shorten the antenna ? its length is perfectly matched to the band in which the system operates.
Make sure no part of the antenna sticks out of the wall switch box.
? Compatible with any Z-Wave Controller.
? Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm
? Power monitoring accuracy P=5-50W, +/-3W; P?50W, +/-3%;
? Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125?C
??Support for the connection of digital temperature sensor (optional part)
? 2 binary inputs offer the option to connect additional devices such as sensors, switches/pushbuttons, etc, ?
Strengthens Z-Wave Connectivity
The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you with the flexibility to extend the range of your Z-Wave network.
The QUBINO double switch is?Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our "What is Z-Wave Plus" guide for more information.
Note!
Do not connect the module to loads exceeding recommended values. Connect the module only in accordance with the manual and diagrams below. Use only qualified electricians!
The?FAKRO Z-Wave ZWK10 Wall Controller?is a smart device that enables you to manage several aspects of your home. Through radio communication processing, the FAKRO Z-Wave ZWK10 Wall Controller can interact with 10 devices at once, split into 5 different communication channels (2 devices for 1 channel). You can also categorize devices into 10 independent groups, based on their location and functionality around the home.
The FAKRO Z-Wave ZWK10 Wall Controller can also be customized to operate as a PRIMARY controller for a single radio network, or as a SECONDARY controller for a pre-existing network.
Configuring the controller to operate with each device is a simple process. Each device around the home is given a unique number (known as ?NodeID?) and calibrated to operate on a single Z-Wave? radio network (called ?HomeID?).
Featuring a magnetic wall holder, the FAKRO Z-Wave ZWK10 Wall Controller can be mounted onto any location around the home for quick and easy access. This convenient, all-in-one solution can operate multiple FAKRO and Z-Wave related products.
This product is compatible with:
Home Center 3 is the latest smart home management controller from Fibaro Group. Advanced technology within its components guarantees the highest stability and performance of the FIBARO System.
Z-Wave chip 500 brings an exceptional number of hundreds of integrations with other brands products, which you can use while controlling electronics and household appliances, lighting, blinds, HVAC, alarm, monitoring or watering system - with just a single button, gesture or word.
View the full presentation here.
Aditional protocols will be enabled later this year: