The?FAKRO Z-Wave? ZWK10 Wall Controller??is a wall mounted multi-purpose remote that?s capable of operating up to 10 different FAKRO and Z-Wave? devices. For the simplest solution to managing your range of Z-Wave? and FAKRO devices, the?FAKRO Z-Wave ZWK10 Wall Controller has everything you need.
Easy to install and include into your existing Z-Wave? network setup
Integrates easily and operate FAKRO window openers as well as other Z-Wave? devices
Manage and operate multiple devices using just one controller
The?FAKRO Z-Wave ZWK10 Wall Controller?is a smart device that enables you to manage several aspects of your home. Through radio communication processing, the FAKRO Z-Wave ZWK10 Wall Controller can interact with 10 devices at once, split into 5 different communication channels (2 devices for 1 channel). You can also categorize devices into 10 independent groups, based on their location and functionality around the home.
The FAKRO Z-Wave ZWK10 Wall Controller can also be customized to operate as a PRIMARY controller for a single radio network, or as a SECONDARY controller for a pre-existing network.
Configuring the controller to operate with each device is a simple process. Each device around the home is given a unique number (known as ?NodeID?) and calibrated to operate on a single Z-Wave? radio network (called ?HomeID?).
Featuring a magnetic wall holder, the FAKRO Z-Wave ZWK10 Wall Controller can be mounted onto any location around the home for quick and easy access. This convenient, all-in-one solution can operate multiple FAKRO and Z-Wave related products.
The?FAKRO Z-Wave? ZWK10 Wall Controller??is a wall mounted multi-purpose remote that?s capable of operating up to 10 different FAKRO and Z-Wave? devices. For the simplest solution to managing your range of Z-Wave? and FAKRO devices, the?FAKRO Z-Wave ZWK10 Wall Controller has everything you need.
Easy to install and include into your existing Z-Wave? network setup
Integrates easily and operate FAKRO window openers as well as other Z-Wave? devices
Manage and operate multiple devices using just one controller
The FIBARO Z-Wave RGBW Controller 2 is a wireless controller which enables you to manage your LED strips and halogen lights.
Wirelessly control LEDs with an unlimited range of colour options
Monitors energy usage
Four analogue sensor inputs
Four dimmer channels
Acts as a repeater expanding your Z-Wave network
The Fibaro Roller Shutter Controller is designed to control blind, awning, garage door and gate motors.
Supports five different types of motor systems
Precise positioning of blind or awning
Automatic calibration
Wireless control of AC motors with "three wires" interface
Monitor and analyse energy usage
FIBARO Roller Shutter 3 (FGR-223) is a new Z-Wave Plus version of its predecessor model Fibaro Roller Shutter 2.
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colours (white, black, red, blue, yellow)
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).
A flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening an NC contact.
The device has built in temperature sensor, monitoring the temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by a connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signals in case of substantial inundation of water.
This new Fibaro home controller offers impressive hardware and integration options for installers and clients. This excellent Smart Home controller offers next generation hardware, including:
COMMUNICATION TECHNOLOGY: Z-WAVE (700 series)
NETWORK TECHNOLOGY: Wi-Fi 2.4GHz
CPU: Single-Core ARM Cortex A7 900 MHz
RAM MEMORY: 512 MB
FLASH MEMORY: 4 GB eMMC
The Fibaro Home Center 3 Lite is the perfect controller for small Home Automation projects, offering an excellent solution for smaller homes or apartments. The system is recommended for Smart Homes with up to 40 Z-Wave devices and 20 scenes. But, don't be mistaken by its size, the Fibaro HC3 Lite offers an affordable solution without having to compromise on quality. With this new system, you'll be able to automate a variety of solutions, including:
Content
Product Description
The?FAKRO Z-Wave ZWK10 Wall Controller?is a smart device that enables you to manage several aspects of your home. Through radio communication processing, the FAKRO Z-Wave ZWK10 Wall Controller can interact with 10 devices at once, split into 5 different communication channels (2 devices for 1 channel). You can also categorize devices into 10 independent groups, based on their location and functionality around the home.
The FAKRO Z-Wave ZWK10 Wall Controller can also be customized to operate as a PRIMARY controller for a single radio network, or as a SECONDARY controller for a pre-existing network.
Configuring the controller to operate with each device is a simple process. Each device around the home is given a unique number (known as ?NodeID?) and calibrated to operate on a single Z-Wave? radio network (called ?HomeID?).
Featuring a magnetic wall holder, the FAKRO Z-Wave ZWK10 Wall Controller can be mounted onto any location around the home for quick and easy access. This convenient, all-in-one solution can operate multiple FAKRO and Z-Wave related products.
This product is compatible with:
The FIBARO Z-Wave RGBW Controller 2 is a one of a kind, advanced wireless 4-colour LED strip controller. Apart from the traditional RGB channels it also supports the white light channel which allows you to add pastel colours to your lighting decorations.
The FIBARO Z-Wave RGBW Controller 2 also has four analogue inputs supporting any type of Fibaro sensor (e.g. light sensors, wind sensors, pressure sensors and potentiometers operating between 0-10V). This smart feature allows you to use your lighting as a warning for certain events. You could, for example, set your RGB garden lights to turn red and flicker when one of your security sensors is triggered, alerting your neighbours to the intruder and allowing them to notify the proper authorities.
This device has four output channels which means that you can connect and independently control up to four light sources. The FIBARO Z-Wave RGBW Controller 2 also allows you to monitor the energy consumed by the LED strips. Each of the four channels can be monitored independently providing you with all the information you need to minimise your energy bills.
The FIBARO Z-Wave RGBW Controller 2 can control:
12 / 24V DC powered RGB strips
12 / 24V DC powered RGBW strips
12 / 24V DC powered LED strips, bulbs, etc
12 / 24V DC powered halogen lights
12 / 24V DC powered low output power fans
Note: Power supply is not included.
This product integrates with all Australian certified (921.42 MHz) Z-Wave controllers including:
Fibaro Home Center 3/Lite
Fibaro Yubii Home
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera?s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device?s user manual. In most cases your device?s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Please check the maximum load before installing or operating.This device must be installed by a certified electrician.For all warranty claims, an electrical compliance certificate from your electrician must be provided.
Technical Specifications
RF Protocol
Z?Wave
RF Frequency
921.42Mhz ? AU/NZ ?approved RF for Z?wave
Z?Wave device type
Z-Wave dimmer
Power
12V and 24V
Operation Range
Up to 50m outdoors, up to 30m indoors (depending on terrain and building structure)
Application
Controlled automatically by pre-set Fibaro devices or manually using any Z-Wave controller
The Fibaro Roller Shutter 3 (FGR-223) is an advanced Z-Wave controller for automated roller blinds, awnings, venetian blinds, garage doors and gates. The module can control devices that are powered by an AC electric motor with a "three wire" interface.
The Roller Shutter module features automatic calibration so that you can precisely position the blind. It also includes a power metering feature to help you measure power consumption.
The Fibaro Roller Shutter 2 has five modes that enable it to perfectly control any electric garage door, gate, roller blind, awning or Venetian blind. This allows for the correct configuration and operation of a device through a special interface icon (via the Fibaro HC2).
Roller blinds with positioning
Roller blinds without positioning
Garage doors with positioning
Garage doors without positioning
Venetian blind
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera?s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device?s user manual. In most cases your device?s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
This product must be installed by a qualified electrician.Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.For a warranty claim, you have to provide an installation compliance certificate from your electrician.
The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.
Technical Specifications
RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Power
ER14250 ? AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Storage temperature
?10 ~ 50 ?C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
Product Description
? Compatible with any Z-Wave network controller,
? May be connected to any alarm system (potential-free output terminal),
? Extremely easy installation - simply put on a surface prone to flooding,
? May be installed anywhere - flood sensor?s contacts extended with a wire,
? Battery or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source,
? Theft protection - tilt is reported to the Z-Wave network or alarm system?s main controller,
? Two operating modes - flood/temperature sensor or just a temperature sensor.
Security:
The FIBARO System will ensure the safety of you and your loved ones.
Smoke detection
Carbon monoxide detection
Flood detection
Operation as a wireless alarm system
Cooperation with the existing wired alarm system (eg SATEL) and security companies
Emergency door opening
Closing the roller shutters when you are away
Health:
The FIBARO System will help you ensure the right conditions for your health.
Humidity control
Smart heating
Measurement of air quality and quality of PM2.5 and PM10 dust
Detection of hazardous gases
Control of ventilation and recuperation
Notifications in case of dangerous situations
Convenience:
An intelligent home is primarily about increasing comfort and facilitating everyday activities.
Voice control
Remote home control from applications for phones, tablets and smart watches
Automatic scenarios - grouping devices, schedules and scenes
Control over devices with one button or remote control
Combining all elements of the house into one ecosystem
Sustainability:
FIBARO will ensure that your home has a minimal impact on the surroundings and the environment.
Intelligent heating control leading to a reduction in the demand for heating media
Build awareness through the energy panel and measure current electricity consumption
The use of dimmers, thermostats or intelligent heads leads to significant energy savings
Savings:
In the FIBARO system, your savings are very important.
The heating system is intelligently controlled through schedules and the presence of the household members
The use of dimmers and LED drivers leads to a reduction in bills
The ability to use scenarios and automation ensures that no devices will be redundantly used