FAKRO Z-Wave Weather Module

 

$197.99

Availability: In Stock

The FAKRO Z-Wave™ ZWMP Weather Module is the primary component for monitoring outside weather conditions, along with offering compatibility with a variety of Z-Wave™ home automation gateways. When installed in conjunction with the FAKRO ZRD Rain Sensor and FAKRO ZWD Wind Sensor, they can automatically close windows upon detecting wind or rainfall.

  • Easy to install and include into your existing Z-Wave™ network setup
  • Compatible with the FAKRO ZRD Rain Sensor, FAKRO ZWD Wind Sensor, Thermostat and other external devices
  • Automatically sends closure requests to electronic shutters, windows and skylights upon detecting rain or wind
  • Can work as a Primary or Secondary controller
  • Easily programmable to communicate with compatible Z-Wave gateways

1 in stock

SKU: DHS-WIN-WM-FKR Categories: , Tags: , ,

Description

Product Description

Providing a central unit for monitoring changing weather conditions, the FAKRO Z-Wave ZWMP Weather Module takes full advantage of the Z-Wave™ system to allow for seamless inclusion into the home environment.

Including the ZWMP Weather Module into the Z-Wave system is simply using your Z-Wave Controller, in order for the device to be recognized. From there, each individual shutter/window or skylight installation can be programmed to interact with the ZWMP Weather Module, which will allow it to respond to changing weather conditions. The ZWMP Weather Module contains three digital inputs, which allows various external devices to be plugged in (ie. Rain and wind sensors, time switch, thermostat etc). With a working range of up to 40 meters, the ZWMP Weather Module can seamlessly interact with other Z-Wave devices around the household.

This product is compatible with:

Technical Specifications

RF Protocol
Z-Wave™
RF Frequency
921.42Mhz – AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave Controller
Status Indicator
LED Lights
Operation Range
Up to 40m without obstacles
Power
 230VAC
Operation temperature
+5 ~ 45 °C
Dimensions L x W x H
 120mm x 80mm x 50mm
Weight
575g
Housing
ABS

Quick Comparison

SettingsFAKRO Z-Wave Weather Module removeFIBARO Z-Wave Button (Red) removeFIBARO Z-Wave KeyFob removeFIBARO Z-Wave Button (Blue) removeFIBARO Z-Wave Dimmer 2 removeFAKRO Z-Wave W/Chain Winder15V remove
Image
SKUDHS-WIN-WM-FKRDHS-CON-SBUT-FIB-RDDHS-CON-KFB-FIBDHS-CON-SBUT-FIB-BUDHS-LIT-DMW-FIB-02DHS-WIN-WO-FKR-12
Rating
Price$197.99$79.99$79.99$79.99$98.99$424.99
Stock

1 in stock

5 in stock

2 in stock

3 in stock

20 in stock

Out of stock

Availability1 in stock5 in stock2 in stock3 in stock20 in stockOut of stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Read more

DescriptionThe FAKRO Z-Wave™ ZWMP Weather Module is the primary component for monitoring outside weather conditions, along with offering compatibility with a variety of Z-Wave™ home automation gateways. When installed in conjunction with the FAKRO ZRD Rain Sensor and FAKRO ZWD Wind Sensor, they can automatically close windows upon detecting wind or rainfall.
  • Easy to install and include into your existing Z-Wave™ network setup
  • Compatible with the FAKRO ZRD Rain Sensor, FAKRO ZWD Wind Sensor, Thermostat and other external devices
  • Automatically sends closure requests to electronic shutters, windows and skylights upon detecting rain or wind
  • Can work as a Primary or Secondary controller
  • Easily programmable to communicate with compatible Z-Wave gateways
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)
The FIBARO Keyfob is a battery powered, compact remote controller that allows you to control devices in your Z-Wave network.
  • Supports 30 different actions
  • Z-Wave Plus certified
  • Fully configurable, automatic pin lock prevents unauthorised use
  • Supports protected mode (Z-Wave network security mode) with AES-128 encryption
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
  • Completely wireless
  • Z-Wave Plus certified
  • Supports 6 different actions/scenes
  • Available in multiple colours (white, black, red, blue, yellow)
The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is the newest version of a popular wireless controller designed to operate behind a wall switch.
  • Control the level of illumination of your light remotely or using a manual button (in two and three way configurations)
  • Implemented algorithm of smart light source detection
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive re-wiring
  • Active power and energy metering functionality
  • Works with various types of manual buttons
  • Active element: semiconductor electronic switch
The FAKRO Z-Wave W/Chain Winder 12V is highly recommended for rooms with hard to reach windows. An automated system that controls ventilation openings can contribute significantly to maintaining a healthy and comfortable indoor climate. The European engineered, manufactured and certified FAKRO Z-Wave Chain Winder is the perfect solution to inaccessible windows and centralised managed buildings with automated natural ventilation. topbaner electric2
  • Program in conjunction with the FAKRO ZWMP Weather Module, for automated window closing upon detecting rain and windfall
  • Remote control functionality for ease of use
  • Overload protection
  • Easily programmable to communicate with compatible Z-Wave gateways
  • Automatic switch-off once fully extended
Content

Product Description

Providing a central unit for monitoring changing weather conditions, the FAKRO Z-Wave ZWMP Weather Module takes full advantage of the Z-Wave™ system to allow for seamless inclusion into the home environment. Including the ZWMP Weather Module into the Z-Wave system is simply using your Z-Wave Controller, in order for the device to be recognized. From there, each individual shutter/window or skylight installation can be programmed to interact with the ZWMP Weather Module, which will allow it to respond to changing weather conditions. The ZWMP Weather Module contains three digital inputs, which allows various external devices to be plugged in (ie. Rain and wind sensors, time switch, thermostat etc). With a working range of up to 40 meters, the ZWMP Weather Module can seamlessly interact with other Z-Wave devices around the household. This product is compatible with:

Technical Specifications

RF Protocol
Z-Wave™
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave Controller
Status Indicator
LED Lights
Operation Range
Up to 40m without obstacles
Power
 230VAC
Operation temperature
+5 ~ 45 °C
Dimensions L x W x H
 120mm x 80mm x 50mm
Weight
575g
Housing
ABS

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS

Product Details

The FIBARO Keyfob is a Z-Wave Plus (500 series) compatible, battery-powered, compact remote controller designed to control devices within your Z-Wave network. With six buttons, which support 30 different actions, the FIBARO Keyfob allows you to control Z-Wave devices within your Z-Wave network and run various scenes defined in your Z-Wave gateway. Configure actions for one, two, three clicks, holding the button and specific button sequences to suit all your home automation needs. The FIBARO Keyfob also features a built-in, configurable pin lock system that automatically locks the device after a short period of inactivity (60 seconds by default) which prevents unauthorized control of your home. Note: This device is currently only compatible with the FIBARO Home Center 2 and FIBARO Home Center Lite Z-Wave gateways. Please ensure that you are running the latest Fibaro firmware (at least 4.120)

Documentation

FIBARO Keyfob User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave controller
Power
CR2450 3.0V battery (included)
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor and outdoor use
Operation temperature
10 ~ 40 °C
Storage temperature
-10 ~ 60 °C
Weight
100g
Dimensions
70mm x 38mm x 15mm
Housing
ABS
 

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene. Designed to be small and light, the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device may be used with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers. FIBARO Button is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize the product.

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
The Fibaro Z-Wave In-Wall Dimmer 2 is designed to operate with or without a neutral wire. It may be used as a switch in systems without a neutral wire. In the case of a 2-wire connection (no neutral), the Fibaro Z-Wave In-Wall Dimmer 2 may require a minimum load of 50W depending on the specifics of the connected load. When used with a Fibaro Dimmer Bypass 2 it may operate with any compatible (see below) load from 5W. Before committing to buy Fibaro Dimmer Bypass 2 please check if your load can be properly controlled by Fibaro Dimmer 2 without a bypass device. Do not connect this device to a power supply without a load. Only lighting devices may be connected to this device. As a dimmer it operates with the following loads:
  • 230V operated conventional incandescent (from 50W to 250W)
  • 230V operated halogen (from 50W to 200W)
  • 12 V operated ELV halogen lamps and dimmable LED lamps (with electronic transformers: Trailing and Leading-edge type) (from 50W to 200W)
  • 12V operated MLV halogen lamps (with ferromagnetic transformers) (from 50W to 225W)
  • Dimmable CFL tube lamps with electronic ballast only (from 50W to 200W)
As a switch it operates with the following loads:
  • Compact fluorescent lamps with electronic ballast
  • LED bulbs (power factor >0.7)
  • Fluorescent tube lamps with electronic ballast
Please note: For loads other than resistive do not exceed a 1.5A current. This product integrates with all Australian certified (921.42 MHz) Z-Wave and Z-Wave Plus controllers including:
  • Vera Plus/ Edge
  • Fibaro Home Center 2 / Lite
Please note: Do not mix the load type (e.g. LED and CFL or different types of transformers) as it will impede the proper operation of the dimmer. Doing so will void the dimmer's warranty. This product must be installed by a qualified electrician. Before engaging an electrician, check that they provide a warranty and electrical compliance certificate. For a warranty claim, you have to provide an installation compliance certificate from your electrician. PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS: Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using Zellweger equipment or similar onto their distribution networks in order to remotely control devices such as off-peak hot water systems and street lighting, although other areas within Australia also use this technology. Not all properties are affected by ripple control, so just because you might live in one of these areas, does not mean that you will have these problems. Ripple injection control systems work by superimposing coded control signals, commonly 750Hz or 1050Hz on the 50 Hz mains supply. Some electrical appliances such as fans, dimmers, toasters and LED lighting can be sensitive to this ripple control signal. The results could be audible buzzing noises from fans or flickering lights whenever the ripple control signals are present. Electricity suppliers are advising users to install appropriate ripple signal filters in such areas. The ripple signal filter is a tuned passive inline filter that completely eliminates the superimposed ripple injection control signal from the normal mains supply to produce a noise free filtered mains supply which can then be connected to the electrical appliances or light control systems. The ripple signal filter is specifically tuned to eliminate the ripple control signal frequency of 750Hz or 1050Hz. However, we can’t guarantee the ripple signal filter always will help you if you experiencing such issues. Please contact your local energy provider to get more information and proposed solutions for your electrical installation. If you are getting similar problems with your dimmers and fans and it’s not Ripple Control Signal and you are hearing the tones at random times of the day, your electrical supply may be affected by harmonics; a power fluctuation that is not part of the normal electricity supply or ripple control signal output. Harmonics are caused by interference created by other equipment on the network, such as inverter type air conditioners and switch mode power supplies for computers. The offending appliances may be in your home or other premises on the local power grid. If you are being affected by network harmonics, it may be of benefit to transfer the electricity supply to your premises to a different phase in the street. This is something you will need to discuss with your electrical company. We are strongly recommending for the areas we have mentioned above to run tests with only a few dimmers before committing for high volumes. If results are not fully OK you may use relays only instead of dimmers. Please note that our warranty for the faulty devices is not covering above mentioned conditions with your local electric grids. Please see affected with Ripple Signalling areas here:

QUEENSLAND

  • Only Southern Queensland (Energex) has Ripple Signalling.
  • The Frequency is 1050Hz.
  • The rest of Queensland (Ergon) does not have Ripple Signalling.

NSW

  • Energy Australia Full Supply Area
  • Energy Australia Sydney &Hunter Supply Area

Documentation

Fibaro Z-Wave In-Wall Dimmer 2 Manual

Technical Specifications

RF Protocol
Z-Wave
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐wave device type
Z-Wave multiple level dimmer, routing slave
Power Supply
220 - 240V ~ 50Hz
Operation Range
Up to 30m indoors (depending on building materials)
Application
Indoor use only
Operation temperature
0 ~ 35 °C
Dimensions (L x W x H)
42.5mm x 38.25mm x 20.3mm
Weight
30g
Operational Current
0.25 - 1.1A
Compliance
RCM E3606
Dimming type compatibility
Leading and Trailing Edge

Product Description

For the most convenient use of your motorized window system, the FAKRO Z-Wave Chain Winder allows for remote accessibility anywhere around the home. Featuring an intuitive button prompt command process, this Z-Wave Chain Winder can easily be included in any existing Z-Wave system.

From skylights, awnings, tilted fixtures to bottom-hung/top-hung windows, the Chain Winder can be installed into many common window fittings. For the best results and consideration for your safety, always rely on a qualified electrician to install the Z-Wave Chain Winder device for you. The Chain Winder interacts with other Z-Wave products through a two-way radio communication system, which allows for uninterrupted operation on a consistent basis. The catch holder comfortably connects to the actuator chain for a strong and durable fitting, while the programming and manual operation buttons allow for easy inclusion with other Z-Wave devices.

Installation options:

1 Skylight or awning – fixed mounting (inside the frame)

2 Skylight or awning – with angle brackets (inside the frame)

3 Tilt or awning window – fixed mounting (sash mounted)

4 Tilt or awning window – with angle brackets (sash mounted)

5 Tilt or awning window - frame-mounted

 

Area of Application:

bottom-hung, top-hung windows and skylights

This product is compatible with:

Technical Specifications

RF Protocol
 Z-Wave™
RF Frequency
 921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
 Z-wave binary opener, routing slave
Status Indicator
 LED Lights
Operation Range
 Up to 40m without obstacles
Application  Indoor use only
Power supply
 12-15V DC (power supply not included)
Rated current  0.72A
Standby current  0.03A
Connection type Flying leads wires 2 x 0.75mm2 (0.4m)
Operation temperature
 -5 ~ 50 °C
Dimensions L x W x H
 262mm x 47mm x 33.5mm
Opening / Closing force  200 N
Chain reach  240mm
Weight
 0.85 kg
Housing
Metal Alloy
Limit stop  Microswitches
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information