AEOTEC Flood Sensor Dock

$34.99

Availability: In Stock

Pro-tool. Pro-tection.

Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.

ZW160a

What Dock enhances.

Monitor 2 areas.

Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.

ZW160d

Monitor a whole area.

Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.

ZW160c

2 in stock

Description

Product Description

Power optimised.

Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6?s battery acts as an emergency backup.

Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don?t even have to use them. But if you do, Water Sensor 6?s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock.

Wireless optimised.

Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna.

Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges.
Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to.

In the box.

3M double side adhesive tape.
Desktop style of adapter without pins.
Dock for Water Sensor
6. Mounting screws.
Spot sensing rope x 2. USB cable for optional power supply.

Product Support

Manuals:

? Aeotec Dock for Water Sensor 6 product manual

Aeotec LED Bulb with Vera copy

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz – AU/NZ ?approved RF for Z-wave
Z-Wave device type
Device Dock
Power
USB, batteries
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
120mm x 61mm x 33mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Quick Comparison

SettingsAEOTEC Flood Sensor Dock removeDHS Garage Press Limit Switch removeDHS Garage Roller Limit Switch removeAEOTEC WallMote Quad removeAEOTEC Recessed D/W Sen removeAEOTEC Nano Dimmer Bypass remove
Image
SKUDHS-SNS-FL-AEO-RECDHS-SNS-LS-DHS-02DHS-SNS-LS-DHS-01DHS-CON-SCON-AEO-04DHS-SNS-DW-AEO-RECDHS-LIT-BPASS-AEO
Rating
Price$34.99$19.99$19.99$99.99$89.99$24.99
Stock

2 in stock

12 in stock

2 in stock

Out of stock

2 in stock

Availability2 in stock12 in stock2 in stockOut of stock2 in stock
Add to cart

Add to basket

Add to basket

Add to basket

Read more

Add to basket

Add to basket

DescriptionPro-tool. Pro-tection. Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available. ZW160a What Dock enhances. Monitor 2 areas. Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas. ZW160d Monitor a whole area. Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it. ZW160cThe?DHS Garage Press Limit Switch can be connected with any binary Z-Wave sensors such as the?FIBARO Z-Wave Door/Window Sensor?to report the status of your garage door to your Z-Wave gateway. Note:?A Z-Wave sensor is not included with this device.The?DHS Garage Roller Limit Switch can be connected with any binary Z-Wave sensors such as the?FIBARO Z-Wave Door/Window Sensor?to report the status of your garage door to your Z-Wave gateway. Roller Limit SwitchRoller Limit Switch ActionRoller Limit Switch 2 Note:?A Z-Wave sensor is not included with this device.On any wall. The?AEOTEC WallMote?is the wall switch that you can install anywhere. Wirelessly. Whatever the room, whatever the wall, the?AEOTEC WallMote?is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away. ZW130a Simple to install. The?AEOTEC WallMote?is the wall switch for anywhere. You can mount it in just two steps! Attach the mounting plate. Attach the mounting plate. The?AEOTEC WallMote?s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done. Attach WallMote. The?AEOTEC WallMote?is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.The Z-Wave door sensor is finally invisible. At less than 0.4? in width some might call it small and compact. We prefer to call it invisible. It?s the Z-Wave door sensor that?s been designed as the door sensor should have always been. Powerful but invisible. Recessed Door Sensor is a clever piece of technology that installs simply within your door?s frame. It?s as beautiful as the rest of your home. You never see it; you just feel its benefits. Recessed Door Sensor 7, Z-Wave Plus ZW089d Perfect sensor. Perfect compatibility. With its foundation resting upon Z-Wave Plus, the Recessed Door Sensor is compatible with leading Z-Wave gateways and backends out of the box. Z-Wave Plus V2 Door Sensor, built on the Aeotec 700 series, will deliver a significantly improved experience by mandating the inclusion of SmartStart, a setup feature that will truly bring plug and play to your smart home. Comprised of two parts: the Main Sensor and the Magnetic Sensor. Comprised of two parts: the Main Sensor and the Magnetic Sensor.Stop dimmed lights flickering. Dimming energy-saving lights is complicated ? there?s a lot of different technologies built into modern bulbs. That?s why dimmed lights sometimes flicker or remain on ? power trickles through.?The?AEOTEC Dimmer Bypass?works with the?AEOTEC Nano Dimmer?to remove the signals from your power line that cause low-watt lightbulbs to flicker. z wave bypass dimmer If you want to control low-voltage lighting that?uses less than 4 Watts?using an?AEOTEC Nano Dimmer?you will need to include the?AEOTEC Dimmer Bypass?in your installation to ensure the lights do not flicker.
Content

Product Description

Power optimised. Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6?s battery acts as an emergency backup. Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don?t even have to use them. But if you do, Water Sensor 6?s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock. Wireless optimised. Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to. In the box. 3M double side adhesive tape. Desktop style of adapter without pins. Dock for Water Sensor 6. Mounting screws. Spot sensing rope x 2. USB cable for optional power supply.

Product Support

Manuals: ? Aeotec Dock for Water Sensor 6 product manual Aeotec LED Bulb with Vera copy

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Device Dock
Power
USB, batteries
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
120mm x 61mm x 33mm
Compliance
Z-Wave Plus certified
Warranty 12 Months
The?DHS Garage Press Limit Switch?is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.

Technical Specifications

Product Name?
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20?C to 70?C
Service life Mechanically: 10,000,000 operations min.
Net?Weight
100g
Housing
ABS, aluminium
Size?
10.5 x 2.8 x 3cm
The?DHS Garage Roller Limit Switch?is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.

Technical Specifications

Product Name?
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20?C to 70?C
Service life Mechanically: 10,000,000 operations min.
Net?Weight
100g
Housing
ABS, aluminium
Size?
10.5 x 2.8 x 3cm

Product Description

Control on tap. Control one Z-Wave device. Control many. And all with a single tap. There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of your?AEOTEC WallMote?s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between. ZW130c wallmote mountwallmote engineeringwallmote glass Control a light. Control a room. Control a home. Because the?AEOTEC WallMote?communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top. ZW130b Wireless switch. To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres. Secure switch. Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date. Subtle switch. Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep Simple recharging. Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable. Haptic feedback. It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote?s touch glass. But you will feel the change. WallMote?s haptic engine confirms your every action via a click sensation. Gen5 built in. WallMote and WallMote Quad are part of Aeotec?s Gen5 range of Z-Wave devices. Built upon the latest version of Z-Wave- Z-Wave Plus ? cutting-edge performance and security is crafted into Z-Wave?s most advanced battery-powered wall switch.

Product Support

Works with VeraAeotec Door Window Sensor 6 and Vera Manuals: ?? Aeotec WallMote Quad product manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z?Wave device type
Multilevel controller
Power
Rechargeable Lithium-ion
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
100g
Housing
ABS
Dimensions
(LxWxH) 72mm x 72mm x 9mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

2+ year battery life. Z-Wave Plus V2 Door Sensor Changing the battery is as simple as lifting Recessed Door Sensor out of your door, swapping the battery, and inserting the sensor back into your door. Perfect wireless. Security sensors have to be dependable. Recessed Door Sensor is. Its wireless communication range reaches Z-Wave?s maximum: up to 150 metres / 492 feet when unobstructed. Gen7. A security sensor has to be secure. Recessed Door Sensor couples Z-Wave Plus with Aeotec?s Gen5. That enables the sensor to utilise AES 128-bit communication encryption in order to secure your home. Z-Wave Plus. Furthering your ability to depend upon it, the Recessed Door Sensor is built upon the latest version of Z-Wave, Z-Wave Plus. That enables the sensor to communicate 250% faster and with 50% less battery use than older sensors. Smart Door Senor- Removing the complexity of installation, with a quick app scan of its QR code, drastically shortening and simplifying the product setup process for you. Safer than the previous generation. Comes with Z-Wave Security 2 (S2) framework which is the most advanced security for smart home devices and controllers, gateways and hubs in the market today, it?s better to protect your family.

Product Support

Anytime and anywhere, giving you a full sense of security. Compatible with Fibaro HC3, Fibaro HC3Lite, Yubii, Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 921.42 MHz Works with VeraAeotec LED Bulb with Vera   Manuals: ?? Aeotec Recessed Door Sensor Gen7 product manuals

Technical Specifications

RF Protocol
Z-Wave Plus (700 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Binary sensor
Power
3 V DC,?CR123A
Operation Range
Up to 150m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
white
Weight
50g
Housing
ABS
Size
43mm x 40mm x 16mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Compatible bulbs. There are a lot of different types of low-power light bulbs that your home may have; Bypass has been designed to work with most of them. It?s been designed to stop most bulbs from flickering including?static and dimmable LEDs and CFLs.

Product Support

Wiring diagram. ZW150w 3-wire connection with neutral and bypass load. ZW150w1 2-wire connection without neutral and bypass load.   Manuals: ?? Aeotec bypass for Nano Dimmer product manual

Technical Specifications

Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
black
Weight
10g
Housing
ABS
Size
(0.98 x 0.39 x 0.75 in)
Warranty 12 Months
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information