$79.99
The Fibaro Flood Sensor is a HomeKit-enabled water sensor using Bluetooth low energy technology. The Fibaro Flood Sensor detects both water leaks and temperature. Tampering is detected whenever the accessory is moved or the casing is opened. This water sensor can be placed on the floor or mounted on a wall to protect hard to reach places (in this case sensor should be extended using an external probe).
7 in stock
The Fibaro Flood Sensor is a HomeKit-enabled water sensor using Bluetooth low energy technology. The Fibaro Flood Sensor detects both water leaks and temperature. Tampering is detected whenever the accessory is moved or the casing is opened. This water sensor can be placed on the floor or mounted on a wall to protect hard to reach places (in this case sensor should be extended using an external probe).
| Settings | FIBARO HomeKit Flood Sensor remove | FIBARO Z-Wave Button (Black) remove | FIBARO Z-Wave Implant remove | FIBARO Z-Wave Multi Sensor remove | FIBARO Dimmer Bypass 2 remove | FIBARO D/W Sensor 2 (Beige) remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image | 
| 
| 
| 
| 
| 
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | FGBHFS-101 | DHS-CON-SBUT-FIB-BL | DHS-SNS-IMP-FIB | DHS-SNS-MS-FIB | DHS-LIT-BPASS-FIB-2 | DHS-SNS-DW-FIB-LB-02 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | $79.99 | $78.00 | $69.99 | $84.99 | $19.99 | $73.99 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | 7 in stock | Out of stock | Out of stock | Out of stock | 12 in stock | Out of stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | 7 in stock | Out of stock | Out of stock | Out of stock | 12 in stock | Out of stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | The Fibaro Flood Sensor is a HomeKit-enabled water sensor using Bluetooth low energy technology. The Fibaro Flood Sensor detects both water leaks and temperature. Tampering is detected whenever the accessory is moved or the casing is opened. This water sensor can be placed on the floor or mounted on a wall to protect hard to reach places (in this case sensor should be extended using an external probe). | The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
| FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication. You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller. It can also control devices by opening/closing output contacts independently of the inputs. | The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems. | The?Fibaro Dimmer Bypass 2?(FGB-002)?is a?supplementary?device to the?Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
| The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | The Fibaro Flood Sensor is a HomeKit-enabled water sensor using Bluetooth low energy technology. The Fibaro Flood Sensor detects both water leaks and temperature. Tampering is detected whenever the accessory is moved or the casing is opened. This water sensor can be placed on the floor or mounted on a wall to protect hard to reach places (in this case sensor should be extended using an external probe). | Product DetailsThe FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
Technical Specifications
| Product DescriptionSupports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption. Works as a Z-Wave signal repeater. Allows for connecting sensors: 6 DS18B20 sensors, 1 DHT sensor, 2 2-wire analog sensor, 2 3-wire analog sensor, 2 binary sensors. Built-in temperature sensor. This product works with : Fibaro Home Controller 3/2/Lite Please note: THE DEVICE IS NOT COMPATIBLE WITH VERA HOME CONTROLLERS Before installation Connect only in accordance with one of the diagrams, The device is powered with secure voltage; nevertheless, the user should be extra careful or should commission the installation to a qualified person, Do not connect devices that are not compliant with the specification, Do not connect other sensors than DS18B20 or DHT22 to SP and SD terminals, Do not connect sensors to SP and SD terminals with wires longer than 3 meters, Do not load the device outputs with a current exceeding 150mA, Every connected device should be compliant with the relevant safety standards, Unused lines should be left insulated. Tips for arranging the antenna: Locate the antenna as far from metal elements as possible (connecting wires, bracket rings, etc.) in order to prevent interferences, Metal surfaces in the direct vicinity of the antenna (e.g. flush mounted metal boxes, metal door frames) may impair signal reception! Do not cut or shorten the antenna ? its length is perfectly matched to the band in which the system operates. Make sure no part of the antenna sticks out of the wall switch box. | Product Details
Technical Specifications
| The?Fibaro Dimmer Bypass 2?is designed to support?Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw a minimum of 5W (e.g LED lighting).
It can be used in the case of connecting LED bulbs or energy-saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of a 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cos?>0.5)
Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For a warranty claim, you have to provide an installation compliance certificate from your electrician.
DocumentationFibaro Z-Wave In-Wall Dimmer 2 Manual Fibaro Z-Wave Dimmer 2 Bypass ManualTechnical Specifications
| Product DetailsThe FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.DocumentationFIBARO Z-Wave Door/Window Sensor 2 User ManualTechnical Specifications
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
