Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).
A flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening an NC contact.
The device has built in temperature sensor, monitoring the temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by a connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signals in case of substantial inundation of water.
• Compatible with any Z-Wave network controller,
• May be connected to any alarm system (potential-free output terminal),
• Extremely easy installation – simply put on a surface prone to flooding,
• May be installed anywhere – flood sensor’s contacts extended with a wire,
• Battery or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source,
• Theft protection – tilt is reported to the Z-Wave network or alarm system’s main controller,
• Two operating modes – flood/temperature sensor or just a temperature sensor.
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).
A flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening an NC contact.
The device has built in temperature sensor, monitoring the temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by a connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signals in case of substantial inundation of water.
Smart sensors.
Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the AEOTEC MultiSensor 6 and AEOTEC TriSensor allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.
The Aeotec Door/Window Sensor 7 is a Z-Wave Plus device for detecting if a door or window is opened or closed. Small, battery powered (included) and easily attached to virtually anything that opens or closes around your home. Door Window Sensor 7 also includes universal "dry contact" terminals allowing you to wire in other external sensors. Z-Wave Plus certified, the AEOTEC Door/Window Sensor 7 is compatible with all certified Z-Wave gateways including Control4 (Z-Wave enabled), HomeSeer, Indigo for Mac, and Vera/Ezlo Edge/VeraPlus/VeraSecure/Athom Controllers.
It’s Aeotec's fastest sensor yet with 50% faster communication than other models. Its sensor’s enhanced sensitivity and use of Z-Wave S2 and Aeotec’s exclusive Spatial Intrusion Algorithm means that the Z-Wave wireless signals your smart home depends on are transmitted, received and processed instantly.
Maximised wireless range.
To be simple to install, it has to be wireless. To secure your home, its engineering has to be perfect. Door / Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to communicate wirelessly 50% faster and up to 67% further in real-world use.
Optimised battery life.
Wireless is convenient but having to change batteries too often is annoying. That’s why Door / Window Sensor 7 features a unique balance of hardware and software optimisations which allow it to use up to 66% less battery power to communicate via Z-Wave Plus. It’s German engineering at its very best.
Intelligent multi-sensor.
It's not just a security or an intelligence sensor - it's a 3-in-1 multipurpose sensor. Door / Window Sensor 7 features a unique layering of a contact sensor (reed switch), gyroscope and universal binary input sensor.
Secure security.
It drives your home’s security - so it needs to be secure. Door / Window Sensor 7 combines ECDH key exchange and AES-128 bit communication encryption to render man-in-the-middle and brute force hacking virtually impossible.
Water Sensor 6.
Flood sensor. Leak sensor. Safety sensor. Water Sensor 6. Your home’s 6th sense.
We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs.
Total Control.
Water Sensor 6 monitors your home.
Leaks & bursts.
Water Sensor 6 can detect minuscule amounts of water – as little as 0.5mm / 0.02” of water. That makes it your first line of defence against damaged plumbing.
Floods.
Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements.
Overflows.
Accidents happen but that doesn’t make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you’ve forgotten to turn off before it’s too late.
The DHS Garage Press Limit Switch can be connected with any binary Z-Wave sensors such as the FIBARO Z-Wave Door/Window Sensor to report the status of your garage door to your Z-Wave gateway.
Note: A Z-Wave sensor is not included with this device.
Shelly Humidity & Temperature Sensor H&S Smart Home Automation WiFi Solution - Black
Shelly Humidity & Temperature Sensor helps with monitoring changes in humidity and temperature while avoiding dryness and keeping comfortable conditions at your home.
Wireless: Connect Shelly Humidity & Temperature Sensor directly to your Wi-Fi network, without the need for any additional controller.
Humidity: Monitor excessive changes in humidity. Avoid dryness and conditions for mould growth.
Temperature control: Be aware of temperature fluctuations and keep your home comfortable at any time.
Easy to use: The only thing you need to manage your Shelly H&T is a mobile phone and the Shelly Cloud app.
Long-lasting battery: Feel more comfortable with Shelly H&T’s long-lasting battery life of up to 16 months.
With Shelly Humidity & Temperature Sensor you can see recorded data for humidity and temperature for up to a year.
USB power supply: An optional accessory that allows you to power the device with a cable instead of a battery
Monitor remotely: Monitor your home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices.
CONTROL ANY ELECTRIC HEATER
Turn the cheapest heaters into the smartest devices with Shelly Humidity & Temperature Sensor and Shelly Plug - you can automatically control any electric heater.
365-DAY HISTORY
Shelly Humidity & Temperature Sensor records all the data for humidity and temperature.
Long-Lasting Battery Life
A perfect design combined with a battery lasting up to 16 months keeps your home always comfortable.
FOR DEVELOPERS
Shelly Humidity & Temperature Sensor (H&T) is open to the world and developers. Shellys are secured but at the same time give everyone the opportunity to use them easily in new and existing projects. With the embedded web server and the HTTP commands Shelly can be made compatible with your existing home automation system.
This product is approved for use in Australia but must be installed by a licensed electrician.
Content
Product Description
• Compatible with any Z-Wave network controller,
• May be connected to any alarm system (potential-free output terminal),
• Extremely easy installation - simply put on a surface prone to flooding,
• May be installed anywhere - flood sensor’s contacts extended with a wire,
• Battery or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source,
• Theft protection - tilt is reported to the Z-Wave network or alarm system’s main controller,
• Two operating modes - flood/temperature sensor or just a temperature sensor.
Product Description
Still perfectly powered.
Whichever power method you’re using with your multi-sensor, you can keep on using it with the AEOTEC Recessor.
The AEOTEC Recessor has been designed to allow for each sensor’s batteries to still easily be changed, or for the AEOTEC MultiSensor 6’s optional power cable to be used if you prefer to power your sensor without batteries.
Still precise.
The AEOTEC Recessor doesn’t just convert the AEOTEC MultiSensor 6 into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your AEOTEC MultiSensor 6 can be angled up to 30º within the Recessor, fine tuning its measurements and readings to be just where you need them.
Product Support
The perfect accessories. The AEOTEC MultiSensor 6 ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.
Install the AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm. (sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360° and refine its field of view by up to 50°.
USB cable. (sold separately)
After 2 years you won’t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the AEOTEC MultiSensor 6 can be easily installed with just the provided double sided tape from 3M.
Manuals:⇒ Aeotec Multisensor 6 product manual
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
Keep product and batteries away from open flames and extreme heat. Avoid direct sunlight or heat exposure. Always remove all batteries from products that are being stored and not used. Batteries may damage the appliance if they leak. Do not use rechargeable batteries. Ensure correct polarity when inserting the batteries. Improper battery use may damage the product.
Door / Window Sensor 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet locations.
It contains small parts; keep away from children.
The sensor can be mounted either on the moving part or on the fixed part of a door or a window. Mounting can be accomplished either using the tape by peeling off the protection foil or using two screws with holes inside the battery compartment. If the tilt detection on a window (only normal windows, no roof windows) shall be used the sensor device must be placed on the moving part of the window and the magnet on the window frame.
The leak sensor with sensors.
Water Sensor 6 is a part of the AEOTEC Z-Wave intelligence range. It’s been designed to protect your home and it’s also been designed to make your smart home smarter. Three separate sensors are crafted into each Water Sensor 6.
Each of these sensors can be used to create intelligent home control scenarios via your Z-Wave gateway including the management of underfloor heating, HVAC control, and driveway heating.
Water sensor.
4 gold tipped water probes actively monitor for leaks and drips.
Vibration sensor.
Tamper and emergency events are confirmed by an algorithm that includes vibration detection.
Temperature sensor.
Crafted for heating management, an inbuilt temperature sensor can monitor temperatures between -20ºC and 100ºC.
It’s Aeotec's fastest sensor yet with 50% faster communication than other models. Its sensor’s enhanced sensitivity and use of Z-Wave S2 and Aeotec’s exclusive Spatial Intrusion Algorithm means that the Z-Wave wireless signals your smart home depends on are transmitted, received and processed instantly.
Maximised wireless range.
To be simple to install, it has to be wireless. To secure your home, its engineering has to be perfect. Door / Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to communicate wirelessly 50% faster and up to 67% further in real-world use.
Optimised battery life.
Wireless is convenient but having to change batteries too often is annoying. That’s why Door / Window Sensor 7 features a unique balance of hardware and software optimisations which allow it to use up to 66% less battery power to communicate via Z-Wave Plus. It’s German engineering at its very best.
Intelligent multi-sensor.
It's not just a security or an intelligence sensor - it's a 3-in-1 multipurpose sensor. Door / Window Sensor 7 features a unique layering of a contact sensor (reed switch), gyroscope and universal binary input sensor.
Secure security.
It drives your home’s security - so it needs to be secure. Door / Window Sensor 7 combines ECDH key exchange and AES-128 bit communication encryption to render man-in-the-middle and brute force hacking virtually impossible.
Total Control.
Water Sensor 6 monitors your home.
Leaks & bursts.
Water Sensor 6 can detect minuscule amounts of water – as little as 0.5mm / 0.02” of water. That makes it your first line of defence against damaged plumbing.
Floods.
Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements.
Overflows.
Accidents happen but that doesn’t make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you’ve forgotten to turn off before it’s too late.
Still precise.
The AEOTEC Recessor doesn’t just convert the AEOTEC MultiSensor 6 into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your AEOTEC MultiSensor 6 can be angled up to 30º within the Recessor, fine tuning its measurements and readings to be just where you need them.
Recessor.
Install the AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm. (sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360° and refine its field of view by up to 50°.
USB cable. (sold separately)
After 2 years you won’t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the AEOTEC MultiSensor 6 can be easily installed with just the provided double sided tape from 3M.
Manuals:
