NICE 2 Channel Transmitter

 

$62.99

Availability: In Stock

A Two Button Remote Transmitter compatible with NICE Motors.

The Small Remote controller allows for the control of Two motors or two different actions on the same motor, with Rolling Codes the remotes ensure your home is protected.

The Remote comes with a key ring to allow you to attach them to your house keys, and comes in an assortment of colours to match your needs.

This product is compatible with the following;

Product Available on Backorder with dispatch in approx. 3-5 business days.

20 in stock

SKU: NICE-GATES-ON2E Categories: , , Tags: ,

Description

NICE

NICE

Quick Comparison

SettingsNICE 2 Channel Transmitter removeFIBARO D/W Sensor 2 (Beige) removeNICE ROBUS400 Gate Kit removeAEOTEC TriSensor removeDOME Z-Wave D/W Sensor removeNICE Solar Power Kit remove
Image
SKUNICE-GATES-ON2EDHS-SNS-DW-FIB-LB-02NICE-GATES-RB400OZKITDHS-SNS-MS-AEO-03DHS-SNS-DW-DOM-01NICE-GATES-SYKCE
Rating
Price$62.99$72.99$1,249.95$64.99$43.99$1,100.00
Stock

20 in stock

Out of stock

20 in stock

Out of stock

1 in stock

20 in stock

Availability20 in stockOut of stock20 in stockOut of stock1 in stock20 in stock
Add to cart

Add to basket

Read more

Add to basket

Read more

Add to basket

Add to basket

DescriptionA Two Button Remote Transmitter compatible with NICE Motors. The Small Remote controller allows for the control of Two motors or two different actions on the same motor, with Rolling Codes the remotes ensure your home is protected. The Remote comes with a key ring to allow you to attach them to your house keys, and comes in an assortment of colours to match your needs. This product is compatible with the following; Product Available on Backorder with dispatch in approx. 3-5 business days.The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification
The Beige D/W sensor is the device in the middle in this products thumbnail.
sliding gates ROBUS The ROBUS400 is a 24V DC sliding gate operator with built in control unit and OXI plug-in receiver. For sliding gates weighing up to 400 kg (RB400). Product Kit Contents:
  • 1 X ROBUS400 Gate Motor
  • 2 X INTI2 Transmitters
  • 1 X OXIBD Receiver
  • 4 X 1 Meter
The ROBUS400 Gate motor is fully compatible with Fibaro HC3
Product Available on Backorder with dispatch in approx. 3-5 business days.
TriSensorP Three different sensors built into the AEOTEC TriSensor's small finish. A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters. sensor functionalityInstall it on garage doors, closet doors, medicine cabinet doors, and all the windows in your home and get a reminder or sound an alarm when you’ve left anything open. Protect yourself from danger or an invasion of privacy, and find out when someone is snooping around. The Dome Z-Wave D/W Sensor can automate the lights to your doors and windows, and turn them off when you leave the room. Sleek, modern design, and battery operation, means you can install the long-range Dome Z-Wave D/W Sensor anywhere. Use with almost any Z-Wave Hub including Wink, Home Seer, SmartThings, Vera, Harmony and more.ROBUS solar A Solar Power kit for NICE Products, the kit contains the following components;
  • 1 X Photovoltaic panel for 24V Supply
  • 1 X 24V Battery Box
  • Cables and connectors
Without the need for connections or excavations, even in the more remote locations or those difficult to accesss with mains power, the Solar Kit allows for operation even at night time thanks to the PSY24 (Battery Box), the extended energy reserves as well as low consumption of energy needed for operate NICE products allow for operation even in prolonged overcast conditions. This product is compatible with the following; Product Available on Backorder with dispatch in approx. 3-5 business days.
Content

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.

Documentation

FIBARO Z-Wave Door/Window Sensor 2 User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave binary sensor, multilevel command supported
Power
One battery, type ER 14250 1/2AA 3.6V (included)
Operation Range
Up to 30m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Temperature Measuring Accuracy
±0.5°C
Temperature Measuring Range
0 ~ 60°C
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 71mm x 18mm x 18mm
Compliance
AS/NZS 4268:2003+A1+A2
Regulatory Compliance Mark  Z1535

Product Description

User-friendly: thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires. Practical: control unit and optional PS124 buffer batteries can be connected by means of practical guided - connector. Advanced: RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cutout. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other. Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Selfdiagnosis by means of a flashing light. 8 programming levels. Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre. Sturdy: base and release in pressure die cast with easy to open handle. Silent: gear motor on bearings.   ADVANTAGES:
  • Obstacle detection system
  • Add value to your property
  • Make property more secure
  • Silent (gear motor on bearings)
  • Self-diagnosis (by means of a flashing light)
  • Automatic programming of the working times
  • Temperature sensor (adapt the motor power to the climatic conditions)

Product Support

Manuals: ⇒ Robus User Manual ⇒ NICE GATE ACCESSORIES

Technical Specification

Product Name 
RB400
Power Supply
230V AC (50/60 Hz)
Gate Speed
0.34
Torque
400 Nm
Protection Level
IP44
Operation temperature
-20 - 50°C
Weight
8kg
Dimensions (mm)
330x195x277

Product Description

Motion sensor Motion sensor. Motion for security. Motion for presence. Motion for management. The AEOTEC TriSensor is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data. The AEOTEC TriSensor makes your home automation system more powerful and more intelligent. Temperature sensor. From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The AEOTEC TriSensor provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 °C and reporting those temperature changes back to a smart home gateway. Light sensor. Automated lighting is only as smart as the system that powers it. With the AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor is the smarts behind smart lighting. The perfect sensor comes with the perfect accessories. The AEOTEC TriSensor has three different accessories, each designed to make the installation of the sensor perfect for your home. Place it anywhere. Installation Recessor. (sold separately) Install the AEOTEC TriSensor in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. Discrete and for corner installations, the mounting arm allows you to rotate your AEOTEC TriSensor to best ensure motion is detected when you want it to be. Tape. Weighing only 52 grams, the AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.

Product Support

Manuals: ⇒ Aeotec TriSensor product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
1 x CR123A battery
Operation Range
Up to 150m outdoors without obstacles
Operation temperature
0 - 70 °C
Storage temperature
-10 - 80 °C
Colour
White
Weight
52g
Housing
ABS
Dimensions
45mm x 45mm x 35mm
Compliance
Z-Wave Plus certified
Warranty 12 Months
The DOME Z-Wave D/W Sensor is a Z-Wave Plus (500 series) compatible, battery-powered sensor designed for security and lighting automation applications. This sensor can be configured to alert you when it detects a motion and/or to trigger a siren in your Z-Wave network to scare off an intruder. Meanwhile, the built-in ambient light sensor allows this device to not only turn on your lights when you enter a room but also to automatically dim them to an appropriate level. This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controllers including:

Product Support

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave Binary sensor
Power
1 x CR123 3.0V battery (included)
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
5 ~ 40 °C
Storage temperature
-10 ~ 50 °C
Weight
50g
Dimensions
65mm
Housing
ABS

Product Support

Manuals

Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information