thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires.
Practical:
control unit and optional PS124 buffer batteries can be connected by means of practical guided – connector.
Advanced:
RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cutout. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent:
thanks to the obstacle detection system and automatic programming of the working times. Selfdiagnosis by means of a flashing light. 8 programming levels.
Safe:
acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.
Sturdy:
base and release in pressure die cast with easy to open handle.
Silent:
gear motor on bearings.
ADVANTAGES:
Obstacle detection system
Add value to your property
Make property more secure
Silent (gear motor on bearings)
Self-diagnosis (by means of a flashing light)
Automatic programming of the working times
Temperature sensor (adapt the motor power to the climatic conditions)
The?ROBUS400?is a 24V DC sliding gate operator with built in control unit and OXI plug-in receiver.?For sliding gates weighing up to 400 kg (RB400).
Product Kit Contents:
1 X?ROBUS400 Gate Motor
2 X INTI2 Transmitters
1 X OXIBD Receiver
4 X 1 Meter
The ROBUS400 Gate motor is fully compatible with?Fibaro HC3
Product Available on Backorder with dispatch in approx. 3-5 business days.
Three different sensors built into the?AEOTEC TriSensor's?small finish.
A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters.
The Active Infrared Sensor is part of the sensors family that creates an invisible infrared beam between the two units which can be placed up to 20 metres apart. The trigger activates when someone or something moves through and breaks the beam. This sensor can be connected with any binary Z-Wave sensor to be a part of the Z-Wave ecosystem.
Ideal for nursing care of the elderly, monitoring of children's movements, monitoring doorways, windows, detering and warning of unwanted intruders etc.
Please note:?Power supply 12V is required.
A Backup Battery for NICE WALKY Model Gate Motors
This product is compatible with the following;
Product Available on Backorder with dispatch in approx. 3-5 business days.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
Content
Product Description
User-friendly:
thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires.
Practical:
control unit and optional PS124 buffer batteries can be connected by means of practical guided - connector.
Advanced:
RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cutout. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent:
thanks to the obstacle detection system and automatic programming of the working times. Selfdiagnosis by means of a flashing light. 8 programming levels.
Safe:
acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.
Sturdy:
base and release in pressure die cast with easy to open handle.
Silent:
gear motor on bearings.
ADVANTAGES:
Obstacle detection system
Add value to your property
Make property more secure
Silent (gear motor on bearings)
Self-diagnosis (by means of a flashing light)
Automatic programming of the working times
Temperature sensor (adapt the motor power to the climatic conditions)
Motion sensor
Motion sensor. Motion for security. Motion for presence. Motion for management. The?AEOTEC TriSensor?is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data.
The?AEOTEC TriSensor?makes your home automation system more powerful and more intelligent.
Temperature sensor.
From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The?AEOTEC TriSensor?provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 ?C and reporting those temperature changes back to a smart home gateway.
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor?is the smarts behind smart lighting.
The perfect sensor comes with the perfect accessories. The?AEOTEC TriSensor?has three different accessories, each designed to make the installation of the sensor perfect for your home.
Place it anywhere.
Recessor.?(sold separately)
Install the?AEOTEC TriSensor?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC TriSensor to best ensure motion is detected when you want it to be.
Tape.
Weighing only 52 grams, the?AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Three different sensors built into the?AEOTEC TriSensor's?small finish.
A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters.
A Backup Battery for NICE WALKY Model Gate Motors
This product is compatible with the following;
Recessor.?(
