NICE Solar Power Kit

$1,100.00

Availability: In Stock

ROBUS solar

A Solar Power kit for NICE Products, the kit contains the following components;

  • 1 X Photovoltaic panel for 24V Supply
  • 1 X 24V Battery Box
  • Cables and connectors

Without the need for connections or excavations, even in the more remote locations or those difficult to accesss with mains power, the Solar Kit allows for operation even at night time thanks to the PSY24 (Battery Box), the extended energy reserves as well as low consumption of energy needed for operate NICE products allow for operation even in prolonged overcast conditions.

This product is compatible with the following;

Product Available on Backorder with dispatch in approx. 3-5 business days.

20 in stock

SKU: NICE-GATES-SYKCE Categories: , Tags: ,

Description

Product Support

Manuals

Quick Comparison

SettingsNICE Solar Power Kit removeDHS Garage Roller Limit Switch removeAEOTEC TriSensor removeFIBARO Z-Wave Multi Sensor removeFIBARO D/W Sensor 2 (Brown3) removeAEOTEC MultiSensor Recessor remove
Image Fibaro DW Sensor 2 Universal1
SKUNICE-GATES-SYKCEDHS-SNS-LS-DHS-01DHS-SNS-MS-AEO-03DHS-SNS-MS-FIBDHS-SNS-DW-FIB-BR3-02DHS-SNS-MS-AEO-REC
Rating
Price$1,100.00$19.99$74.99$84.99$73.99$24.99
Stock

20 in stock

2 in stock

Out of stock

Out of stock

9 in stock

2 in stock

Availability20 in stock2 in stockOut of stockOut of stock9 in stock2 in stock
Add to cart

Add to basket

Add to basket

Read more

Read more

Add to basket

Add to basket

DescriptionROBUS solar A Solar Power kit for NICE Products, the kit contains the following components;
  • 1 X Photovoltaic panel for 24V Supply
  • 1 X 24V Battery Box
  • Cables and connectors
Without the need for connections or excavations, even in the more remote locations or those difficult to accesss with mains power, the Solar Kit allows for operation even at night time thanks to the PSY24 (Battery Box), the extended energy reserves as well as low consumption of energy needed for operate NICE products allow for operation even in prolonged overcast conditions. This product is compatible with the following; Product Available on Backorder with dispatch in approx. 3-5 business days.
The?DHS Garage Roller Limit Switch can be connected with any binary Z-Wave sensors such as the?FIBARO Z-Wave Door/Window Sensor?to report the status of your garage door to your Z-Wave gateway. Roller Limit SwitchRoller Limit Switch ActionRoller Limit Switch 2 Note:?A Z-Wave sensor is not included with this device.TriSensorP Three different sensors built into the?AEOTEC TriSensor's?small finish. A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters. sensor functionalityThe Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification
The?Brown3?D/W sensor is the device on the far right in this products thumbnail.
Smart sensors. Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the?AEOTEC MultiSensor 6?and?AEOTEC TriSensor?allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle. ZW100a?DSE010aDSE010c
Content

Product Support

Manuals

The?DHS Garage Roller Limit Switch?is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.

Technical Specifications

Product Name?
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20?C to 70?C
Service life Mechanically: 10,000,000 operations min.
Net?Weight
100g
Housing
ABS, aluminium
Size?
10.5 x 2.8 x 3cm

Product Description

Motion sensor Motion sensor. Motion for security. Motion for presence. Motion for management. The?AEOTEC TriSensor?is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data. The?AEOTEC TriSensor?makes your home automation system more powerful and more intelligent. Temperature sensor. From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The?AEOTEC TriSensor?provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 ?C and reporting those temperature changes back to a smart home gateway. Light sensor. Automated lighting is only as smart as the system that powers it. With the?AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor?is the smarts behind smart lighting. The perfect sensor comes with the perfect accessories. The?AEOTEC TriSensor?has three different accessories, each designed to make the installation of the sensor perfect for your home. Place it anywhere. Installation Recessor.?(sold separately) Install the?AEOTEC TriSensor?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC TriSensor to best ensure motion is detected when you want it to be. Tape. Weighing only 52 grams, the?AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.

Product Support

Manuals: ? Aeotec TriSensor product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
1 x CR123A battery
Operation Range
Up to 150m outdoors without obstacles
Operation temperature
0 - 70 ?C
Storage temperature
-10 - 80 ?C
Colour
White
Weight
52g
Housing
ABS
Dimensions
45mm x 45mm x 35mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Details

  • Compatible with any Z-Wave controller.
  • Detects motion using a passive IR sensor.
  • Measures the temperature.
  • Measures the light intensity.
  • Easy installation on a wall or any surface.
  • Protected against tampering and theft - once vibrations are detected, the notification is sent to the main controller.
  • Alarms of movement and temperature are signalled by LED diode blinking.
  • Simple earthquake detector mode.

Technical Specifications

Product Name?
FIBARO MOTION SENSOR FGMS-001 V2.4
Battery Type
CR123A battery, 3.6 VDC
Operation Range
30m
Light Intensity Measuring Range:
0-32000 LUX
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0,4W
Operation temperature
0 - 50C*
Measured temperature range -20 to 100C
Temperature measuring accuracy
0,5 C
Housing
ABS
Size?(Diameter)
44 mm
       

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.

Documentation

FIBARO Z-Wave Door/Window Sensor 2 User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z?Wave device type
Z-Wave binary sensor, multilevel command supported
Power
One battery, type ER 14250 1/2AA 3.6V (included)
Operation Range
Up to 30m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 40 ?C
Temperature Measuring Accuracy
?0.5?C
Temperature Measuring Range
0 ~ 60?C
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 71mm x 18mm x 18mm
Compliance
AS/NZS 4268:2003+A1+A2
Regulatory Compliance Mark ?Z1535

Product Description

Still perfectly powered. Whichever power method you?re using with your multi-sensor, you can keep on using it with the?AEOTEC Recessor. The?AEOTEC Recessor?has been designed to allow for each sensor?s batteries to still easily be changed, or for the?AEOTEC MultiSensor 6?s optional power cable to be used if you prefer to power your sensor without batteries. aeotec multisensor 6 recessor a Still precise. The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor. Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them. aeotec multisensor 6 recessor

Product Support

The? perfect accessories. The?AEOTEC MultiSensor 6?ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home. ZW100d Recessor. Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm.?(sold separately) Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?. USB cable.?(sold separately) After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable. Tape. Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M. Manuals: ? Aeotec Multisensor 6 product manual

Technical Specification

Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 86mm x 86mm x 43mm
Warranty 12 Months
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information