Ideal for?pedestrian gates mode of Wood or PVC, recommended for small posts (width 8cm)
Practical:
The articulated arm enables installation in specific conditions, such as in the presence of small walls, or obstacles adjacent to the post to allow for the full arc of opening even in enclosed spaces.
Quick:
With the ability to shorten the actuator arm of the gate, you can ensure your gate opens in the quickest time possible, with the reduced arm length its only a 7 second wait for the gate to fully open.
Convenient:
With the ability to incorporate a flashing LED indicator and courtesy light function, ensuring the safe operation of your gate at all times of day was never easier.
The Motor also comes with a rapid motor release for manual gate movement.
No Black Out:
Even if you do have a power outage the Gate accepts optional batteries that are housed inside the gear motor, allowing your remotes to operate your gates even if the rest of your house is unpowered.
Built-in control unit:
The WALKY1024 comes with a built in control unit allowing for;
Simple Programming
Automatic memorization of limit switches on opening and closing, with an added self-learning function
Automatic fault diagnostics
Programming of pause time
Pedestrian pass door
Deceleration on opening and closing
Provisiong for connection of latest generation resistive senstive edges.
Product Available on Backorder with dispatch in approx. 3-5 business days.
The?DHS Garage Press Limit Switch can be connected with any binary Z-Wave sensors such as the?FIBARO Z-Wave Door/Window Sensor?to report the status of your garage door to your Z-Wave gateway.
Note:?A Z-Wave sensor is not included with this device.
The?ROBUS400?is a 24V DC sliding gate operator with built in control unit and OXI plug-in receiver.?For sliding gates weighing up to 400 kg (RB400).
Product Kit Contents:
1 X?ROBUS400 Gate Motor
2 X INTI2 Transmitters
1 X OXIBD Receiver
4 X 1 Meter
The ROBUS400 Gate motor is fully compatible with?Fibaro HC3
Product Available on Backorder with dispatch in approx. 3-5 business days.
Smart sensors.
Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the?AEOTEC MultiSensor 6?and?AEOTEC TriSensor?allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.
?
The?YALE Assure Z-Wave Module (only)?for?YALE Assure Digital Deadbolts YRD256/YRD426/YRD446.
Share up to 5 digital keys using the Yale App
Holds up to 12 unique PIN codes
Locks automatically after a short period
Uses the new Z-Wave 500 series chip
Forget carrying around keys; lock and unlock your home with your smartphone. Share digital keys with friends and family, view access history and manage user settings, all from your Yale Assure app.
Controlled via the Yale Assure App, Yale?s ?Twist and Go? function allows users the unique ability to unlock their door by twisting their smart phone when within Bluetooth range. The ?Twist and Go? feature protects you and your family from unintended unlocking. Also offering a backlit touch screen keypad, users have the option of entering a PIN code to unlock the door.
An automatic Re-lock function is available so that when the latch is retracted, the lock will automatically lock after a specified period of time.?For those times when you don't have your smartphone on you, unlock by entering your unique 4-8 digit pin code on the touchscreen keypad.
A Two Button Remote Transmitter compatible with NICE Motors.
The Small Remote controller allows for the control of Two motors or two different actions on the same motor, with Rolling Codes the remotes ensure your home is protected.
The Remote comes with a key ring to allow you to attach them to your house keys, and comes in an assortment of colours to match your needs.
This product is compatible with the following;
Product Available on Backorder with dispatch in approx. 3-5 business days.
Content
Product Description
Ultra Compact:
Ideal for?pedestrian gates mode of Wood or PVC, recommended for small posts (width 8cm)
Practical:
The articulated arm enables installation in specific conditions, such as in the presence of small walls, or obstacles adjacent to the post to allow for the full arc of opening even in enclosed spaces.
Quick:
With the ability to shorten the actuator arm of the gate, you can ensure your gate opens in the quickest time possible, with the reduced arm length its only a 7 second wait for the gate to fully open.
Convenient:
With the ability to incorporate a flashing LED indicator and courtesy light function, ensuring the safe operation of your gate at all times of day was never easier.
The Motor also comes with a rapid motor release for manual gate movement.
No Black Out:
Even if you do have a power outage the Gate accepts optional batteries that are housed inside the gear motor, allowing your remotes to operate your gates even if the rest of your house is unpowered.
Built-in control unit:
The WALKY1024 comes with a built in control unit allowing for;
Simple Programming
Automatic memorization of limit switches on opening and closing, with an added self-learning function
Automatic fault diagnostics
Programming of pause time
Pedestrian pass door
Deceleration on opening and closing
Provisiong for connection of latest generation resistive senstive edges.
The?DHS Garage Press Limit Switch?is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.
Technical Specifications
Product Name?
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20?C to 70?C
Service life
Mechanically: 10,000,000 operations min.
Net?Weight
100g
Housing
ABS, aluminium
Size?
10.5 x 2.8 x 3cm
Product Description
User-friendly:
thanks to the BlueBUS system, allowing the control unit to be connected to up to 7 pairs of photocells and control, security and signalling devices with just two wires.
Practical:
control unit and optional PS124 buffer batteries can be connected by means of practical guided - connector.
Advanced:
RB400, RB600 and RB1000 are equipped with a temperature sensor: adapt the motor power to the climatic conditions and at the same time thermal cutout. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent:
thanks to the obstacle detection system and automatic programming of the working times. Selfdiagnosis by means of a flashing light. 8 programming levels.
Safe:
acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.
Sturdy:
base and release in pressure die cast with easy to open handle.
Silent:
gear motor on bearings.
ADVANTAGES:
Obstacle detection system
Add value to your property
Make property more secure
Silent (gear motor on bearings)
Self-diagnosis (by means of a flashing light)
Automatic programming of the working times
Temperature sensor (adapt the motor power to the climatic conditions)
Still perfectly powered.
Whichever power method you?re using with your multi-sensor, you can keep on using it with the?AEOTEC Recessor.
The?AEOTEC Recessor?has been designed to allow for each sensor?s batteries to still easily be changed, or for the?AEOTEC MultiSensor 6?s optional power cable to be used if you prefer to power your sensor without batteries.
Still precise.
The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them.
Product Support
The? perfect accessories. The?AEOTEC MultiSensor 6?ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.
Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.?(sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?.
USB cable.?(sold separately)
After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M.
Manuals:? Aeotec Multisensor 6 product manual
Technical Specification
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 86mm x 86mm x 43mm
Warranty
12 Months
Product Description
Adds Z-wave connectivity to compatible Yale Real Living locks. Must be paired with a Z-wave controller (sold separately) in order to add remote control and access functionality to your Yale lock.
Compatible with Yale deadbolts available in Australia and New Zealand via official Assa Abloy re-sellers and installers.Compatible with Yale Assure Locks: YRD256, YRD426, YRD446.
Not compatible with Yale NexTouch Locks. Also not compatible with Apple Home Kit.
Forget carrying around keys; lock and unlock your home with your smartphone.
Share digital keys with friends and family, view access history and manage user settings, all from your Smart Phone.
The?Yale Assure Digital Deadbolt (with key)?is designed for seamless integration with any Z-Wave product or automated control systems allowing you to monitor the status of this device and usage through a centralised controller. Please note when Z-Wave module is enabled Bluetooth is disabled and vice versa.
The best integrated Z-Wave Home Automation controller for?Yale Assure Digital Deadbolt?is VeraEdge/Plus. You'll get full control of??Yale Assure Digital Deadbolt?functionality including remote access.
?
Product Support
IMPORTANT:Below is all the information you need to connect your YALE Assure Digital Deadbolt to a Vera system.How to connect the systems:? On the Vera Dashboard select 'Add Device' (keep the lock in close proximity during inclusion and extend inclusion time for 60 sec)??Select 'Door Locks' > 'Yale Touchscreen Deadbolt Assure Lock (YRD226/YRD246)'??If the lock is new set a new master code as detailed below, otherwise click 'Next' on Vera.How to set up the Master Code: ???Wake up the lock by placing your hand on the touch screen.??Press the gear key in the lower right corner of the keypad.??Press 1 followed by the?gear?key.??Enter your new 4-8 digit master code followed by the gear key.? Click 'Next' on the Vera user interface.To Include the lock in the Z-Wave network follow the instructions below? Wake up the lock by placing your hand on the touch screen.??Enter your master code followed by the gear key.
??Press 7 followed by the gear key.
??Press 1 followed by the gear key.
? The lock will play a 3 tone sound to indicate that the inclusion procedure has been completed.
??Click 'Exit'.
Your lock is now added to your Vera system and should appear on the devices page.
The?ROBUS400?is a 24V DC sliding gate operator with built in control unit and OXI plug-in receiver.?For sliding gates weighing up to 400 kg (RB400).
Product Kit Contents:
?
Forget carrying around keys; lock and unlock your home with your smartphone. Share digital keys with friends and family, view access history and manage user settings, all from your Yale Assure app.
Controlled via the Yale Assure App, Yale?s ?Twist and Go? function allows users the unique ability to unlock their door by twisting their smart phone when within Bluetooth range. The ?Twist and Go? feature protects you and your family from unintended unlocking. Also offering a backlit touch screen keypad, users have the option of entering a PIN code to unlock the door.
An automatic Re-lock function is available so that when the latch is retracted, the lock will automatically lock after a specified period of time.?For those times when you don't have your smartphone on you, unlock by entering your unique 4-8 digit pin code on the touchscreen keypad.
Still precise.
The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them.
Recessor.
Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.?(sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?.
USB cable.?(sold separately)
After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M.
Manuals:
The?Yale Assure Digital Deadbolt (with key)?is designed for seamless integration with any Z-Wave product or automated control systems allowing you to monitor the status of this device and usage through a centralised controller. Please note when Z-Wave module is enabled Bluetooth is disabled and vice versa.
The best integrated Z-Wave Home Automation controller for?Yale Assure Digital Deadbolt?is VeraEdge/Plus. You'll get full control of??Yale Assure Digital Deadbolt?functionality including remote access.
?
