At less than 0.4? in width some might call it small and compact. We prefer to call it invisible. It?s the Z-Wave door sensor that?s been designed as the door sensor should have always been. Powerful but invisible. Recessed Door Sensor is a clever piece of technology that installs simply within your door?s frame. It?s as beautiful as the rest of your home. You never see it; you just feel its benefits.
Perfect sensor.
Perfect compatibility. With its foundation resting upon Z-Wave Plus, the Recessed Door Sensor is compatible with leading Z-Wave gateways and backends out of the box.
Z-Wave Plus V2 Door Sensor, built on the Aeotec 700 series, will deliver a significantly improved experience by mandating the inclusion of SmartStart, a setup feature that will truly bring plug and play to your smart home. Comprised of two parts: the Main Sensor and the Magnetic Sensor. Comprised of two parts: the Main Sensor and the Magnetic Sensor.
Changing the battery is as simple as lifting Recessed Door Sensor out of your door, swapping the battery, and inserting the sensor back into your door.
Perfect wireless.
Security sensors have to be dependable. Recessed Door Sensor is. Its wireless communication range reaches Z-Wave?s maximum: up to 150 metres / 492 feet when unobstructed.
Gen7.
A security sensor has to be secure. Recessed Door Sensor couples Z-Wave Plus with Aeotec?s Gen5. That enables the sensor to utilise AES 128-bit communication encryption in order to secure your home.
Z-Wave Plus.
Furthering your ability to depend upon it, the Recessed Door Sensor is built upon the latest version of Z-Wave, Z-Wave Plus. That enables the sensor to communicate 250% faster and with 50% less battery use than older sensors.
Smart Door Senor- Removing the complexity of installation, with a quick app scan of its QR code, drastically shortening and simplifying the product setup process for you.
Safer than the previous generation. Comes with Z-Wave Security 2 (S2) framework which is the most advanced security for smart home devices and controllers, gateways and hubs in the market today, it?s better to protect your family.
Product Support
Anytime and anywhere, giving you a full sense of security. Compatible with Fibaro HC3, Fibaro HC3Lite, Yubii, Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more.
Frequency: 921.42 MHz
The Z-Wave door sensor is finally invisible.
At less than 0.4? in width some might call it small and compact. We prefer to call it invisible. It?s the Z-Wave door sensor that?s been designed as the door sensor should have always been. Powerful but invisible. Recessed Door Sensor is a clever piece of technology that installs simply within your door?s frame. It?s as beautiful as the rest of your home. You never see it; you just feel its benefits.
Perfect sensor.
Perfect compatibility. With its foundation resting upon Z-Wave Plus, the Recessed Door Sensor is compatible with leading Z-Wave gateways and backends out of the box.
Z-Wave Plus V2 Door Sensor, built on the Aeotec 700 series, will deliver a significantly improved experience by mandating the inclusion of SmartStart, a setup feature that will truly bring plug and play to your smart home. Comprised of two parts: the Main Sensor and the Magnetic Sensor. Comprised of two parts: the Main Sensor and the Magnetic Sensor.
The Aeotec Z-Stick (Gen 5) is a self-powered Z-Wave USB dongle with portable push-button inclusion for Z-Wave devices (independent from external power and host microprocessor). When attached to a host processor (PC etc), it becomes a Z-Wave communication device, which allows Z-Wave software to communicate with your Z-Wave devices.
The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controllers outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you?ll be amazed at just how much functionality we were able to craft inside.
Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don?t. But perfect lighting has never been easy.
Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you?ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you?re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache.
No more. Nano Dimmer offers smart, connected lighting without any of the hassles.
The Aeotec Smart Button Works with SmartThings enables convenient control of connected devices like lights electronics and appliances - simply setup which smart devices you would like your Smart Button to control using the SmartThings app.
The?DHS Garage Press Limit Switch can be connected with any binary Z-Wave sensors such as the?FIBARO Z-Wave Door/Window Sensor?to report the status of your garage door to your Z-Wave gateway.
Note:?A Z-Wave sensor is not included with this device.
Motion for security. Motion for presence. Motion for management. The?AETOEC MultiSensor 6?is perfect for more than just an intelligent security system. With a 5 metre range and a 120? field of view, the?AEOTEC MultiSensor 6?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data ? the?AEOTEC MultiSensor 6?makes your home automation system more powerful and more intelligent.
Content
Product Description
2+ year battery life.
Changing the battery is as simple as lifting Recessed Door Sensor out of your door, swapping the battery, and inserting the sensor back into your door.
Perfect wireless.
Security sensors have to be dependable. Recessed Door Sensor is. Its wireless communication range reaches Z-Wave?s maximum: up to 150 metres / 492 feet when unobstructed.
Gen7.
A security sensor has to be secure. Recessed Door Sensor couples Z-Wave Plus with Aeotec?s Gen5. That enables the sensor to utilise AES 128-bit communication encryption in order to secure your home.
Z-Wave Plus.
Furthering your ability to depend upon it, the Recessed Door Sensor is built upon the latest version of Z-Wave, Z-Wave Plus. That enables the sensor to communicate 250% faster and with 50% less battery use than older sensors.
Smart Door Senor- Removing the complexity of installation, with a quick app scan of its QR code, drastically shortening and simplifying the product setup process for you.
Safer than the previous generation. Comes with Z-Wave Security 2 (S2) framework which is the most advanced security for smart home devices and controllers, gateways and hubs in the market today, it?s better to protect your family.
Product Support
Anytime and anywhere, giving you a full sense of security. Compatible with Fibaro HC3, Fibaro HC3Lite, Yubii, Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more.
Frequency: 921.42 MHz
Manuals:?? Aeotec Recessed Door Sensor Gen7 product manuals
Technical Specifications
RF Protocol
Z-Wave Plus (700 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Binary sensor
Power
3 V DC,?CR123A
Operation Range
Up to 150m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
white
Weight
50g
Housing
ABS
Size
43mm x 40mm x 16mm
Compliance
Z-Wave Plus certified
Warranty
12 Months
Product Description
Create your own Z-Wave gateway. With Z-Stick Gen5 you?ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. You?ll benefit from a system that is locally hosted and cloud-free, whose features, security and privacy you can personally control, and you?ll be able to create your Z-Wave network at your own pace and within your own budget. Capable of controlling up to 232 different Z-Wave devices, including those that use the more advanced Z-Wave Plus, and able to run on both full-powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with open source software such as Domoticz, Home Assistant, OpenHab, and OpenHab2 and also works with commercially available software such as Axial Control, Homeseer, Indigo for MacOS. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.
Product Support
Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.
Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices.
Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wireless firmware upgrades. Compatible with Z-Wave enabled home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2.
No software included.
Manuals:? Aeotec Z-Stick Gen5p product manual
Technical Specification
RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave controller
Power
USB DC 4.75V to 5.25V
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
20g
Housing
ABS
Dimensions
(LxWxH) 1.1 x 0.4 x 3.5 inches
Compliance
Z-Wave Plus certified
Warranty
12 Months
Product Description
Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them.
All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.
PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS:
Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using Zellweger equipment?or similar onto their distribution networks in order to remotely control devices such as off-peak hot water systems and street lighting, although other areas within Australia also use this technology. Not all properties are affected by ripple control, so just because you might live in one of these areas, does not mean that you will have these problems.
Ripple injection control systems work by superimposing coded control signals, commonly 750Hz or 1050Hz on the 50 Hz mains supply.
Some electrical appliances such as fans, dimmers, toasters and LED lighting can be sensitive to this ripple control signal. The results could be audible buzzing noises from fans or flickering lights whenever the ripple control signals are present.
Electricity suppliers are advising users to install appropriate?ripple signal filters in such areas.
The ripple signal filter is a tuned passive inline filter that completely eliminates the superimposed ripple injection control signal from the normal mains supply to produce a noise-free filtered mains supply which can then be connected to the electrical appliances or light control systems. The ripple signal filter is specifically tuned to eliminate the ripple control signal frequency of 750Hz or 1050Hz.
However, we can?t guarantee the ripple signal filter always will help you if you experiencing such issues. Please contact your local energy provider to get more information and proposed solutions for your electrical installation.
If you are getting similar problems with your dimmers and fans and it?s not Ripple Control Signal and you are hearing the tones at random times of the day, your electrical supply may be affected by harmonics; a power fluctuation that is not part of the normal electricity supply or ripple control signal output.
Harmonics are caused by interference created by other equipment on the network, such as inverter type air conditioners and switch-mode power supplies for computers.
The offending appliances may be in your home or other premises on the local power grid. If you are being affected by network harmonics, it may be of benefit to transfer the electricity supply to your premises to a different phase in the street. This is something you will need to discuss with your electrical company.
We are strongly recommending for the areas we have mentioned above to run tests with only a few dimmers before committing for high volumes. If results are not fully OK you may use relays only instead of dimmers.Please note that our warranty for the faulty devices is not covering above-mentioned conditions with your local electric grids.
Please see affected with Ripple Signalling areas here:
QUEENSLAND
Only Southern Queensland (Energex) has Ripple Signalling.
The Frequency is 1050Hz.
The rest of Queensland (Ergon) does not have Ripple Signalling.
The Aeotec Smart Button Works with SmartThings enables convenient control of connected devices like lights electronics and appliances - simply setup which smart devices you would like your Smart Button to control using the SmartThings app.
The?DHS Garage Press Limit Switch?is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.
Technical Specifications
Product Name?
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20?C to 70?C
Service life
Mechanically: 10,000,000 operations min.
Net?Weight
100g
Housing
ABS, aluminium
Size?
10.5 x 2.8 x 3cm
Product Description
Motion sensor.
Motion sensor. Motion for security. Motion for presence. Motion for management. The?AEOTEC MultiSensor 6?is perfect for more than just an intelligent security system. With a 5 metre range and a 120? field of view, the?AEOTEC MultiSensor 6?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data ? the?AEOTEC MultiSensor 6?makes your home automation system more powerful and more intelligent.
Temperature sensor.
From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The?AEOTEC MultiSensor 6?provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50?C (14 to 122?F) and reporting temperature changes back to a smart home gateway.
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC MultiSensor 6?s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC MultiSensor 6?is the smarts behind smart lighting.
Humidity sensor.
Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. The?AEOTEC MultiSensor 6 offers incremental monitoring of humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. The?AEOTEC MultiSensor 6?monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.
Vibration sensor.
It measures the environment it?s in, and it also measures itself. The AEOTEC MultiSensor 6?contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the?AEOTEC MultiSensor 6?? it?ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They?ll also be able to detect seismic activity within your home.
UV sensor.
Perfectly managing an environment means understanding it perfectly. The?AEOTEC MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured in line with the World Health Organisation?s UV Index, the?AEOTEC MultiSensor 6?measures a room?s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.
Product Support
The perfect sensor comes with the perfect accessories. The?AEOTEC MultiSensor 6?has four different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.?(sold separately)
Install the?AEOTEC MultiSensor 6?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC MultiSensor 6?up to 360? and refine its field of view by up to 50?.
USB cable.
After 2 years you won?t have to change batteries if you power your?AEOTEC MultiSensor 6?via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6 can be easily installed with just the provided double-sided tape from 3M.
Manuals:? Aeotec Multisensor 6 product manual
All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.
PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS:
Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using 
NSW
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC MultiSensor 6?s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC MultiSensor 6?is the smarts behind smart lighting.
Humidity sensor.
Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. The?AEOTEC MultiSensor 6 offers incremental monitoring of humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. The?AEOTEC MultiSensor 6?monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.
Vibration sensor.
It measures the environment it?s in, and it also measures itself. The AEOTEC MultiSensor 6?contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the?AEOTEC MultiSensor 6?? it?ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They?ll also be able to detect seismic activity within your home.
UV sensor.
Perfectly managing an environment means understanding it perfectly. The?AEOTEC MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured in line with the World Health Organisation?s UV Index, the?AEOTEC MultiSensor 6?measures a room?s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.
Recessor.?(sold separately)
Install the?AEOTEC MultiSensor 6?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC MultiSensor 6?up to 360? and refine its field of view by up to 50?.
USB cable.
After 2 years you won?t have to change batteries if you power your?AEOTEC MultiSensor 6?via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6 can be easily installed with just the provided double-sided tape from 3M.
Manuals:
