The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
The?Beige D/W sensor is the device in the middle in this products thumbnail.
Smart sensors.
Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the?AEOTEC MultiSensor 6?and?AEOTEC TriSensor?allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.
?
The Aeotec Multipurpose Works with SmartThings sensor enables you to receive alerts when a door or window is opened or closed and monitor the temperature in a room. In addition youll be able to set connected smart devices such as lights to power on and off as you open doors windows or cabinets - or when the temperature reaches a set level. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
Three different sensors built into the?AEOTEC TriSensor's?small finish.
A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters.
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.
Content
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Still perfectly powered.
Whichever power method you?re using with your multi-sensor, you can keep on using it with the?AEOTEC Recessor.
The?AEOTEC Recessor?has been designed to allow for each sensor?s batteries to still easily be changed, or for the?AEOTEC MultiSensor 6?s optional power cable to be used if you prefer to power your sensor without batteries.
Still precise.
The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them.
Product Support
The? perfect accessories. The?AEOTEC MultiSensor 6?ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.
Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.?(sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?.
USB cable.?(sold separately)
After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M.
Manuals:? Aeotec Multisensor 6 product manual
Technical Specification
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 86mm x 86mm x 43mm
Warranty
12 Months
The Aeotec Multipurpose Works with SmartThings sensor enables you to receive alerts when a door or window is opened or closed and monitor the temperature in a room. In addition youll be able to set connected smart devices such as lights to power on and off as you open doors windows or cabinets - or when the temperature reaches a set level. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Motion sensor
Motion sensor. Motion for security. Motion for presence. Motion for management. The?AEOTEC TriSensor?is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data.
The?AEOTEC TriSensor?makes your home automation system more powerful and more intelligent.
Temperature sensor.
From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The?AEOTEC TriSensor?provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 ?C and reporting those temperature changes back to a smart home gateway.
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor?is the smarts behind smart lighting.
The perfect sensor comes with the perfect accessories. The?AEOTEC TriSensor?has three different accessories, each designed to make the installation of the sensor perfect for your home.
Place it anywhere.
Recessor.?(sold separately)
Install the?AEOTEC TriSensor?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC TriSensor to best ensure motion is detected when you want it to be.
Tape.
Weighing only 52 grams, the?AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.