The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
Pro-tool. Pro-tection.
Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.
What Dock enhances.Monitor 2 areas.
Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.
Monitor a whole area.
Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).
A flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening an NC contact.
The device has built in temperature sensor, monitoring the temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by a connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signals in case of substantial inundation of water.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
The?Brown1 D/W sensor is the device third from left in this products thumbnail.
The Aeotec Door/Window Sensor 7 is a Z-Wave Plus device for detecting if a door or window is opened or closed. Small, battery powered (included) and easily attached to virtually anything that opens or closes around your home. Door Window Sensor 7 also includes universal "dry contact" terminals allowing you to wire in other external sensors. Z-Wave Plus certified, the?AEOTEC Door/Window Sensor 7?is compatible with all certified Z-Wave gateways including Control4 (Z-Wave enabled), HomeSeer, Indigo for Mac, and Vera/Ezlo Edge/VeraPlus/VeraSecure/Athom Controllers.
It?s Aeotec's fastest sensor yet with 50% faster communication than other models. Its sensor?s enhanced sensitivity and use of Z-Wave S2 and Aeotec?s exclusive Spatial Intrusion Algorithm means that the Z-Wave wireless signals your smart home depends on are transmitted, received and processed instantly.
Maximised wireless range.
To be simple to install, it has to be wireless. To secure your home, its engineering has to be perfect. Door / Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to communicate wirelessly 50% faster and up to 67% further in real-world use.
Optimised battery life.
Wireless is convenient but having to change batteries too often is annoying. That?s why Door / Window Sensor 7 features a unique balance of hardware and software optimisations which allow it to use up to 66% less battery power to communicate via Z-Wave Plus. It?s German engineering at its very best.
Intelligent multi-sensor.
It's not just a security or an intelligence sensor - it's a 3-in-1 multipurpose sensor. Door / Window Sensor 7 features a unique layering of a contact sensor (reed switch), gyroscope and universal binary input sensor.
Secure security.
It drives your home?s security - so it needs to be secure. Door / Window Sensor 7 combines ECDH key exchange and AES-128 bit communication encryption to render man-in-the-middle and brute force hacking virtually impossible.
Shelly Humidity & Temperature Sensor H&S?Smart Home Automation WiFi Solution - Black
Shelly Humidity & Temperature Sensor?helps with monitoring changes in humidity and temperature while avoiding dryness and keeping comfortable conditions at your home.
Wireless: Connect Shelly Humidity & Temperature Sensor directly to your Wi-Fi network, without the need for any additional controller.
Humidity: Monitor excessive changes in humidity. Avoid dryness and conditions for mould growth.
Temperature control: Be aware of temperature fluctuations and keep your home comfortable at any time.
Easy to use: The only thing you need to manage your Shelly H&T is a mobile phone and the Shelly Cloud app.
Long-lasting battery: Feel more comfortable with Shelly H&T?s long-lasting battery life of up to 16 months.
With Shelly Humidity & Temperature Sensor you can see recorded data for humidity and temperature for up to a year.
USB power supply: An optional accessory that allows you to power the device with a cable instead of a battery
Monitor remotely: Monitor your home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices.
CONTROL ANY ELECTRIC HEATER
Turn the cheapest heaters into the smartest devices with?Shelly Humidity & Temperature Sensor and Shelly Plug - you can automatically control any electric heater.
365-DAY HISTORY
Shelly Humidity & Temperature Sensor records all the data for humidity and temperature.
Long-Lasting Battery Life
A perfect design combined with a battery lasting up to 16 months keeps your home always comfortable.
FOR DEVELOPERS
Shelly Humidity & Temperature Sensor (H&T) is open to the world and developers. Shellys are secured but at the same time give everyone the opportunity to use them easily in new and existing projects. With the embedded web server and the HTTP commands Shelly can be made compatible with your existing home automation system.
This product is approved for use in Australia but must be installed by a licensed electrician.
Content
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Power optimised.
Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6?s battery acts as an emergency backup.
Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don?t even have to use them. But if you do, Water Sensor 6?s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock.
Wireless optimised.
Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna.
Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges.
Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to.
In the box.
3M double side adhesive tape.
Desktop style of adapter without pins.
Dock for Water Sensor
6. Mounting screws.
Spot sensing rope x 2. USB cable for optional power supply.
? Compatible with any Z-Wave network controller,
? May be connected to any alarm system (potential-free output terminal),
? Extremely easy installation - simply put on a surface prone to flooding,
? May be installed anywhere - flood sensor?s contacts extended with a wire,
? Battery or VDC powered. When connected to an external, VDC power source, the battery serves as an emergency power source,
? Theft protection - tilt is reported to the Z-Wave network or alarm system?s main controller,
? Two operating modes - flood/temperature sensor or just a temperature sensor.
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
Keep product and batteries away from open flames and extreme heat. Avoid direct sunlight or heat exposure. Always remove all batteries from products that are being stored and not used. Batteries may damage the appliance if they leak. Do not use rechargeable batteries. Ensure correct polarity when inserting the batteries. Improper battery use may damage the product.
Door / Window Sensor 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet locations.
It contains small parts; keep away from children.?
The sensor can be mounted either on the moving part or on the fixed part of a door or a window. Mounting can be accomplished either using the tape by peeling off the protection foil or using two screws with holes inside the battery compartment. If the tilt detection on a window (only normal windows, no roof windows) shall be used the sensor device must be placed on the moving part of the window and the magnet on the window frame.
What Dock enhances.
Monitor 2 areas.
Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.
Monitor a whole area.
Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.
It?s Aeotec's fastest sensor yet with 50% faster communication than other models. Its sensor?s enhanced sensitivity and use of Z-Wave S2 and Aeotec?s exclusive Spatial Intrusion Algorithm means that the Z-Wave wireless signals your smart home depends on are transmitted, received and processed instantly.
Maximised wireless range.
To be simple to install, it has to be wireless. To secure your home, its engineering has to be perfect. Door / Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to communicate wirelessly 50% faster and up to 67% further in real-world use.
Optimised battery life.
Wireless is convenient but having to change batteries too often is annoying. That?s why Door / Window Sensor 7 features a unique balance of hardware and software optimisations which allow it to use up to 66% less battery power to communicate via Z-Wave Plus. It?s German engineering at its very best.
Intelligent multi-sensor.
It's not just a security or an intelligence sensor - it's a 3-in-1 multipurpose sensor. Door / Window Sensor 7 features a unique layering of a contact sensor (reed switch), gyroscope and universal binary input sensor.
Secure security.
It drives your home?s security - so it needs to be secure. Door / Window Sensor 7 combines ECDH key exchange and AES-128 bit communication encryption to render man-in-the-middle and brute force hacking virtually impossible.
