FIBARO D/W Sensor 2 (Brown1)

 

$72.99

Availability: In Stock

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification

The Brown1 D/W sensor is the device third from left in this products thumbnail.

6 in stock

SKU: DHS-SNS-DW-FIB-BR1-02 Categories: , , Tags: ,

Description

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.

The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.

The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.

This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capabilities by allowing it to detect the exact temperature in your home.

This product comes in multiple different colours.

After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.

Documentation

FIBARO Z-Wave Door/Window Sensor 2 User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz – AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave binary sensor, multilevel command supported
Power
One battery, type ER 14250 1/2AA 3.6V (included)
Operation Range
Up to 30m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Temperature Measuring Accuracy
±0.5°C
Temperature Measuring Range
0 ~ 60°C
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 71mm x 18mm x 18mm
Compliance
AS/NZS 4268:2003+A1+A2
Regulatory Compliance Mark  Z1535

Quick Comparison

SettingsFIBARO D/W Sensor 2 (Brown1) removeAEOTEC TriSensor removeAEOTEC D/W Sensor 7 removeQUBINO Temperature Sensor removeDHS Garage Roller Limit Switch removeFIBARO D/W Sensor 2 (White) remove
Image
SKUDHS-SNS-DW-FIB-BR1-02DHS-SNS-MS-AEO-03DHS-SNS-DW-AEO-07DHS-SNS-TMP-QUBDHS-SNS-LS-DHS-01DHS-SNS-DW-FIB-WH-02
Rating
Price$72.99$64.99$74.99$24.99$19.99$72.99
Stock

6 in stock

Out of stock

1 in stock

4 in stock

Out of stock

9 in stock

Availability6 in stockOut of stock1 in stock4 in stockOut of stock9 in stock
Add to cart

Add to basket

Read more

Add to basket

Add to basket

Read more

Add to basket

DescriptionThe FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification
The Brown1 D/W sensor is the device third from left in this products thumbnail.
TriSensorP Three different sensors built into the AEOTEC TriSensor's small finish. A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters. sensor functionalityThe Aeotec Door/Window Sensor 7 is a Z-Wave Plus device for detecting if a door or window is opened or closed. Small, battery powered (included) and easily attached to virtually anything that opens or closes around your home. Door Window Sensor 7 also includes universal "dry contact" terminals allowing you to wire in other external sensors. Z-Wave Plus certified, the AEOTEC Door/Window Sensor 7 is compatible with all certified Z-Wave gateways including Control4 (Z-Wave enabled), HomeSeer, Indigo for Mac, and Vera/Ezlo Edge/VeraPlus/VeraSecure/Athom Controllers. aeotec z wave dw sensor 7 binary aeotec z wave dw sensor 7 icon sensitivity It’s Aeotec's fastest sensor yet with 50% faster communication than other models. Its sensor’s enhanced sensitivity and use of Z-Wave S2 and Aeotec’s exclusive Spatial Intrusion Algorithm means that the Z-Wave wireless signals your smart home depends on are transmitted, received and processed instantly. aeotec z wave dw sensor 7 icon secure fast Maximised wireless range. To be simple to install, it has to be wireless. To secure your home, its engineering has to be perfect. Door / Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to communicate wirelessly 50% faster and up to 67% further in real-world use. aeotec z wave dw sensor 7 icon battery Optimised battery life. Wireless is convenient but having to change batteries too often is annoying. That’s why Door / Window Sensor 7 features a unique balance of hardware and software optimisations which allow it to use up to 66% less battery power to communicate via Z-Wave Plus. It’s German engineering at its very best. aeotec z wave dw sensor 7 icon spatial Intelligent multi-sensor. It's not just a security or an intelligence sensor - it's a 3-in-1 multipurpose sensor. Door / Window Sensor 7 features a unique layering of a contact sensor (reed switch), gyroscope and universal binary input sensor. aeotec z wave dw sensor 7 icon s2 Secure security. It drives your home’s security - so it needs to be secure. Door / Window Sensor 7 combines ECDH key exchange and AES-128 bit communication encryption to render man-in-the-middle and brute force hacking virtually impossible.The QUBINO Temperature Sensor (by GOAP) is capable of measuring temperatures between -50°C ~ 125°C with 0.5°C accuracy.
  • 1m long cable
  • Connects directly to any GOAP module
  • Integrates with; VeraEdge, VeraPlus, Zipato, NETIC
Note: This product is currently not supported by Fibaro gateways.
The DHS Garage Roller Limit Switch can be connected with any binary Z-Wave sensors such as the FIBARO Z-Wave Door/Window Sensor to report the status of your garage door to your Z-Wave gateway. Roller Limit SwitchRoller Limit Switch ActionRoller Limit Switch 2 Note: A Z-Wave sensor is not included with this device.The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
  • Completely wireless
  • Automatic software updates
  • Includes a built in temperature sensor
  • Comes in multiple colours
  • Tamper and low battery alarm notification
Content

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.

Documentation

FIBARO Z-Wave Door/Window Sensor 2 User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave binary sensor, multilevel command supported
Power
One battery, type ER 14250 1/2AA 3.6V (included)
Operation Range
Up to 30m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Temperature Measuring Accuracy
±0.5°C
Temperature Measuring Range
0 ~ 60°C
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 71mm x 18mm x 18mm
Compliance
AS/NZS 4268:2003+A1+A2
Regulatory Compliance Mark  Z1535

Product Description

Motion sensor Motion sensor. Motion for security. Motion for presence. Motion for management. The AEOTEC TriSensor is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data. The AEOTEC TriSensor makes your home automation system more powerful and more intelligent. Temperature sensor. From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The AEOTEC TriSensor provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 °C and reporting those temperature changes back to a smart home gateway. Light sensor. Automated lighting is only as smart as the system that powers it. With the AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor is the smarts behind smart lighting. The perfect sensor comes with the perfect accessories. The AEOTEC TriSensor has three different accessories, each designed to make the installation of the sensor perfect for your home. Place it anywhere. Installation Recessor. (sold separately) Install the AEOTEC TriSensor in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. Discrete and for corner installations, the mounting arm allows you to rotate your AEOTEC TriSensor to best ensure motion is detected when you want it to be. Tape. Weighing only 52 grams, the AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.

Product Support

Manuals: ⇒ Aeotec TriSensor product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
1 x CR123A battery
Operation Range
Up to 150m outdoors without obstacles
Operation temperature
0 - 70 °C
Storage temperature
-10 - 80 °C
Colour
White
Weight
52g
Housing
ABS
Dimensions
45mm x 45mm x 35mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

The technical specifications of Door / Window Sensor 7 can be viewed at that link. Package contents:
  1. Sensor Unit.
  2. Cover
  3. Big Magnet.
  4. Small Magnet.
  5. Double-Sided Tape large (×2).
  6. Double-Sided Tape small (x2).
  7. Screws (×4).
  8. Dowels( x4).

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

Keep product and batteries away from open flames and extreme heat. Avoid direct sunlight or heat exposure. Always remove all batteries from products that are being stored and not used. Batteries may damage the appliance if they leak. Do not use rechargeable batteries. Ensure correct polarity when inserting the batteries. Improper battery use may damage the product. Door / Window Sensor 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet locations. It contains small parts; keep away from children.  The sensor can be mounted either on the moving part or on the fixed part of a door or a window. Mounting can be accomplished either using the tape by peeling off the protection foil or using two screws with holes inside the battery compartment. If the tilt detection on a window (only normal windows, no roof windows) shall be used the sensor device must be placed on the moving part of the window and the magnet on the window frame.

Product Support

Manuals: ⇒  Aeotec Door / Window Sensor 7 product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Binary sensor
Power
1 CR123A battery is required. (included)
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
White
Weight
50g
Housing
ABS
Dimensions
4.8 x 2.8 x 1.3 inches
Compliance
Z-Wave Plus certified
Warranty 12 Months

Technical Specifications

Product Name 
 Temperature sensor
Temperature range -50°C - 125°C range
Temperature accuracy
0.5°C
Dimensions (W x H x D)
1 m
The DHS Garage Roller Limit Switch is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.

Technical Specifications

Product Name 
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20°C to 70°C
Service life Mechanically: 10,000,000 operations min.
Net Weight
100g
Housing
ABS, aluminium
Size 
10.5 x 2.8 x 3cm

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered. The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors. The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so. This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home. This product comes in multiple different colours. After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.

Documentation

FIBARO Z-Wave Door/Window Sensor 2 User Manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z‐Wave device type
Z-Wave binary sensor, multilevel command supported
Power
One battery, type ER 14250 1/2AA 3.6V (included)
Operation Range
Up to 30m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Temperature Measuring Accuracy
±0.5°C
Temperature Measuring Range
0 ~ 60°C
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 71mm x 18mm x 18mm
Compliance
AS/NZS 4268:2003+A1+A2
Regulatory Compliance Mark  Z1535
 
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information