The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
The?Brown3?D/W sensor is the device on the far right in this products thumbnail.
Pro-tool. Pro-tection.
Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.
What Dock enhances.Monitor 2 areas.
Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.
Monitor a whole area.
Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.
Water Sensor 6.
Flood sensor. Leak sensor. Safety sensor. Water Sensor 6. Your home?s 6th sense.
We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs.
Total Control.
Water Sensor 6 monitors your home.
Leaks & bursts.
Water Sensor 6 can detect minuscule amounts of water ? as little as 0.5mm / 0.02? of water. That makes it your first line of defence against damaged plumbing.
Floods.
Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements.
Overflows.
Accidents happen but that doesn?t make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you?ve forgotten to turn off before it?s too late.
Motion for security. Motion for presence. Motion for management. The?AETOEC MultiSensor 6?is perfect for more than just an intelligent security system. With a 5 metre range and a 120? field of view, the?AEOTEC MultiSensor 6?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data ? the?AEOTEC MultiSensor 6?makes your home automation system more powerful and more intelligent.
Shelly Uni is the smallest universal module that can make any old appliance smart! With this tiny, insulated chip, you can control any sensor and measure it, such as a liquid level sensor to measure the level of, or even automate the auto-filling system. No more waiting around in the morning for your coffee machine to heat its water and prepare your coffee! Just connect it to Shelly Uni and switch it on remotely as you please, or on a set schedule.
Shelly Humidity & Temperature Sensor H&S?Smart Home Automation WiFi Solution - Black
Shelly Humidity & Temperature Sensor?helps with monitoring changes in humidity and temperature while avoiding dryness and keeping comfortable conditions at your home.
Wireless: Connect Shelly Humidity & Temperature Sensor directly to your Wi-Fi network, without the need for any additional controller.
Humidity: Monitor excessive changes in humidity. Avoid dryness and conditions for mould growth.
Temperature control: Be aware of temperature fluctuations and keep your home comfortable at any time.
Easy to use: The only thing you need to manage your Shelly H&T is a mobile phone and the Shelly Cloud app.
Long-lasting battery: Feel more comfortable with Shelly H&T?s long-lasting battery life of up to 16 months.
With Shelly Humidity & Temperature Sensor you can see recorded data for humidity and temperature for up to a year.
USB power supply: An optional accessory that allows you to power the device with a cable instead of a battery
Monitor remotely: Monitor your home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices.
CONTROL ANY ELECTRIC HEATER
Turn the cheapest heaters into the smartest devices with?Shelly Humidity & Temperature Sensor and Shelly Plug - you can automatically control any electric heater.
365-DAY HISTORY
Shelly Humidity & Temperature Sensor records all the data for humidity and temperature.
Long-Lasting Battery Life
A perfect design combined with a battery lasting up to 16 months keeps your home always comfortable.
FOR DEVELOPERS
Shelly Humidity & Temperature Sensor (H&T) is open to the world and developers. Shellys are secured but at the same time give everyone the opportunity to use them easily in new and existing projects. With the embedded web server and the HTTP commands Shelly can be made compatible with your existing home automation system.
This product is approved for use in Australia but must be installed by a licensed electrician.
Content
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Power optimised.
Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6?s battery acts as an emergency backup.
Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don?t even have to use them. But if you do, Water Sensor 6?s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock.
Wireless optimised.
Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna.
Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges.
Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to.
In the box.
3M double side adhesive tape.
Desktop style of adapter without pins.
Dock for Water Sensor
6. Mounting screws.
Spot sensing rope x 2. USB cable for optional power supply.
The leak sensor with sensors.
Water Sensor 6 is a part of the AEOTEC Z-Wave intelligence range. It?s been designed to protect your home and it?s also been designed to make your smart home smarter. Three separate sensors are crafted into each Water Sensor 6.
Each of these sensors can be used to create intelligent home control scenarios via your Z-Wave gateway including the management of underfloor heating, HVAC control, and driveway heating.
Water sensor.
4 gold tipped water probes actively monitor for leaks and drips.
Vibration sensor.
Tamper and emergency events are confirmed by an algorithm that includes vibration detection.
Temperature sensor.
Crafted for heating management, an inbuilt temperature sensor can monitor temperatures between -20?C and 100?C.
Motion sensor.
Motion sensor. Motion for security. Motion for presence. Motion for management. The?AEOTEC MultiSensor 6?is perfect for more than just an intelligent security system. With a 5 metre range and a 120? field of view, the?AEOTEC MultiSensor 6?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data ? the?AEOTEC MultiSensor 6?makes your home automation system more powerful and more intelligent.
Temperature sensor.
From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The?AEOTEC MultiSensor 6?provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50?C (14 to 122?F) and reporting temperature changes back to a smart home gateway.
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC MultiSensor 6?s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC MultiSensor 6?is the smarts behind smart lighting.
Humidity sensor.
Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. The?AEOTEC MultiSensor 6 offers incremental monitoring of humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. The?AEOTEC MultiSensor 6?monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.
Vibration sensor.
It measures the environment it?s in, and it also measures itself. The AEOTEC MultiSensor 6?contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the?AEOTEC MultiSensor 6?? it?ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They?ll also be able to detect seismic activity within your home.
UV sensor.
Perfectly managing an environment means understanding it perfectly. The?AEOTEC MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured in line with the World Health Organisation?s UV Index, the?AEOTEC MultiSensor 6?measures a room?s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.
Product Support
The perfect sensor comes with the perfect accessories. The?AEOTEC MultiSensor 6?has four different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.?(sold separately)
Install the?AEOTEC MultiSensor 6?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC MultiSensor 6?up to 360? and refine its field of view by up to 50?.
USB cable.
After 2 years you won?t have to change batteries if you power your?AEOTEC MultiSensor 6?via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6 can be easily installed with just the provided double-sided tape from 3M.
Manuals:? Aeotec Multisensor 6 product manual
What Dock enhances.
Monitor 2 areas.
Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.
Monitor a whole area.
Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.
Total Control.
Water Sensor 6 monitors your home.
Leaks & bursts.
Water Sensor 6 can detect minuscule amounts of water ? as little as 0.5mm / 0.02? of water. That makes it your first line of defence against damaged plumbing.
Floods.
Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements.
Overflows.
Accidents happen but that doesn?t make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you?ve forgotten to turn off before it?s too late.
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC MultiSensor 6?s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC MultiSensor 6?is the smarts behind smart lighting.
Humidity sensor.
Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. The?AEOTEC MultiSensor 6 offers incremental monitoring of humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. The?AEOTEC MultiSensor 6?monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.
Vibration sensor.
It measures the environment it?s in, and it also measures itself. The AEOTEC MultiSensor 6?contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the?AEOTEC MultiSensor 6?? it?ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They?ll also be able to detect seismic activity within your home.
UV sensor.
Perfectly managing an environment means understanding it perfectly. The?AEOTEC MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured in line with the World Health Organisation?s UV Index, the?AEOTEC MultiSensor 6?measures a room?s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.
Recessor.?(sold separately)
Install the?AEOTEC MultiSensor 6?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC MultiSensor 6?up to 360? and refine its field of view by up to 50?.
USB cable.
After 2 years you won?t have to change batteries if you power your?AEOTEC MultiSensor 6?via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6 can be easily installed with just the provided double-sided tape from 3M.
Manuals:
