The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
Three different sensors built into the?AEOTEC TriSensor's?small finish.
A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters.
Shelly Humidity & Temperature Sensor H&S?Smart Home Automation WiFi Solution
Shelly Humidity & Temperature Sensor?helps with monitoring changes in humidity and temperature while avoiding dryness and keeping comfortable conditions at your home.
Wireless: Connect Shelly Humidity & Temperature Sensor directly to your Wi-Fi network, without the need for any additional controller.
Humidity: Monitor excessive changes in humidity. Avoid dryness and conditions for mould growth.
Temperature control: Be aware of temperature fluctuations and keep your home comfortable at any time.
Easy to use: The only thing you need to manage your Shelly H&T is a mobile phone and the Shelly Cloud app.
Long-lasting battery: Feel more comfortable with Shelly H&T?s long-lasting battery life of up to 16 months.
With Shelly Humidity & Temperature Sensor you can see recorded data for humidity and temperature for up to a year.
USB power supply: An optional accessory that allows you to power the device with a cable instead of a battery
Monitor remotely: Monitor your home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices.
CONTROL ANY ELECTRIC HEATER
Turn the cheapest heaters into the smartest devices with?Shelly Humidity & Temperature Sensor and Shelly Plug - you can automatically control any electric heater.
365-DAY HISTORY
Shelly Humidity & Temperature Sensor records all the data for humidity and temperature.
Long-Lasting Battery Life
A perfect design combined with a battery lasting up to 16 months keeps your home always comfortable.
FOR DEVELOPERS
Shelly Humidity & Temperature Sensor (H&T) is open to the world and developers. Shellys are secured but at the same time give everyone the opportunity to use them easily in new and existing projects. With the embedded web server and the HTTP commands Shelly can be made compatible with your existing home automation system.
This product is approved for use in Australia but must be installed by a licensed electrician.
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
The?Brown3?D/W sensor is the device on the far right in this products thumbnail.
Shelly?Door/Window 2 Sensors?Smart Home Automation WiFi Solution
Shelly Door/Window is designed to detect and report the opening and closing of doors and windows. Its compact design allows it to be easily installed on any door or window, and because of its lightweight, the sensor is nearly invisible.?With?Shelly?Door/Window Sensors you can make your home safer.
Wireless:?Shelly Door/Window sensor uses your home WiFi network, no additional controllers are required.
Stay safe: Shelly Door/Window is going to remind you about open windows when you?re about to leave for work, go to sleep, or when it may rain. You can also receive an instant notification if a door/window gets opened when you are not at home.
Highly compatible:?Compatible with Android, iOS, Amazon Alexa and Google Assistant,?and home automation servers using MQTT, CoAP, and REST API.
Door sensor: Shelly Door/Window detects and reports the opening and closing of doors and windows.
Temperature sensor: Be aware of temperature fluctuations and keep your home comfortable at any time.
Light sensor: The device has an integrated LUX sensor.
Wire-free: Simply place the sensor on your door or window frame and you are all set.
Monitor remotely: Monitor your home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices.
MORE THAN 2 YEARS OF BATTERY LIFE!
The very low power CPU combined with 2 x CR123A battery allows Shelly Door / Windows Sensors battery to last for more than 2 years thus making the device the open/close sensor with the longest battery life.
FOR DEVELOPERS
Shelly Door/Window 2 is open to the world and developers, it comes with a programming/debug header that can be used to flash alternative firmware on the device. It has an ESP8266 inside, with a 2MB flash chip. A USB-to-UART adapter is needed as well as a reliable 3.3V with at least 350 mA drive capability.
This product is approved for use in Australia but must be installed by a licensed electrician.?
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
The?Beige D/W sensor is the device in the middle in this products thumbnail.
Content
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Motion sensor
Motion sensor. Motion for security. Motion for presence. Motion for management. The?AEOTEC TriSensor?is perfect for more than just an intelligent security system. With a 7 metre range, the AEOTEC TriSensor?captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data.
The?AEOTEC TriSensor?makes your home automation system more powerful and more intelligent.
Temperature sensor.
From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The?AEOTEC TriSensor?provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 ?C and reporting those temperature changes back to a smart home gateway.
Light sensor.
Automated lighting is only as smart as the system that powers it. With the?AEOTEC TriSensor's digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC TriSensor?is the smarts behind smart lighting.
The perfect sensor comes with the perfect accessories. The?AEOTEC TriSensor?has three different accessories, each designed to make the installation of the sensor perfect for your home.
Place it anywhere.
Recessor.?(sold separately)
Install the?AEOTEC TriSensor?in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.
Discrete and for corner installations, the mounting arm allows you to rotate your?AEOTEC TriSensor to best ensure motion is detected when you want it to be.
Tape.
Weighing only 52 grams, the?AEOTEC TriSensor can be easily installed with just the provided double-sided tape from 3M.
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capabilities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Three different sensors built into the?AEOTEC TriSensor's?small finish.
A motion sensor to monitor presence in your rooms, a temperature sensor to manage its environment, and a light sensor to manage connected lighting and shutters.
Recessor.?(
