Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the?AEOTEC MultiSensor 6?and?AEOTEC TriSensor?allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.
Whichever power method you?re using with your multi-sensor, you can keep on using it with the?AEOTEC Recessor.
The?AEOTEC Recessor?has been designed to allow for each sensor?s batteries to still easily be changed, or for the?AEOTEC MultiSensor 6?s optional power cable to be used if you prefer to power your sensor without batteries.
Still precise.
The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them.
Product Support
The? perfect accessories. The?AEOTEC MultiSensor 6?ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.
Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.?(sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?.
USB cable.?(sold separately)
After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M.
Smart sensors.
Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the?AEOTEC MultiSensor 6?and?AEOTEC TriSensor?allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.
?
The Smart Motion Works with SmartThings sensor enables you to receive alerts of motion activity in your spaces. Additionally youll be able to set connected devices to turn on and off as people come and go. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
Aeotec Z-Wave Heavy Duty Smart Switch can switch powered electrical devices and appliances that draw up to 40 amps or 9600 Watts of power. Includes built-in Z-Wave signal repeater and extended Z-Wave wireless range (up to 150m outdoors). Rated IP44 for both outdoor and indoor use.
Electronics that use up to 40 amps of power. They?re the big electronics and appliances in your home. Big fridges and pool pumps. Hot water systems and electric car chargers.
If it?s big, if it uses a lot of power, Heavy Duty Smart Switch was made for it.
Requires professional installation.
The Aeotec Heavy Duty Smart Switch must be installed by a licensed electrician.
The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controllers outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you?ll be amazed at just how much functionality we were able to craft inside.
Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don?t. But perfect lighting has never been easy.
Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you?ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you?re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache.
No more. Nano Dimmer offers smart, connected lighting without any of the hassles.
Control any switch. From anywhere.?Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you?re not standing right next to them or can?t reach them, they?re limited.
No more. The future is smarter. So is your home. The?AEOTEC Dual Nano Switch InWall?offers complete wireless control of your switches and sockets.
The?AEOTEC Nano Switch?offers total control, easily. Impossibly small, each?AEOTEC Dual Nano Switch?installs invisibly behind any of your home?s existing switches or power sockets. Simply unscrew the faceplate, install the?AEOTEC Nano Switch?behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
The Active Infrared Sensor is part of the sensors family that creates an invisible infrared beam between the two units which can be placed up to 20 metres apart. The trigger activates when someone or something moves through and breaks the beam. This sensor can be connected with any binary Z-Wave sensor to be a part of the Z-Wave ecosystem.
Ideal for nursing care of the elderly, monitoring of children's movements, monitoring doorways, windows, detering and warning of unwanted intruders etc.
Please note:?Power supply 12V is required.
Content
Product Description
Still perfectly powered.
Whichever power method you?re using with your multi-sensor, you can keep on using it with the?AEOTEC Recessor.
The?AEOTEC Recessor?has been designed to allow for each sensor?s batteries to still easily be changed, or for the?AEOTEC MultiSensor 6?s optional power cable to be used if you prefer to power your sensor without batteries.
Still precise.
The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them.
Product Support
The? perfect accessories. The?AEOTEC MultiSensor 6?ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.
Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.?(sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?.
USB cable.?(sold separately)
After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M.
Manuals:? Aeotec Multisensor 6 product manual
Technical Specification
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 86mm x 86mm x 43mm
Warranty
12 Months
The Smart Motion Works with SmartThings sensor enables you to receive alerts of motion activity in your spaces. Additionally youll be able to set connected devices to turn on and off as people come and go. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
Product Description
Important safety information.Warning:?Be careful of electric shock. Only installation and maintenance personnel should operate this button.
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
A licensed electrician with knowledge and understanding of electrical systems and safety should complete the installation.
Keep product away from open flames and extreme heat. Avoid direct sunlight or heat exposure.
Heavy Duty Smart Switch Gen5 current?can not exceed 40 amps.
Contains small parts; keep away from children.
Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them.
All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.
PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS:
Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using Zellweger equipment?or similar onto their distribution networks in order to remotely control devices such as off-peak hot water systems and street lighting, although other areas within Australia also use this technology. Not all properties are affected by ripple control, so just because you might live in one of these areas, does not mean that you will have these problems.
Ripple injection control systems work by superimposing coded control signals, commonly 750Hz or 1050Hz on the 50 Hz mains supply.
Some electrical appliances such as fans, dimmers, toasters and LED lighting can be sensitive to this ripple control signal. The results could be audible buzzing noises from fans or flickering lights whenever the ripple control signals are present.
Electricity suppliers are advising users to install appropriate?ripple signal filters in such areas.
The ripple signal filter is a tuned passive inline filter that completely eliminates the superimposed ripple injection control signal from the normal mains supply to produce a noise-free filtered mains supply which can then be connected to the electrical appliances or light control systems. The ripple signal filter is specifically tuned to eliminate the ripple control signal frequency of 750Hz or 1050Hz.
However, we can?t guarantee the ripple signal filter always will help you if you experiencing such issues. Please contact your local energy provider to get more information and proposed solutions for your electrical installation.
If you are getting similar problems with your dimmers and fans and it?s not Ripple Control Signal and you are hearing the tones at random times of the day, your electrical supply may be affected by harmonics; a power fluctuation that is not part of the normal electricity supply or ripple control signal output.
Harmonics are caused by interference created by other equipment on the network, such as inverter type air conditioners and switch-mode power supplies for computers.
The offending appliances may be in your home or other premises on the local power grid. If you are being affected by network harmonics, it may be of benefit to transfer the electricity supply to your premises to a different phase in the street. This is something you will need to discuss with your electrical company.
We are strongly recommending for the areas we have mentioned above to run tests with only a few dimmers before committing for high volumes. If results are not fully OK you may use relays only instead of dimmers.Please note that our warranty for the faulty devices is not covering above-mentioned conditions with your local electric grids.
Please see affected with Ripple Signalling areas here:
QUEENSLAND
Only Southern Queensland (Energex) has Ripple Signalling.
The Frequency is 1050Hz.
The rest of Queensland (Ergon) does not have Ripple Signalling.
Once installed behind a switch or socket, the?AEOTEC Dual Nano Switch offers unparalleled wireless control via Z-Wave protocol. It lets you control, automate, and monitor your lights and power sockets. From anywhere. Anytime. And it does it all through enhancement ? with the AEOTEC Nano Switch, your sockets and switches don?t have to be replaced and they?ll continue to offer the same manual control that you?re used to.
?
Electronics that use up to 40 amps of power. They?re the big electronics and appliances in your home. Big fridges and pool pumps. Hot water systems and electric car chargers.
If it?s big, if it uses a lot of power, Heavy Duty Smart Switch was made for it.
The?AEOTEC Nano Switch?offers total control, easily. Impossibly small, each?AEOTEC Dual Nano Switch?installs invisibly behind any of your home?s existing switches or power sockets. Simply unscrew the faceplate, install the?AEOTEC Nano Switch?behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.
PLEASE NOTE FOR THE INSTALLATIONS IN THE AREAS WHERE ELECTRICITY SUPPLIERS USE OFF-PEAK RIPPLE CONTROL SIGNALS:
Electricity suppliers in particular areas of Australia such as NSW, QLD and some other places are injecting an off-peak ripple control signal using 
NSW
Manuals:
