WI-FI MOTION SENSOR WITH TEMPERATURE DETECTION

 

$74.99

Availability: In Stock

SHELLY MOTION 2
WI-FI MOTION SENSOR WITH TEMPERATURE DETECTION AND OVER 1 YEAR OF BATTERY LIFE

Shelly Motion 2 the Device is a high-sensitivity ultra-low power consumption Wi-Fi motion sensor which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years and in active transmission approx. 6 hours/day motion detection estimated between 12 and 18 months without recharging.

Features

  • Tiny dimensions and improved design
  • Flexible holder and wall sticker included 
  • Enhanced with temperature and LUX sensor f
  • Webhooks – 13 with 5 URLs per hook
  • Highly compatible

Shelly Catalogue https//www.shelly.cloud/documents/catalogues/catalogue.pdf

112 in stock

SKU: SH-SHELLYMOTION2 Categories: , Tags: ,

Quick Comparison

SettingsWI-FI MOTION SENSOR WITH TEMPERATURE DETECTION removeDHS Active Infrared Sensor removeAEOTEC Flood Sensor 6 removeAEOTEC MultiSensor Recessor removeDHS Garage Press Limit Switch removeDHS Garage Roller Limit Switch remove
Image
SKUSH-SHELLYMOTION2DHS-SNS-AIR-DHSDHS-SNS-FL-AEODHS-SNS-MS-AEO-RECDHS-SNS-LS-DHS-02DHS-SNS-LS-DHS-01
Rating
Price$74.99$39.99$89.99$24.99$19.99$19.99
Stock

112 in stock

Out of stock

Out of stock

4 in stock

12 in stock

2 in stock

Availability112 in stockOut of stockOut of stock4 in stock12 in stock2 in stock
Add to cart

Add to basket

Read more

Read more

Add to basket

Add to basket

Add to basket

DescriptionSHELLY MOTION 2
WI-FI MOTION SENSOR WITH TEMPERATURE DETECTION AND OVER 1 YEAR OF BATTERY LIFE

Shelly Motion 2 the Device is a high-sensitivity ultra-low power consumption Wi-Fi motion sensor which also features light and temperature metering. The built-in light and temperature sensors provide additional opportunities for home or office automation. Shelly Motion 2 also has an integrated accelerometer for tamper protection and features vibration detection. The built-in 6500 mAh rechargeable Li-ion battery allows the Device to stay connected to the Internet in standby mode for up to 3 years and in active transmission approx. 6 hours/day motion detection estimated between 12 and 18 months without recharging.

Features
  • Tiny dimensions and improved design
  • Flexible holder and wall sticker included 
  • Enhanced with temperature and LUX sensor f
  • Webhooks - 13 with 5 URLs per hook
  • Highly compatible
Shelly Catalogue https//www.shelly.cloud/documents/catalogues/catalogue.pdf
The Active Infrared Sensor is part of the sensors family that creates an invisible infrared beam between the two units which can be placed up to 20 metres apart. The trigger activates when someone or something moves through and breaks the beam. This sensor can be connected with any binary Z-Wave sensor to be a part of the Z-Wave ecosystem. Ideal for nursing care of the elderly, monitoring of children's movements, monitoring doorways, windows, detering and warning of unwanted intruders etc. Please note:?Power supply 12V is required.Water Sensor 6. Flood sensor. Leak sensor. Safety sensor. Water Sensor 6. Your home?s 6th sense. We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs. aeotec z wave water sensor 6 Total Control. Water Sensor 6 monitors your home. Wave flood and water sensor Leaks & bursts. Water Sensor 6 can detect minuscule amounts of water ? as little as 0.5mm / 0.02? of water. That makes it your first line of defence against damaged plumbing. Floods. Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements. Overflows. Accidents happen but that doesn?t make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you?ve forgotten to turn off before it?s too late.Smart sensors. Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the?AEOTEC MultiSensor 6?and?AEOTEC TriSensor?allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle. ZW100a?DSE010aDSE010cThe?DHS Garage Press Limit Switch can be connected with any binary Z-Wave sensors such as the?FIBARO Z-Wave Door/Window Sensor?to report the status of your garage door to your Z-Wave gateway. Note:?A Z-Wave sensor is not included with this device.The?DHS Garage Roller Limit Switch can be connected with any binary Z-Wave sensors such as the?FIBARO Z-Wave Door/Window Sensor?to report the status of your garage door to your Z-Wave gateway. Roller Limit SwitchRoller Limit Switch ActionRoller Limit Switch 2 Note:?A Z-Wave sensor is not included with this device.
Content

Technical Specifications

Product Name?
Active Infrared Sensor
Type
Single Beam
Operation Range
20m
Power
DC/AC 12 to 24V (not in the set)
Wave Length
940nm
Infra-red Frequency
1.92Khz
Operation temperature
-20?C to 70?C
Input RX 15mA~TX 30mA
Net?Weight
93g
Housing
ABS
Size (Each One)
7.5 x 4.8 x 3cm

Product Description

The leak sensor with sensors. Water Sensor 6 is a part of the AEOTEC Z-Wave intelligence range. It?s been designed to protect your home and it?s also been designed to make your smart home smarter. Three separate sensors are crafted into each Water Sensor 6. Each of these sensors can be used to create intelligent home control scenarios via your Z-Wave gateway including the management of underfloor heating, HVAC control, and driveway heating. Water sensor. 4 gold tipped water probes actively monitor for leaks and drips. Vibration sensor. Tamper and emergency events are confirmed by an algorithm that includes vibration detection. Temperature sensor. Crafted for heating management, an inbuilt temperature sensor can monitor temperatures between -20?C and 100?C.

Product Support

Manuals: ? Aeotec Water Sensor 6 product manual Works with VeraAeotec LED Bulb with Vera copy

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ ?approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
1 CR123A battery is required. (included)
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
?10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
107mm x 61mm x 33mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Still perfectly powered. Whichever power method you?re using with your multi-sensor, you can keep on using it with the?AEOTEC Recessor. The?AEOTEC Recessor?has been designed to allow for each sensor?s batteries to still easily be changed, or for the?AEOTEC MultiSensor 6?s optional power cable to be used if you prefer to power your sensor without batteries. aeotec multisensor 6 recessor a Still precise. The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor. Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them. aeotec multisensor 6 recessor

Product Support

The? perfect accessories. The?AEOTEC MultiSensor 6?ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home. ZW100d Recessor. Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm.?(sold separately) Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?. USB cable.?(sold separately) After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable. Tape. Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M. Manuals: ? Aeotec Multisensor 6 product manual

Technical Specification

Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 86mm x 86mm x 43mm
Warranty 12 Months
The?DHS Garage Press Limit Switch?is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.

Technical Specifications

Product Name?
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20?C to 70?C
Service life Mechanically: 10,000,000 operations min.
Net?Weight
100g
Housing
ABS, aluminium
Size?
10.5 x 2.8 x 3cm
The?DHS Garage Roller Limit Switch?is an industrial quality mechanical switch activated by the motion of garage doors, gates, windows etc.

Technical Specifications

Product Name?
Limit switch
Type
Mechanical switch
Humidity
95% RH max
Power
Not required
Operating frequency
120 operations/min
Operation temperature
-20?C to 70?C
Service life Mechanically: 10,000,000 operations min.
Net?Weight
100g
Housing
ABS, aluminium
Size?
10.5 x 2.8 x 3cm
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information