The Aeotec Smart Button Works with SmartThings enables convenient control of connected devices like lights electronics and appliances – simply setup which smart devices you would like your Smart Button to control using the SmartThings app.
The Aeotec Smart Button Works with SmartThings enables convenient control of connected devices like lights electronics and appliances – simply setup which smart devices you would like your Smart Button to control using the SmartThings app.
The Aeotec Smart Button Works with SmartThings enables convenient control of connected devices like lights electronics and appliances - simply setup which smart devices you would like your Smart Button to control using the SmartThings app.
Aeotec Z-Wave Heavy Duty Smart Switch can switch powered electrical devices and appliances that draw up to 40 amps or 9600 Watts of power. Includes built-in Z-Wave signal repeater and extended Z-Wave wireless range (up to 150m outdoors). Rated IP44 for both outdoor and indoor use.
Electronics that use up to 40 amps of power. They?re the big electronics and appliances in your home. Big fridges and pool pumps. Hot water systems and electric car chargers.
If it?s big, if it uses a lot of power, Heavy Duty Smart Switch was made for it.
Requires professional installation.
The Aeotec Heavy Duty Smart Switch must be installed by a licensed electrician.
Smart sensors.
Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the?AEOTEC MultiSensor 6?and?AEOTEC TriSensor?allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.
?
Pro-tool. Pro-tection.
Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.
What Dock enhances.Monitor 2 areas.
Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6.?Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1? thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.
Monitor a whole area.
Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.?While you can be sure that leaks will happen, you can?t always be sure where they will happen. That?s particularly true when it comes water tanks and boilers. While they will leak, it?s impossible to know from where they?ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.
The Smart Motion Works with SmartThings sensor enables you to receive alerts of motion activity in your spaces. Additionally youll be able to set connected devices to turn on and off as people come and go. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
The Aeotec Smart Plug?Works with SmartThings allows you to plug in and control an electrical device in your home from anywhere. This three-prong smart outlet enables you to power on and off devices such as lights electronics and appliances. The SmartThings app for iOS and Android enables monitoring automated and manual control of your plugged-in device from anywhere.
Content
The Aeotec Smart Button Works with SmartThings enables convenient control of connected devices like lights electronics and appliances - simply setup which smart devices you would like your Smart Button to control using the SmartThings app.
Product Description
Important safety information.Warning:?Be careful of electric shock. Only installation and maintenance personnel should operate this button.
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
A licensed electrician with knowledge and understanding of electrical systems and safety should complete the installation.
Keep product away from open flames and extreme heat. Avoid direct sunlight or heat exposure.
Heavy Duty Smart Switch Gen5 current?can not exceed 40 amps.
Contains small parts; keep away from children.
Still perfectly powered.
Whichever power method you?re using with your multi-sensor, you can keep on using it with the?AEOTEC Recessor.
The?AEOTEC Recessor?has been designed to allow for each sensor?s batteries to still easily be changed, or for the?AEOTEC MultiSensor 6?s optional power cable to be used if you prefer to power your sensor without batteries.
Still precise.
The?AEOTEC Recessor?doesn?t just convert the?AEOTEC MultiSensor 6?into a Z-Wave ceiling or beam sensor, it converts it into a precise sensor.
Once recessed, your?AEOTEC MultiSensor 6?can be angled up to 30? within the?Recessor, fine tuning its measurements and readings to be just where you need them.
Product Support
The? perfect accessories. The?AEOTEC MultiSensor 6?ships with 4 different accessories, each designed to make the installation of the sensor perfect for your home.
Recessor.
Install the?AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.
Mounting arm.?(sold separately)
Discrete and for corner installations, the mounting arm allows you to rotate MultiSensor 6 up to 360? and refine its field of view by up to 50?.
USB cable.?(sold separately)
After 2 years you won?t have to change batteries if you power MultiSensor 6 via mains power using the provided 1.5 metre USB cable.
Tape.
Weighing only 74 grams, the?AEOTEC MultiSensor 6?can be easily installed with just the provided double sided tape from 3M.
Manuals:? Aeotec Multisensor 6 product manual
Technical Specification
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Storage temperature
-10 ~ 80 ?C
Colour
White
Weight
70g
Housing
ABS
Dimensions
(LxWxH) 86mm x 86mm x 43mm
Warranty
12 Months
Product Description
Power optimised.
Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6?s battery acts as an emergency backup.
Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don?t even have to use them. But if you do, Water Sensor 6?s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock.
Wireless optimised.
Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna.
Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It?s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges.
Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to.
In the box.
3M double side adhesive tape.
Desktop style of adapter without pins.
Dock for Water Sensor
6. Mounting screws.
Spot sensing rope x 2. USB cable for optional power supply.
The Smart Motion Works with SmartThings sensor enables you to receive alerts of motion activity in your spaces. Additionally youll be able to set connected devices to turn on and off as people come and go. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.
The Aeotec Smart Plug?Works with SmartThings allows you to plug in and control an electrical device in your home from anywhere. This three-prong smart outlet enables you to power on and off devices such as lights electronics and appliances. The SmartThings app for iOS and Android enables monitoring automated and manual control of your plugged-in device from anywhere.