Aeotec SmartThings Motion

 

$54.99

Availability: In Stock

The Aeotec Multipurpose Works with SmartThings sensor enables you to receive alerts when a door or window is opened or closed and monitor the temperature in a room. In addition youll be able to set connected smart devices such as lights to power on and off as you open doors windows or cabinets – or when the temperature reaches a set level. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.

1 in stock

SKU: AE-GP-AEOMPSEU Category: Tags: , , ,

Description

The Aeotec Multipurpose Works with SmartThings sensor enables you to receive alerts when a door or window is opened or closed and monitor the temperature in a room. In addition youll be able to set connected smart devices such as lights to power on and off as you open doors windows or cabinets – or when the temperature reaches a set level. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.

Quick Comparison

SettingsAeotec SmartThings Motion removeAEOTEC Nano WallSwipe removeAEOTEC D/W Sensor 7 removeAEOTEC Multisensor 6 removeAEOTEC Flood Sensor Dock removeAEOTEC Nano Sgl Switch InWall remove
Image
SKUAE-GP-AEOMPSEUDHS-LIT-SWIPE-AEODHS-SNS-DW-AEO-07DHS-SNS-MS-AEODHS-SNS-FL-AEO-RECDHS-LIT-SWW-AEO-01
Rating
Price$54.99$88.99$74.99$79.99$34.99$86.99
Stock

1 in stock

11 in stock

1 in stock

12 in stock

2 in stock

4 in stock

Availability1 in stock11 in stock1 in stock12 in stock2 in stock4 in stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionThe Aeotec Multipurpose Works with SmartThings sensor enables you to receive alerts when a door or window is opened or closed and monitor the temperature in a room. In addition youll be able to set connected smart devices such as lights to power on and off as you open doors windows or cabinets - or when the temperature reaches a set level. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.WallSwipe integrates with Aeotec's Nano Dimmer, Nano Switch or Nano Shutter in-wall controllers to offer intelligent and convenient capacitive wall switch and motion switch control. WallSwipe includes a screw-less switch plate compatible with Australian wall switch installations. Aeotec Nano WallSwipeAeotec Nano WallSwipe2 The technical specifications of Aeotec WallSwipe can be viewed at that link. Package contents:
  1. 2x Screws
  2. 1.5mm JST connection cable

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

It contains small parts; keep away from children.
The Aeotec Door/Window Sensor 7 is a Z-Wave Plus device for detecting if a door or window is opened or closed. Small, battery powered (included) and easily attached to virtually anything that opens or closes around your home. Door Window Sensor 7 also includes universal "dry contact" terminals allowing you to wire in other external sensors. Z-Wave Plus certified, the AEOTEC Door/Window Sensor 7 is compatible with all certified Z-Wave gateways including Control4 (Z-Wave enabled), HomeSeer, Indigo for Mac, and Vera/Ezlo Edge/VeraPlus/VeraSecure/Athom Controllers. aeotec z wave dw sensor 7 binary aeotec z wave dw sensor 7 icon sensitivity It’s Aeotec's fastest sensor yet with 50% faster communication than other models. Its sensor’s enhanced sensitivity and use of Z-Wave S2 and Aeotec’s exclusive Spatial Intrusion Algorithm means that the Z-Wave wireless signals your smart home depends on are transmitted, received and processed instantly. aeotec z wave dw sensor 7 icon secure fast Maximised wireless range. To be simple to install, it has to be wireless. To secure your home, its engineering has to be perfect. Door / Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to communicate wirelessly 50% faster and up to 67% further in real-world use. aeotec z wave dw sensor 7 icon battery Optimised battery life. Wireless is convenient but having to change batteries too often is annoying. That’s why Door / Window Sensor 7 features a unique balance of hardware and software optimisations which allow it to use up to 66% less battery power to communicate via Z-Wave Plus. It’s German engineering at its very best. aeotec z wave dw sensor 7 icon spatial Intelligent multi-sensor. It's not just a security or an intelligence sensor - it's a 3-in-1 multipurpose sensor. Door / Window Sensor 7 features a unique layering of a contact sensor (reed switch), gyroscope and universal binary input sensor. aeotec z wave dw sensor 7 icon s2 Secure security. It drives your home’s security - so it needs to be secure. Door / Window Sensor 7 combines ECDH key exchange and AES-128 bit communication encryption to render man-in-the-middle and brute force hacking virtually impossible.Motion for security. Motion for presence. Motion for management. The AETOEC MultiSensor 6 is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, the AEOTEC MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – the AEOTEC MultiSensor 6 makes your home automation system more powerful and more intelligent. ZW100aZW100a1Pro-tool. Pro-tection. Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available. ZW160a What Dock enhances. Monitor 2 areas. Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6. Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1” thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas. ZW160d Monitor a whole area. Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler. While you can be sure that leaks will happen, you can’t always be sure where they will happen. That’s particularly true when it comes water tanks and boilers. While they will leak, it’s impossible to know from where they’ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it. ZW160cControl any switch. From anywhere. Wirelessly. Power sockets and light switches: amazing inventions. They literally changed the world. But if you’re not standing right next to them or can’t reach them, they’re limited. No more. The future is smarter. So is your home. The AEOTEC Nano Switch InWall offers completely wireless control of your switches and sockets. ZW116a The AEOTEC Nano Switch offers total control, easily. Impossibly small, each AEOTEC Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install the AEOTEC Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
ContentThe Aeotec Multipurpose Works with SmartThings sensor enables you to receive alerts when a door or window is opened or closed and monitor the temperature in a room. In addition youll be able to set connected smart devices such as lights to power on and off as you open doors windows or cabinets - or when the temperature reaches a set level. The SmartThings app for iOS and Android also enables monitoring and control of your connected devices.

Product Support

Manuals: ⇒  WallSwipe for Nano user guide

Technical Specifications

RF Protocol
None
RF Frequency
None
Device type
Sensor
Power
Low voltage
Operation Range
Near Z-Wave module
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
-10 ~ 50 °C
Colour
White
Weight
50g
Housing
ABS
Dimensions
105 x 42 x 34mm
Warranty 12 Months

Product Description

The technical specifications of Door / Window Sensor 7 can be viewed at that link. Package contents:
  1. Sensor Unit.
  2. Cover
  3. Big Magnet.
  4. Small Magnet.
  5. Double-Sided Tape large (×2).
  6. Double-Sided Tape small (x2).
  7. Screws (×4).
  8. Dowels( x4).

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.

Keep product and batteries away from open flames and extreme heat. Avoid direct sunlight or heat exposure. Always remove all batteries from products that are being stored and not used. Batteries may damage the appliance if they leak. Do not use rechargeable batteries. Ensure correct polarity when inserting the batteries. Improper battery use may damage the product. Door / Window Sensor 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet locations. It contains small parts; keep away from children.  The sensor can be mounted either on the moving part or on the fixed part of a door or a window. Mounting can be accomplished either using the tape by peeling off the protection foil or using two screws with holes inside the battery compartment. If the tilt detection on a window (only normal windows, no roof windows) shall be used the sensor device must be placed on the moving part of the window and the magnet on the window frame.

Product Support

Manuals: ⇒  Aeotec Door / Window Sensor 7 product manual

Technical Specification

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Binary sensor
Power
1 CR123A battery is required. (included)
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
White
Weight
50g
Housing
ABS
Dimensions
4.8 x 2.8 x 1.3 inches
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Motion sensor. Motion sensor. Motion for security. Motion for presence. Motion for management. The AEOTEC MultiSensor 6 is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, the AEOTEC MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – the AEOTEC MultiSensor 6 makes your home automation system more powerful and more intelligent. Temperature sensor. From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The AEOTEC MultiSensor 6 provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes back to a smart home gateway. ZW100d1 Light sensor. Automated lighting is only as smart as the system that powers it. With the AEOTEC MultiSensor 6’s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambience. From opening and closing curtains to setting lights to be the perfect level be it day or night, the AEOTEC MultiSensor 6 is the smarts behind smart lighting. ZW100d2 Humidity sensor. Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. The AEOTEC MultiSensor 6 offers incremental monitoring of humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. The AEOTEC MultiSensor 6 monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect. ZW100d3 Vibration sensor. It measures the environment it’s in, and it also measures itself. The AEOTEC MultiSensor 6 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect the AEOTEC MultiSensor 6 – it’ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They’ll also be able to detect seismic activity within your home. ZW100d4 UV sensor. Perfectly managing an environment means understanding it perfectly. The AEOTEC MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured in line with the World Health Organisation’s UV Index, the AEOTEC MultiSensor 6 measures a room’s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.   ZW100d5

Product Support

The perfect sensor comes with the perfect accessories. The AEOTEC MultiSensor 6 has four different accessories, each designed to make the installation of the sensor perfect for your home. ZW100d Recessor. (sold separately) Install the AEOTEC MultiSensor 6 in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor. Mounting arm. Discrete and for corner installations, the mounting arm allows you to rotate your AEOTEC MultiSensor 6 up to 360° and refine its field of view by up to 50°. USB cable. After 2 years you won’t have to change batteries if you power your AEOTEC MultiSensor 6 via mains power using the provided 1.5 metre USB cable. Tape. Weighing only 74 grams, the AEOTEC MultiSensor 6 can be easily installed with just the provided double-sided tape from 3M. Manuals: ⇒ Aeotec Multisensor 6 product manual Works with VeraAeotec LED Bulb with Vera copy

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Z-Wave multilevel sensor
Power
USB DC 4.75V to 5.25V
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
White
Weight
74g
Housing
ABS
Dimensions
(LxWxH) 28mm x 28mm x 42mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Power optimised. Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6’s battery acts as an emergency backup. Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don’t even have to use them. But if you do, Water Sensor 6’s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock. Wireless optimised. Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal, however, its wireless range can be impacted by metal objects such as washing machines and fridges. Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to. In the box. 3M double side adhesive tape. Desktop style of adapter without pins. Dock for Water Sensor 6. Mounting screws. Spot sensing rope x 2. USB cable for optional power supply.

Product Support

Manuals: ⇒ Aeotec Dock for Water Sensor 6 product manual Aeotec LED Bulb with Vera copy

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Device Dock
Power
USB, batteries
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
White
Weight
70g
Housing
ABS
Dimensions
120mm x 61mm x 33mm
Compliance
Z-Wave Plus certified
Warranty 12 Months

Product Description

Once installed behind a switch or socket, the AEOTEC Nano Switch offers unparalleled wireless control via Z-Wave protocol. It lets you control, automate, and monitor your lights light and power sockets. From anywhere. Anytime. And it does it all through enhancement – with the AEOTEC Nano Switch, your sockets and switches don’t have to be replaced and they’ll continue to offer the same manual control that you’re used to. ZW098 B22dd

Product Support

Since the AEOTEC Nano Switch also supports the 24VDC power input,  you can also use it to control loads powered by 24VDC (see user manual) Works with VeraAeotec LED Bulb with Vera Manuals: ⇒  Aeotec Nano Switch product manual

Technical Specifications

RF Protocol
Z-Wave Plus (500 series chip)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Z-Wave device type
Switch
Power
240V AC
Operation Range
Up to 40m without obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 80 °C
Colour
white
Weight
50g
Housing
ABS
Size
42mm x 40mm x 25mm
Compliance
Z-Wave Plus certified
Warranty 12 Months
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information