No products in the basket.
Swann Spare Parts
Showing all 6 results
-
Smart Security, Swann CCTV Security Australia, Swann Spare Parts
Swann NVR Replacement PSU 48V 1.8A NVR8-7300 7400 AU Approved
Smart Security, Swann CCTV Security Australia, Swann Spare PartsSwann NVR Replacement PSU 48V 1.8A NVR8-7300 7400 AU Approved
- Australian Approved Supply
- Fully Regulated 100V-240V can be used worldwide
- 48V DC 2A Switching Power Supply (upgrade from the original 1.87A)
- Good for most of CCTV Cameras
- Inner diameter: 2.1mm, outer diameter: 5.5mm
- Suits Swann NVR-7300 & NVR-7400 Series Recorders
- Includes 240V IEC Cable from PSU to Wall Socket
- Don’t risk a non approved Power Supply running 24/7
SKU: SR-PSU-48V-1.8A-CP -
Smart Security, Swann CCTV Security Australia, Swann Spare Parts
Swann 18Mtr Original BNC Cable to suit DVR Cameras Supports up to 4K
Smart Security, Swann CCTV Security Australia, Swann Spare PartsSwann 18Mtr Original BNC Cable to suit DVR Cameras Supports up to 4K
- Original Cable Supplied with DVK / DVR Kits by Swann
- Supports any BNC CCTV Cameras including older models from Swann or other brands
- Will support 1000 / 2000 / 3000 / 4000 / 5000 Swann Series CCTV Systems
- If your Swann camera has a push and turn connector(BNC) then this will suit your camera.
SKU: SR-CAB-18DVR4K -
Smart Security, Swann CCTV Security Australia, Swann Spare Parts
Toshiba Hard Disk Drive to suit all DVR & NVR models – 2TB HDD
Smart Security, Swann CCTV Security Australia, Swann Spare PartsToshiba Hard Disk Drive to suit all DVR & NVR models – 2TB HDD
- Original Swann Hard Disk Drive designed for Swann Recorders
- Replacement Hard Disk Drive for Swann NVR / DVR
- 2TB Toshiba 3.5″ Surveillance Drive
- Suits Swann NVR8’s, NVR16’s AND All Swann DVR Models
SKU: HD2TB-TOSH -
Smart Security, Swann CCTV Security Australia, Swann Spare Parts
Long Range Antennas to suit Swann 8580 Series NVR Cameras – Preconfigured 5.8Ghz
Smart Security, Swann CCTV Security Australia, Swann Spare PartsLong Range Antennas to suit Swann 8580 Series NVR Cameras – Preconfigured 5.8Ghz
Allows you to position a Swann NHD Camera in a shed or at a long distance from the NVR Recorder using line of sight wireless signal. Replaces the Cable with a Wireless Point to Point set of antennas.
- Suits Swann 8580 Series NVR both 8 & 16 Channel Recorders
- Extend Swann Cameras SWNHD to areas that cannot be run via cable using a wireless bridge.
- Supports 1 Camera or many(see below)
- Strong signal with dual antenna design & signal recovery technology.
- Up to 5km point-to-point range (no obstructions) – this rating is theoretical and works best in shorter distances to 200mtrs
- 60°(H) / 30°(V) signal angle
- Pole, wall and rack mountable
- Operates in extreme temperatures from -40°C to 55°C
- IP65 weather resistance for outdoor use.
SKU: SR-ExANT-SW8580
