No products in the basket.
Switches and Relays
Switches and Relays
Showing all 10 results
-
Smart Lighting, Switches and Relays
Shelly Plus 1PM
WiFi-operated relay switch, 1 channel 16A, with Power Metering
Control and measure power consumption for a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated relay switch, with Bluetooth connection
- Wi-Fi operated – Connects to your Wi-Fi network. No HUB required!
- Bluetooth – Add devices quick and easy via Bluetooth connection, using Shelly Cloud App
- Power metering with data storage
- A wide range of voltages supported
- Extremely fast processor ? ESP32
- Enhanced safety ? Overpower, overvoltage and over-temperature protection
- Enhanced security – MQTT and WSS support, TLS and custom certificates support
- Improved API interface
- Onboard scripting features to allow you to automate to your heart’s content without any hub required.
SKU: SH-SHELLY1PM+ -
Smart Lighting, Switches and Relays
Shelly Plus 1
WiFi-operated relay switch, 1 channel 16A
Control a wide range of home appliances and office equipment (lights, power lines, security systems, heating radiators, air conditioners, etc.) from anywhere in the world with the smallest WiFi-operated relay switch, with Bluetooth connection!
- Wi-Fi operated – Connects to your Wi-Fi network. No HUB required!
- Bluetooth – Add devices quick and easy via Bluetooth connection, using the Shelly Cloud App
- Dry contacts
- Low voltage support
- Extremely fast processor ? ESP32
- Enhanced safety – Over-temperature protection
- Enhanced security – MQTT and WSS support, TLS and custom certificates support
- Improved API interface
- Onboard scripting features to allow you to automate to your heart’s content without any hub required.
SKU: SH-SHELLY1+ -
Smart Lighting, Switches and Relays
Qubino Z-Wave 2 Relays
The?QUBINO Double Switch (by GOAP) is a Z-Wave module for switching on/off one or two electrical devices (e.g. light, fan, etc …). The module can be controlled either through the Z-wave network or through the wall switch manually.
This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.
Supported switches
The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.
SKU: DHS-LIT-SWW-QUB-02 -
Smart Lighting, Switches and Relays
Shelly RGBW 2
The Shelly RGBW 2 is a Wi-Fi-operated RGBW controller designed to make your LED strips smart in one easy step. This versatile device allows you to control all your lighting directly from a mobile device or tablet. Key features include:
- No hub required
- Wide range of voltage support
- A huge palette of colours, dimming options, and effects
- Compatible with Android, iOS, Amazon Alexa, Google Assistant, and home automation servers
- Designed to fit most standard electrical boxes and switches
This product is approved for use in Australia but must be installed by a licensed electrician.
SKU: SH-SHELLYRGBW2 -
Smart Lighting, Switches and Relays
Qubino Z-Wave 1 Relay
The?QUBINO Single Switch (by GOAP) is a Z-Wave module for switching on/off the electrical device (e.g. light, fan, etc …). The module can be controlled either through the Z-wave network or through the wall switch manually.
This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.
Supported switches
The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.
SKU: DHS-LIT-SWW-QUB-01 -
Smart Lighting, Switches and Relays
Fibaro Double Switch 2
The new Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave wireless module which can control two circuits each with a maximum load of 6.5A per channel and 10A total load per circuit.
- Control the ON-OFF function of two two independent circuits or appliances remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
- Latest generation Z-Wave 500 series chip
- Z-Wave Plus certification
- Very accurate energy measurement +/- 1 % for power above 5W
- Supports secure mode (Z-Wave Network Security) encrypted with AES-128
- No dry contacts – this is important. It means that the new FGS-223 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
SKU: DHS-LIT-SWW-FIB-022 -
Smart Lighting, Switches and Relays
Qubino Z-Wave 1D Relay
The?QUBINO 1D Relay Plus (by GOAP) is a single channel wireless Z-Wave relay with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve the range and stability of your Z-wave network. The module can be controlled either through the Z-wave network or through the wall switch manually.
This module is designed to be mounted behind a traditional wall switch. The module measures the power consumption of load and supports the connection of the digital temperature sensor. It is designed to act as a repeater in order to improve the range and stability of the Z-Wave network.Supported switches
The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.
SKU: DHS-LIT-SWW-QUB-01D -
Smart Lighting, Switches and Relays
Fibaro Single Switch 2
The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW.
- Control the ON-OFF function of a circuit remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
- control loads up to 2kW (8A)
The main differences in the FGS-213 are:
- Z-Wave Plus certification
- Has power monitoring
- 230V powered only (this is the same as the FGS-212)
- No dry contacts – this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
SKU: DHS-LIT-SWW-FIB-012 -
Smart Lighting, Switches and Relays
Aeotec Nano Sgl Switch InWall
Control any switch. From anywhere.?Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you?re not standing right next to them or can?t reach them, they?re limited.?No more. The future is smarter. So is your home. The?AEOTEC Nano Switch InWall?offers completely wireless control of your switches and sockets.
The?AEOTEC Nano Switch?offers total control, easily. Impossibly small, each?AEOTEC Nano Switch?installs invisibly behind any of your home?s existing switches or power sockets. Simply unscrew the faceplate, install the?AEOTEC Nano Switch?behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
SKU: DHS-LIT-SWW-AEO-01 -
Smart Lighting, Switches and Relays
Aeotec Nano Dbl Switch InWall
Control any switch. From anywhere.?Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you?re not standing right next to them or can?t reach them, they?re limited.
No more. The future is smarter. So is your home. The?AEOTEC Dual Nano Switch InWall?offers complete wireless control of your switches and sockets.
The?AEOTEC Nano Switch?offers total control, easily. Impossibly small, each?AEOTEC Dual Nano Switch?installs invisibly behind any of your home?s existing switches or power sockets. Simply unscrew the faceplate, install the?AEOTEC Nano Switch?behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
SKU: DHS-LIT-SWW-AEO-02
