No products in the basket.
Dimmer Modules
Dimmer Modules
Showing all 9 results
-
Dimmer Modules, Smart Lighting
Shelly Bypass
What is a Shelly Bypass Used For And Why Do I Need One
With the recent introduction of the Shelly 1L to the Shelly Home Automation range you may have noticed an add-on that is available specifically with the Shelly 1L called a Shelly Bypass. We sell the Shelly Bypass in the store as a standalone product or as an add-on with any Shelly 1L or Shelly Dimmer 2 devices but what actually are they and do you need one
The great thing with both the Shelly 1L and Shelly Dimmer 2 is they work without the need of a neutral line. That’s great news for us here in Australia if you are wanting to add a Shelly device behind a light switch where typically we do not have a neutral wire.
What is a Shelly Bypass
A Shelly Bypass is required where there is neutral wire and where the power consumption is less than 20 watts. If the load of the light is very low typically LED lights you need to add some form of load thats where the need of a bypass comes in
Rather than turning off the light the Shelly 1L and Shelly Dimmer 2 dim the light so low it stops glowing leaving a very small current flowing through the circuit of the Shelly Device to keep it running even when the light is off.
Do I need a Shelly Bypass
Most LED lightbulbs in Australia are under 20 watts. The Shelly 1L or Dimmer 2 require a minimum load to be able to power the module so if you are below this value then you will need one.
If you are using the Shelly 1L or the Shelly Dimmer 2 in a place with no neutral wire such as behind a light switch and you live in Australia yes you most likely do.
Where do I install the Shelly Bypass
If you are installing a Shelly Bypass in a lighting circuit in Australia you will need to attach the Shelly Bypass between the Output wire going to the lightbulb and the neutral going to the other side of the lightbulb. It will feel very unnatural to connect the wire this way. Most people in Australia have a ceiling rose or light fitting which allows the space for a Shelly Bypass. They are really small being only 39 mm x 23 mm x 7 mm.
Do I need a Shelly Bypass if I have a Neutral Wire
No you only need a Shelly Bypass where there is no Neutral wire.
What about Dimmable Loads do I need one to stop lights flickering
Yes if you are using Dimmable LEDs with less than 50 Watts total load they may be subject to flickering especially when dimmed down low. The bypass will stop this flickering.
If you have a Neutral wire you may wish to consider either the Shelly 1 or the Shelly 1PM unless you need the di
SKU: SH-SHELLYBYPASS -
Dimmer Modules, Smart Lighting
Shelly Dimmer 2
Shelly Dimmer 2 WiFi-operated dimmer
Control a wide range of halogen lights, dimmable LED and ferromagnetic transformers from anywhere with the smallest WiFi-operated dimmer in the world ? Shelly Dimmer2 working without a neutral line.
Shelly Dimmer2
- has an embedded webserver
- has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc.
- can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system’s component
- overload, and temperature protection
This product is approved for use in Australia but must be installed by a licensed electrician.
SKU: SH-SHELLYDIM -
Dimmer Modules, Smart Lighting
Fibaro Dimmer Bypass 2
The?Fibaro Dimmer Bypass 2?(FGB-002)?is a?supplementary?device to the?Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
- Easy to use and install
- Supports low power lamps such as LEDs or?energy saving compact fluorescent lamps
SKU: DHS-LIT-BPASS-FIB-2 -
Dimmer Modules, Smart Lighting
Aeotec Nano Dimmer InWall
The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controllers outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you?ll be amazed at just how much functionality we were able to craft inside.
Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don?t. But perfect lighting has never been easy.
Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you?ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you?re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache.
No more. Nano Dimmer offers smart, connected lighting without any of the hassles.
SKU: DHS-LIT-DMW-AEO -
Dimmer Modules, Smart Lighting
Qubino Z-Wave Dimmer 0-10V
The absolute best selling?QUBINO Z-Wave Dimmer 0-10V?(by GOAP) is unique. This Z-Wave product was developed to cater for the needs of Smart Home users looking for a Z-Wave solution that controls devices such as lights, fans and similar products with a 0-10V signal.?The QUBINO Flush Dimmer 0-10V is ideal for remotely dimming LED lights with low voltage ballast.
QUBINO?modules are ?install-and-forget? products. QUBINO are made to last, so we only select and use top-quality electronic components. These modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.
QUBINO Ltd. is a European company with 26-years experience in the automation field. With their expertise and passion for innovation in automation, they have developed a unique, ready to sell, certified and reliable portfolio of 14 Z-Wave wireless Smart Home products under different brands and OEMs around the world.SKU: DHS-LIT-DMW-QUB-010 -
Dimmer Modules, Smart Lighting
Qubino Z-Wave Dimmer
The?QUBINO Dimmer?(by GOAP) is the first MOSFET- switching light Z-Wave dimmer module that also supports control of low-voltage halogen lamps with electronic transformers, dimmable compact fluorescent lights and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor.
QUBINO?modules are ?install-and-forget? products. Our products are made to last, so we only select and use top-quality electronic components. These modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.
SKU: DHS-LIT-DMW-QUB -
Dimmer Modules, Smart Lighting
Fibaro RGBW Controller 2
The FIBARO Z-Wave RGBW Controller 2 is a wireless controller which enables you to manage your LED strips and halogen lights.
- Wirelessly control LEDs with an unlimited range of colour options
- Monitors energy usage
- Four analogue sensor inputs
- Four dimmer channels
- Acts as a repeater expanding your Z-Wave network
SKU: DHS-LIT-RGBW-FIB -
Dimmer Modules, Smart Lighting
Fibaro Dimmer 2
The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is the newest version of a popular wireless controller designed to operate behind a wall switch.
- Control the level of illumination of your light remotely or using a manual button (in two and three way configurations)
- Implemented algorithm of smart light source detection
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive re-wiring
- Active power and energy metering functionality
- Works with various types of manual buttons
- Active element: semiconductor electronic switch
SKU: DHS-LIT-DMW-FIB-02 -
Dimmer Modules, Smart Lighting
Aeotec Nano Dimmer Bypass
Stop dimmed lights flickering.
Dimming energy-saving lights is complicated ? there?s a lot of different technologies built into modern bulbs.
That?s why dimmed lights sometimes flicker or remain on ? power trickles through.?The?AEOTEC Dimmer Bypass?works with the?AEOTEC Nano Dimmer?to remove the signals from your power line that cause low-watt lightbulbs to flicker.If you want to control low-voltage lighting that?uses less than 4 Watts?using an?AEOTEC Nano Dimmer?you will need to include the?AEOTEC Dimmer Bypass?in your installation to ensure the lights do not flicker.
SKU: DHS-LIT-BPASS-AEO
