No products in the basket.
Welcome to the world of Fibaro, where smart living is made easy with their comprehensive, adaptable, and secure home automation ecosystem. Fibaro’s innovative wireless, modular devices provide the ultimate convenience, safety, and energy savings. Control your home effortlessly through voice commands, remote access, and easy Plug & Play installation. Experience a more comfortable life with Fibaro and enjoy the time for things that truly matter.
Fibaro
Showing 1–25 of 31 results
-
Multi-Sensors, Security Sensors, Smart Security
Fibaro Multi Sensor
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if the device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.
SKU: FGMS-001 -
Roller Shutter Automation, Smart Power
Fibaro Roller Shutter 3
The Fibaro Roller Shutter Controller is designed to control blind, awning, garage door and gate motors.
- Supports five different types of motor systems
- Precise positioning of blind or awning
- Automatic calibration
- Wireless control of AC motors with “three wires” interface
- Monitor and analyse energy usage
FIBARO Roller Shutter 3 (FGR-223) is a new Z-Wave Plus version of its predecessor model Fibaro Roller Shutter 2.
SKU: FGR-223 -
Smart Lighting, Switches and Relays
Fibaro Double Switch 2
The new Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave wireless module which can control two circuits each with a maximum load of 6.5A per channel and 10A total load per circuit.
- Control the ON-OFF function of two two independent circuits or appliances remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
- Latest generation Z-Wave 500 series chip
- Z-Wave Plus certification
- Very accurate energy measurement +/- 1 % for power above 5W
- Supports secure mode (Z-Wave Network Security) encrypted with AES-128
- No dry contacts – this is important. It means that the new FGS-223 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
SKU: FGS-223 -
Remotes & Buttons, Smart Controllers
Fibaro Button (Black)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-2 -
Home Automation Hubs, Smart Controllers
Fibaro Nice Yubii Home
- Fibaro Home Automation Hub
- Z-Wave Technology used for communication between devices.
- Works with 3000 products of other brands
- Enhance the security, comfort, and efficiency of your home
- Includes a host of data security features
SKU: DHS-CON-YUBII-NICE -
Home Automation Hubs, Smart Controllers
Fibaro Home Center 3
- Fibaro Home Automation Hub
- Z-Wave Technology used for communication between devices
- Works with a host of third-party smart devices
- Enhance the security, comfort, and efficiency of your home
- Includes a host of data security features
SKU: FGHC3 -
Dimmer Modules, Smart Lighting
Fibaro Dimmer Bypass 2
The?Fibaro Dimmer Bypass 2?(FGB-002)?is a?supplementary?device to the?Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
- Easy to use and install
- Supports low power lamps such as LEDs or?energy saving compact fluorescent lamps
SKU: FGB-002 -
Door/window Sensors, Security Sensors, Smart Security
Fibaro D/W Sensor 2 (White)
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
- Completely wireless
- Automatic software updates
- Includes a built in temperature sensor
- Comes in multiple colours
- Tamper and low battery alarm notification
SKU: FGDW-002-1 -
Door/window Sensors, Security Sensors, Smart Security
Fibaro D/W Sensor 2 (Beige)
The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
- Completely wireless
- Automatic software updates
- Includes a built in temperature sensor
- Comes in multiple colours
- Tamper and low battery alarm notification
The?Beige D/W sensor is the device in the middle in this products thumbnail.
SKU: FGDW-002-4 -
Door/window Sensors, Security Sensors, Smart Security
Fibaro HomeKit Door/Window Sensor
The Fibaro Door/Window Sensor is a HomeKit-enabled contact sensor using Bluetooth low energy technology. Along with detecting positioning and opening/closing, the sensor also measures temperature. Opening of a door or window is detected by separating the sensor?s body and magnet. The Fibaro Door / Window Sensor is battery powered and designed to be installed quickly and easily on any surface.
SKU: FGBHDW-002-1 -
HomeKit, Remotes & Buttons, Smart Controllers
Fibaro HomeKit Button – Black
With a simple tap, the Fibaro Homekit Button lets you control various HomeKit-enabled devices such as lighting, fans, window shades, and locks. You can also run scenes, triggering them with one tap, two taps, or by holding the button down. Conveniently place or mount the Button anywhere in your house, such as a bedside nightstand, kids’ room, or kitchen counter. The Button also comes in different colors for easily assigning family members individual buttons programmed with their own personal commands.
SKU: FGHPB-101-2 -
HomeKit, Remotes & Buttons, Smart Controllers
Fibaro HomeKit Button – White
With a simple tap, the Fibaro Homekit Button lets you control various HomeKit-enabled devices such as lighting, fans, window shades, and locks. You can also run scenes, triggering them with one tap, two taps, or by holding the button down. Conveniently place or mount the Button anywhere in your houses, such as a bedside nightstand, kids’ room, or kitchen counter. The Button also comes in different colours for easily assigning family members individual buttons programmed with their own personal commands.
SKU: FGHPB-101-1 -
Remotes & Buttons, Smart Controllers
Fibaro Button (Orange)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-8 -
Remotes & Buttons, Smart Controllers
Fibaro Button (Brown)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-7 -
Remotes & Buttons, Smart Controllers
Fibaro Button (Green)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-5 -
Smart Controllers, Wall Mounted Controllers
Fibaro Swipe Pad White
FIBARO Swipe is a wireless, battery powered gesture-controlled pad that allows you to activate Z-Wave scenes or commands with a simple wave of the hand.
FIBARO Swipe has the appearance of a small tablet but instead of a touchscreen, it uses sophisticated motion identification technology to respond to six distinct hand gestures including four directional swipes (up, down, left, right), and two circular motions (left, right). A single gesture or a combination of gestures may be used ? for example, swipe ?down? to turn off the lights, ?up? to open your blinds. With four short swipes, the living room is transformed into a home theater! Swipe?s only limit is your imagination.
- Z-Wave Plus certified contactless gesture control
- May be used with wet or dirty hands ? e.g. turn on the lights in the kitchen or bathroom without getting the switches or wall dirty
- Endless control possibilities ? e.g. wave goodbye to activate your ?going out? scene, swipe up to raise the volume on your sound system, swipe down to close difficult to reach skylight windows, reach out your hand from bed in the morning to activate your coffee machine
- Endless placement possibilities ? e.g. visible on the dresser or a wall with your favourite family photos, or hidden away under the kitchen counter or coffee table
- Powered by 4xAA batteries or Micro-USB giving you ultimate flexibility
- Available in black or white
SKU: DHS-CON-SCON-FIB -
Smart Lighting, Switches and Relays
Fibaro Single Switch 2
The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW.
- Control the ON-OFF function of a circuit remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
- control loads up to 2kW (8A)
The main differences in the FGS-213 are:
- Z-Wave Plus certification
- Has power monitoring
- 230V powered only (this is the same as the FGS-212)
- No dry contacts – this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.
SKU: FGS-213 -
Dimmer Modules, Smart Lighting
Fibaro RGBW Controller 2
The FIBARO Z-Wave RGBW Controller 2 is a wireless controller which enables you to manage your LED strips and halogen lights.
- Wirelessly control LEDs with an unlimited range of colour options
- Monitors energy usage
- Four analogue sensor inputs
- Four dimmer channels
- Acts as a repeater expanding your Z-Wave network
SKU: FGRGBM-2 -
Home Automation Bridges, Smart Controllers
Fibaro Implant
FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication.
You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller.
It can also control devices by opening/closing output contacts independently of the inputs.SKU: FGBS-222 -
Flood Fire & Gas Safety, Smart Safety, Water & Flood Detectors
Fibaro Flood Sensor
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 VDC).
A flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening an NC contact.
The device has built in temperature sensor, monitoring the temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood sensor probe extended by a connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signals in case of substantial inundation of water.SKU: FGFS-101 -
Dimmer Modules, Smart Lighting
Fibaro Dimmer 2
The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is the newest version of a popular wireless controller designed to operate behind a wall switch.
- Control the level of illumination of your light remotely or using a manual button (in two and three way configurations)
- Implemented algorithm of smart light source detection
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive re-wiring
- Active power and energy metering functionality
- Works with various types of manual buttons
- Active element: semiconductor electronic switch
SKU: FGD-212 -
Remotes & Buttons, Smart Controllers
Fibaro Button (Yellow)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-4 -
Remotes & Buttons, Smart Controllers
Fibaro Button (White)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-1 -
Remotes & Buttons, Smart Controllers
Fibaro Button (Red)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-3 -
Remotes & Buttons, Smart Controllers
Fibaro Button (Blue)
The FIBARO Button is a compact, battery powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
- Completely wireless
- Z-Wave Plus certified
- Supports 6 different actions/scenes
- Available in multiple colours (white, black, red, blue, yellow)
SKU: FGPB-101-6
