Shelly Pro 3
Smart Lighting, Switches and Relays
Shelly 2.50 out of 5(0)
SHELLY 2.5 RELAY SWITCH, ROLLER SHUTTER 2X10A
- Wi-Fi Connected
- For two electrical circuits (up to 2.3 kW each) with energy consumption monitoring
- Mobile App Control
- REST API to connect Shelly with your existing home automation system
- Wide range of AC and DC power supply: 110-230V ? 10, 50 / 60Hz AC or 24-60V DC
Control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, heating radiators, air conditioners, etc.) from anywhere with the smallest WiFi-operated double relay switch with roller shutter functionality in the world ? Shelly 2.5
Shelly 2.5 WiFi Double Relay Switch Roller Shutter, Neutral wire is required.
Has an embedded web server;
Has been designed for installation in a limited space, such as wall mounts, electrical control panels, etc;
Can be used for two electrical circuits (up to 2.3 kW each) with energy consumption monitoring for each channel, overload, and temperature protection.
Can operate as a bi-directional motor control module (for drapes, blinds, garage doors, etc.).
Can function as a standalone device, as an accessory to a home automation controller, or it may be used as another automation system?s component.
- Intelligent On/Off
- Power Supply: 110-230V ?10, 50/60Hz AC and 24-60V DC
- Compatible with all major international voltage standards.
- 2 Channels ? Maximum load current per output: 10A / 230V 50/60Hz.
- Complies with the following EU standards: RE Directive 2014/53/EU, LVD 2006/95/WE, EMC 2004/108/WE, RoHS2 2011/65/UE
- Operational temperature: -40 to +40 ?C
- Dimensions (LxWxH): 39 x 36 x 17 mm
- Minimum mounting opening: ? ? 50mm
- Radio signal power: 1mW
- Wireless/WiFi Protocol: 802.11 b/g/n
- Radio frequency: 2400 ? 2500 MHz
- Range: up to 50 m outdoors and up to 30 m indoors (depending on the building materials)
- Electrical power consumption < 1 W
- Microprocessor control
- Independent dual power metering for each channel
- Overload and temperature protection
- Can connect to any Wi-Fi network or can operate as an Access Point
- Controlled via WiFi and a mobile phone, computer, automation system or any other device supporting HTTP and/or UDP protocol
- Controlled elements: 2 electrical circuits
- Executive elements: 2 relays
- Can be operated along with momentary keys or push-button switches
- Has an integrated precise power meter.
This product is approved for use in Australia but must be installed by a licensed electrician.SKU: SH-SHELLY25$39.99
Energy Monitoring, Smart Power
50A Current Transformer0 out of 5(0)
50A Clamp for Shelly EM
Current transformers scale the large values of current to small standardized values for measuring purposes. They provide a secondary current that is accurately proportional to the current flowing in its primary circuit. The current transformer presents a negligible load to the primary circuit.
- Core Ferrite core
- Electrical Strength 3000 VAC at 1 mA 60s
- Internal diameter10mm
- Load Resistance20Ω
- 50A rated primary current
- Rated Secondary Current 16.67 mA
- Saturation current ≥ 85A
Please note You must have a Shelly EM for this to have functionality.SKU: SH-EMCLAMP-50A$24.99
Dimmer Modules, Smart Lighting
Shelly Bypass0 out of 5(0)
What is a Shelly Bypass Used For And Why Do I Need One
With the recent introduction of the Shelly 1L to the Shelly Home Automation range you may have noticed an add-on that is available specifically with the Shelly 1L called a Shelly Bypass. We sell the Shelly Bypass in the store as a standalone product or as an add-on with any Shelly 1L or Shelly Dimmer 2 devices but what actually are they and do you need one
The great thing with both the Shelly 1L and Shelly Dimmer 2 is they work without the need of a neutral line. That’s great news for us here in Australia if you are wanting to add a Shelly device behind a light switch where typically we do not have a neutral wire.
What is a Shelly Bypass
A Shelly Bypass is required where there is neutral wire and where the power consumption is less than 20 watts. If the load of the light is very low typically LED lights you need to add some form of load thats where the need of a bypass comes in
Rather than turning off the light the Shelly 1L and Shelly Dimmer 2 dim the light so low it stops glowing leaving a very small current flowing through the circuit of the Shelly Device to keep it running even when the light is off.
Do I need a Shelly Bypass
Most LED lightbulbs in Australia are under 20 watts. The Shelly 1L or Dimmer 2 require a minimum load to be able to power the module so if you are below this value then you will need one.
If you are using the Shelly 1L or the Shelly Dimmer 2 in a place with no neutral wire such as behind a light switch and you live in Australia yes you most likely do.
Where do I install the Shelly Bypass
If you are installing a Shelly Bypass in a lighting circuit in Australia you will need to attach the Shelly Bypass between the Output wire going to the lightbulb and the neutral going to the other side of the lightbulb. It will feel very unnatural to connect the wire this way. Most people in Australia have a ceiling rose or light fitting which allows the space for a Shelly Bypass. They are really small being only 39 mm x 23 mm x 7 mm.
Do I need a Shelly Bypass if I have a Neutral Wire
No you only need a Shelly Bypass where there is no Neutral wire.
What about Dimmable Loads do I need one to stop lights flickering
Yes if you are using Dimmable LEDs with less than 50 Watts total load they may be subject to flickering especially when dimmed down low. The bypass will stop this flickering.
If you have a Neutral wire you may wish to consider either the Shelly 1 or the Shelly 1PM unless you need the diSKU: SH-SHELLYBYPASS$9.99
Smart Climate Control, Temperature Sensors
Shelly H&T – White0 out of 5(0)
Shelly Humidity & Temperature Sensor H&S?Smart Home Automation WiFi Solution
Shelly Humidity & Temperature Sensor?helps with monitoring changes in humidity and temperature while avoiding dryness and keeping comfortable conditions at your home.
Wireless: Connect Shelly Humidity & Temperature Sensor directly to your Wi-Fi network, without the need for any additional controller.
Humidity: Monitor excessive changes in humidity. Avoid dryness and conditions for mould growth.
Temperature control: Be aware of temperature fluctuations and keep your home comfortable at any time.
Easy to use: The only thing you need to manage your Shelly H&T is a mobile phone and the Shelly Cloud app.
Long-lasting battery: Feel more comfortable with Shelly H&T?s long-lasting battery life of up to 16 months.
With Shelly Humidity & Temperature Sensor you can see recorded data for humidity and temperature for up to a year.
USB power supply: An optional accessory that allows you to power the device with a cable instead of a battery
Monitor remotely: Monitor your home, no matter where you are via the Shelly Cloud app and your phone. It can be integrated to work with all other Shelly devices.
CONTROL ANY ELECTRIC HEATER
Turn the cheapest heaters into the smartest devices with?Shelly Humidity & Temperature Sensor and Shelly Plug – you can automatically control any electric heater.
Shelly Humidity & Temperature Sensor records all the data for humidity and temperature.
Long-Lasting Battery Life
A perfect design combined with a battery lasting up to 16 months keeps your home always comfortable.
Shelly Humidity & Temperature Sensor (H&T) is open to the world and developers. Shellys are secured but at the same time give everyone the opportunity to use them easily in new and existing projects. With the embedded web server and the HTTP commands Shelly can be made compatible with your existing home automation system.
This product is approved for use in Australia but must be installed by a licensed electrician.SKU: SH-SHELLYHTW$44.99